Exploded Parts

ManualsBrandsDelta ManualsBathCommercial Battery-Powered Touchless Lavatory Faucet in Chrome with Proximity Sensing Technology

Page 1

205858 Rev. A

-PLGHDF

__ __

Write purchase model number here for future reference

PLEASE LEAVE this M&I Sheet with the owner, maintenance plumber, etc. as

items relating to ongoing maintenance suggestions and procedures are included.

061155A

3/8” FIP x 3/8”

Connector

060416A

Bypass Adapter

060683A

24VAC to 6VDC Converter

060905A

Cover

Gasket

060906A

Surface

Mount

Housing

062002A

Proximity

Driver Board

063127A

Solenoid Valve

with 3/8”

Compression

Connectors

060908A

Solenoid Holder

060909A

Screen Assembly

063128A

Battery Box Assembly less driver

board and battery holder

060638A

Vandal Resistant Laminar Outlet

with Antimicrobial by Agion

060640A

Vandal Resistant Flow Control

Aerator and Wrench

060642A

Flow Control Aerator

RP31704

Spray Outlet with

Wrench (0.5 GPM) -

Vandal Resistant

060566A

Optional Spray Outlet with

Wrench (1.0 GPM) -

Vandal Resistant

NOTE: For optimum performance of this product, we

recommend a system pressure between 20 and 80 PSI

static. This product will operate up to a maximum of

125 PSI static per ANSI and CSA requirements. However,

we do not recommend pressure above 80 PSI. Thermal

expansion or leaking pressure reducing valves may

require use of expansion tanks or relief valves to ensure

your system never exceeds its maximum intended

pressure setting.

205858 205858 205858 205858

061047A

24VAC to 6VDC Converter

with Battery Backup

062029A

Ground Wire Kit (for hardwire models)

OPTION LIST

060684A

Square Battery Holder

060571A

Mounting Hardware

TRANSFORMERS

060704A

Transformer 110 to 24 VAC 20VA

up to 5 Electronic Valves

060771A

Transformer 110 to 24 VAC 40VA

up to 10 Electronic Valves

060772A

Transformer 110 to 24 VAC 100VA

up to 25 Electronic Valves

062032A

Braided

Polymer Hose

DECK PLATES

060548A

4” Deck Plate Gasket (6/pkg)

061159A

4” Deck Plate & Holddown Pkg.

060549A

8” Deck Plate Gasket (6/pkg)

061160A

8” Deck Plate & Holddown Pkg.

RP6092

Nut & Washer

061159A

4” Deck Plate

& Holddown Pkg

061160A

8” Deck Plate

& Holddown Pkg

062001A

Proximity Thin

Tab & Nut

060765A

Wrench

063129A

HDF Spout Assembly

for Proximity

061175A

Spacer package for

HDF Proximity

RP30522

Gasket

Summary of content (6 pages)

PAGE 1
59 __ -PLGHDF __ __ 205858 061159A 4” Deck Plate & Holddown Pkg 063129A HDF Spout Assembly for Proximity 205858 Write purchase model number here for future reference 060640A Vandal Resistant Flow Control Aerator and Wrench RP6092 Nut & Washer 060642A Flow Control Aerator 060566A Optional Spray Outlet with Wrench (1.0 GPM) Vandal Resistant 205858 205858 RP31704 Spray Outlet with Wrench (0.
PAGE 2
Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATION AND SET UP INSTRUCTIONS STEP 1. FAUCET INSTALLATION Fig. 1 Mount faucet to sink using the provided components in the following order - grey bottom spacer, thin capacitance tab, lock nut (Fig. 1). NOTE: The black top spacer must be used at all times between the spout and countertop, and the grey spacer must be used at all times between the thin tab and deck.
PAGE 3
Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATION AND SET UP INSTRUCTIONS STEP 7b. CALIBRATION After power is applied to the driver board, it generates 5 quick beeps 3 times which prompts the installer to step away from the unit. During this process the water will turn ON for approximately 10 seconds and proceed to shut off. An additional 5 beeps once will then be heard indicating calibration is complete. Ļ STEP 8.
PAGE 4
Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATION AND SET UP INSTRUCTIONS STEP 10. MAKING ADJUSTMENTS Since some sink types (i.e. stainless steel) are made of a conductive material, and some installations may be near other foreign conductive materials. Adjustments to the sensitivity of the electrical field may be required to ensure a consistent operation.
PAGE 5
TROUBLE SHOOTING GUIDE If the faucet does not work properly, follow the steps below in order. Note: A polymer braided hose (062032A) is the recommended inlet connection to the solenoid valve. Check to ensure faucet was installed according to the M&I. Note: See instructions on pages 1 to 4. Test for operation. If unit does not operate: Verify the following: ½” thick spacers (061175A) are in place; black spacer on top and grey spacer on the bottom of the sink or counter.
PAGE 6
Delta Commercial Faucet Limited Warranty All parts of the Delta® HDF® and TECK® faucets are warranted to the original consumer purchaser to be free from defects in material, finish and workmanship for a period of five (5) years unless otherwise specifically stated in the catalogue and price book. This warranty is made to the original consumer purchaser and shall be effective from date of purchase as shown on purchaser’s receipt.