Specification Sheet

Pre-Rinse Faucets
CER-TECK® 102 mm (4") Center Deckmount Base
Faucet
Model No: 55C1383
SPECIFICATION:
•
102mm(4") center two handle DECKMOUNT pre-rinse faucet
•
Cast brass body
•
Inlet check tails to prevent crossflow
•
Polish chrome plated finish
•
CER-TECK® ceramic structures
•
Both standard 1.6 USGPM & Energy Saver 1.2 USGPM @ 60 PSI pre-rinse
spray outlets included
•
Spout: S5 - 203mm (8") Tubular Swing Spout(S5)
•
Handle#: 3 - 76 mm (3") Lever Blade Handles-ADA Compliant-Metal-Color
indexed-Vandal Resistant screws
•
Self Close Pre-Rinse Spray with spring loaded stainless steel hose, add-on
faucet with standard 8" tubular spout and 1.5 USGPM (5.7 L/min) aerator
COMPLIES WITH:
•
CSA certified.
•
Complies to ASME A112.18.1/CSA B125.1
•
Energy Saver Spray certified to ASTM F2324-03 in accordance with the
Energy Policy Act of 2005
•
Verified compliant with 0.25% weighted average Pb content regulations
•
Indicates compliance to ICC/ANSI A117.1
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
NOTES:
Verified compliant with 0.25% weighted average Pb content regulations
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced January 10, 2017.
- 1.0.25277
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]