Specification

Victorian

MATERIALS: Base Plate, Bell and Hook - Zinc Die Cast

Wall Plate - Zinc Die Cast

INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied

fasteners. Slip product over wall plate(s) and tighten set screws until secure.

OPTIONAL FASTENER INFORMATION:

Wood blocking is preferable behind all wall surfaces. If wood blocking is not

available, the following fasteners are suggested: Tile/Masonry - Plastic or

Lead Anchors, Plaster/Drywall - Toggle Bolts.

SPECIFICATION: Surface mounted double robe hook shall be model__________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

DOUBLE ROBE HOOK

TECHNICAL DATA

Victorian

MATERIALS: Lever - Zinc Die Cast, Plated Finish

Nut Insert and Screw - Zinc Die Cast

Rod - Brass

INSTALLATION: Unscrew and remove nut. Insert unit into the flush lever tank hole.

Screw on new nut supplied.

SPECIFICATION: Flush lever - front mount shall be model__________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

FLUSH LEVER - FRONT MOUNT

3-1/16"

77.7 mm

3-7/8"

98.4 mm

3-11/16"

93.6 mm

2-1/8"

53.9 mm

2-15/16"

74.6 mm

3-3/8"

85.7 mm

11-5/8"

295.2 mm

2-7/8"

73 mm

1-11/16"

42.8 mm

27/32"

21.4 mm