Exploded Parts

ManualsBrandsDelta ManualsCommercial ProductsDelta Commercial Single Hole Electronic Bathroom Faucet

Page 1

207466 Rev. A

590T_ _ _ _

Write purchase model number here for future reference

NOTE: For optimum performance of this product, we recommend a

system pressure between 20 and 80 PSI static. This product will

operate up to a maximum of 125 PSI static per ANSI and CSA

requirements. However, we do not recommend pressure above 80

PSI. Thermal expansion or leaking pressure reducing valves may

require the use of expansion tanks or relief valves to ensure your

system never exceeds its maximum intended pressure setting.

RP30523

Braided Hose

063131A

3/8” x 3/8”

Compression

Connector,

Nut and

Ferrule

060765A

Wrench

060683A

24 VAC/6.4 VDC

Converter

060416A

Bypass

Adapter

Fig. 1

063127A

Solenoid

Valve with

3/8”

Compression

Connectors

060690A

36” Cable Extension

Accessories

063132A

Spout Assembly

OPTION LIST

TRANSFORMERS

060704A

Transformer 110 to 24 VAC 20VA

up to 5 Electronic Valves

060771A

Transformer 110 to 24 VAC 40VA

up to 10 Electronic Valves

060772A

Transformer 110 to 24 VAC 100VA

up to 25 Electronic Valves

DECK PLATES

060548A

4” Deck Plate Gasket (6/pkg)

060546A

4” Deck Plate & Hold-Down Pkg

060549A

8” Deck Plate Gasket (6/pkg)

060547A

8” Deck Plate & Hold-Down Pkg

060681A

Battery Holder

060571A

Mounting Hardware

060905A

Cover

Gasket

060906A

Surface

Mount

Housing

060907A

Driver Board

063127A

Solenoid Valve

with 3/8”

Compression

Connectors

060908A

Solenoid Holder

060909A

Screen Assembly

060564A

Single Hole Deck

Gasket (6/pkg)

RP60877

Nut and Washer

207466 207466 207466 207466

Note: See page 3

for parts breakdown

on recessed mount

boxes.

060546A

4” Deck Plate and

Hold-Down Package

060547A

8” Deck Plate and

Hold-Down Package

RP6092

Nut and Washer

060638A

Vandal Resistant Laminar Outlet

with Antimicrobial by Agion

060640A

Vandal Resistant Flow Control

Aerator and Wrench

RP31704

Spray Outlet w/Wrench 0.5 GPM -

Vandal Resistant

060566A

Optional Spray Outlet w/Wrench

1.0 GPM - Vandal Resistant

PLEASE LEAVE this M&I Sheet with the owner, maintenance plumber, etc. as

items relating to ongoing maintenance suggestions and procedures are included.

www.specselect.com

063128A

Battery Box Assembly less driver

board and battery holder

Summary of content (7 pages)

PAGE 1
590T_ _ _ _ 063132A Spout Assembly 207466 Note: See page 3 for parts breakdown on recessed mount boxes. RP31704 Spray Outlet w/Wrench 0.5 GPM Vandal Resistant 060566A Optional Spray Outlet w/Wrench 1.
PAGE 2
Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATION AND SET UP INSTRUCTIONS FOR SURFACE MOUNT HOUSING: CONTROL BOX #0 STEP 1. FAUCET INSTALLATION 13" (331 mm) Max. 7" (178 mm) Max. Connect 20” braided hose to spout inlet. Clean deck/sink surface where faucet will be mounted. Mount faucet to sink using nut(s) and washer(s) provided.
PAGE 3
Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATON AND SET UP INSTRUCTIONS FOR RECESS MOUNT HOUSING: CONTROL BOXES #1 & 8 STEP 1. ROUGH IN Note: Wires connecting between box(es) and from transformer must be protected from abrasion, and being pulled at connections. They also may have to be fished through at a later stage of construction.
PAGE 4
INSTALLATION AND SET UP INSTRUCTIONS FOR RECESS MOUNT HOUSING: CONTROL BOXES #1 & 8 STEP 3. CONNECT WATER SUPPLY Fig. 8 Install sink and connect drainage to rough in. See applicable Fig. 6 or Fig. 7. Please note that the connection tube and fittings are supplied by the installer to connect the 3/8” MIP at the box outlet and compression joint for 3/8” O.D. soft copper tube at the spout. Connect water supply through to spout. Assure supply lines are completely flushed and free of debris. Sensor STEP 4.
PAGE 5
INSTALLATION AND SET UP INSTRUCTIONS FOR RECESS MOUNT HOUSING: CONTROL BOXES #1 & 8 STEP 6. SERVICES Operation Illustration Open screwdriver stop(s). Flush line. Install aerator. Minimum Recommended Distance 9" (229mm) STEP 7. TEST FOR OPERATION Sensing Zone 9" (228mm) default Test for operation. If unit does not work properly, see Troubleshooting Guide on page 6. STEP 8. MAKING ADJUSTMENTS 1" (25mm) (If adjustments are required. Note factory defaults for program shown in Quick Reference Chart.
PAGE 6
CARE INSTRUCTIONS This Delta Commercial faucet is designed and engineered in accordance with the highest quality and performance standards. With proper care, it will give you years of trouble free service. Care should be given to the cleaning of this product. Although the chrome finish is extremely durable, it can be DAMAGED by ACIDIC CLEANERS (i.e. cleaners designed specifically for vitreous china lavatories and water closets), HARSH ABRASIVES or POLISH.
PAGE 7
Delta Commercial Faucet Limited Warranty All parts of the Delta® HDF® and TECK® faucets are warranted to the original consumer purchaser to be free from defects in material, finish and workmanship for a period of five (5) years unless otherwise specifically stated in the catalogue and price book. This warranty is made to the original consumer purchaser and shall be effective from date of purchase as shown on purchaser’s receipt.