Specification Sheet

ManualsBrandsDelta ManualsCommercial ProductsDelta Commercial Centerset Electronic Lavatory Faucet with Proximity Sensing Technology

Page 4.C.82

Delta reserves the right (1) to make changes in speciﬁcations and materials, and (2) to change or discontinue models, both without notice or obligation.

Dimensions are for reference only. See current full-line price book or www.specselect.com for ﬁnish options and product availability.

DSP–590-PHDF Rev. F

Electronic Proximity

Sensing

Technology Lavatory Faucets

Note: Measurements may vary ± 6mm (0.25")

Batteries included on all battery models. Flow Rates are at 60 PSI.

Note: Use this page as a product submittal sheet.

Refer to www.specselect.com for individual models.

Note: Measurements may vary ± 6mm (0.25")

SPECIFICATION: (example)

• Deck mount electronic lavatory faucet

• All metal spout construction

• Proximity

Sensing Technology

• Hardwire units supplied with 24 VAC to 6 VDC

converter (Transformer required). (Specify separately).

• Battery units supplied with 4 “AA” cell batteries

• Surface mount control box

• Mixing valve required (Order separately)

• Vandal resistant 0.5 gpm (1.9 L/min) laminar outlet

591-P Series

• 4" (102mm) centers

• Forged coverplate with anti-rotation pin

❏ 591-PLGHDF (Battery)

❏ 591-PLGHDFHW (Hardwire)

592-P Series

• 8" (203mm) centers

• Forged coverplate with anti-rotation pin)

❏ 592-PLGHDF (Battery)

❏ 592-PLGHDFHW (Hardwire)

OPERATION:

• Hands free (touchless) operation.

• No visible sensor, the spout is the sensor.

• Water flows when sensing is activated.

• Water flow stops upon de-activation of sensing.

• Adjustable sensing distance factory set to 76 mm (3").

• Low battery audible beep (for battery models

only) will activate after faucet shuts off when

approximately1500 cycles remain.

• Adjustable auto shut off feature. Factory set to

45 seconds.

• Metering mode with selectable flow times of

7 seconds to 4 minutes, factory set off.

• Periodic Rinse feature, time adjustable in 6 hour

increments up to 2 days. Selectable rinsing lengths

from 10 to 180 seconds. Factory set off.

NOTE 1: For optimum performance of this product, we recommend

a system pressure between 20 and 80 PSI static. This product

will operate up to a maximum of 125 PSI static per ANSI and CSA

requirements. However, we do not recommend pressures above 80 PSI.

Thermal expansion or leaking pressure reducing valves may require use

of expansion tanks or relief valves to ensure your system never exceeds

its maximum intended pressure setting.

NOTE 2: Designed for routine 180°F (82°C) disinfection cycles up to

10 minutes.

NOTE 3: Hardwire Proximity models not for use on enamel covered

metal sinks.

2.5

1.5

10 20 30 40 50 60 70 80

Line Pressure (psig)

Outlet Flow Rates

FLOW

(L/min)

FLOW

(GPM)

FLOW RATE vs PRESSURE

3/8"

Compression

Connection

Outlet

Inlet 3/8" NPT or

3/8" Compression

Adaptor (Supplied)

36 mm

(1.43")

Battery Pack

1/8" Allen Screw

Recommended

381 mm

(15" max.) to

top of counter

146 mm

(5.73")

89 mm

(3.5")

MAX.

101 mm

(3.96")

139 mm

(5.47")

Battery Operated – Box shown.

Hardwire Version comes complete with Watertight

Connector and Hardwire Converter 24VAC to 6VDC.

Hardwire with Battery Backup

❏ Add suffix ”-BB” to product number

Available on Hardwire models only.

See DSP-BB for detailed specification.

VANDAL PROOF SURFACE MOUNT HOUSING

591-P & 592-P SERIES

ELECTRONIC DECK MOUNT LAVATORY FAUCET

FRONT VIEW

591-P & 592-P SERIES

TYPICAL INSTALLATION

SIDE VIEW

Approvals:

•

CSA certified

•

Complies to ASME A112.18.1/CSA B125.1

•

Indicates compliance to

ICC/ANSI A117.1

•

Verified compliant with 0.25% weighted average Pb

content regulations

( Contact Delta Representative for State and/or

Local Approvals.)

Patented

50 mm

(2.0")

Max

Deck

Thickness

32 mm

(1.25") Dia.

3 Holes

required

56 mm

(2.22")

4" COVERPLATE

102 mm (4.0")

8" COVERPLATE

203 mm (8.0")

4" COVERPLATE

191 mm (7.5")

8" COVERPLATE

282 mm (11.1")

3/8"

Compression

Connection

330 mm

(13.0")

MAX.

178 mm

(7.0")

MAX.

Sensor

Wire

508 mm

(20.0") Dia.

Braided

Polymer Hose

3/8"

Compression

Connection

98 mm

(3.9")

134 mm

(5.3")

125 mm

(4.9")

63 mm

(2.5")

64 mm

(2.5")

Max Deck

Thickness

139 mm

(5.5")

Available Option

for Field Conversion

❏ 060651A

3 Position Switch

See DSP-ELACC for

detailed specification.