Specification Sheet

Pre-Rinse Faucets
CER-TECK® 102 mm (4") Center Deckmount Base
Faucet
Model No: 55C1313
SPECIFICATION:
•
102mm(4") center two handle DECKMOUNT pre-rinse faucet
•
Cast brass body
•
Inlet check tails to prevent crossflow
•
Polish chrome plated finish
•
CER-TECK® ceramic structures
•
90% flow with first 1/4 turn of operation
•
Positive shutoff even in poor water conditions
•
Handle#: 3 - 76 mm (3") Lever Blade Handles-ADA Compliant-Metal-Color
indexed-Vandal Resistant screws
•
Self Close Pre-Rinse Spray with spring loaded stainless steel hose w/wall
bracket & spray head hook
COMPLIES WITH:
•
CSA certified.
•
Complies to ASME A112.18.1
•
IAPMO listed
•
(Contact Delta Representative for State and/or Local Approvals)
•
3 " lever blade handle {ADA}ADA compliant and meets Handicapped
Accessibility Standard ASME A117.1 of less than 5 lbs. operating force
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area.
- 1.0.1911
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]