Installation Guide

20
Install center divider (I) to bottom track (H) and secure
with screw (NN).
Apply silicone to center guide for additional support.
Installer le diviseur central (I) sur le rail inférieur (H) et
fixer avec une vis (NN).
Appliquer du silicone sur le guide central pour un soutien
supplémentaire.
Instale un divisor central (I) en el riel inferior (H) y sujételo
con un tornillo (NN).
Aplique silicona en la guía central para un mayor apoyo.
On the underside of bottom track (H), locate the center.
Mark this center location in the curved groove using
pencil or other marking tool (such as masking tape).
IMPORTANT: Using the groove for alignment, drill a 1/8"
hole at this location.
Sur le dessous du rail inférieur (H), localiser le centre.
Marquez cet emplacement central dans la rainure
incurvée avec un crayon ou autre outil de marquage
(comme du ruban adhésif).
IMPORTANT : En vous alignant avec la rainure, percez
un trou de 1/8 po (0,23 cm) à cet endroit.
En la cara inferior del riel inferior (H), ubique el centro.
Marque esta ubicación central en el surco curvo con un
lápiz u otro elemento para marcar (como una cinta de
enmascarar).
IMPORTANTE: utilizando el surco para alinear, perfore
un orificio de 1/8" (0,23 cm) en esta ubicación.
1
2
19
H
NN
I
18
H
H
1 2
1/8"