Specification Sheet

ManualsBrandsDelta ManualsCommercial ProductsDelta 1.6 GPF 1-1/2" Top Spud Water Closet Flush Valve with 11-1/2" Maximum Height and Seat Lid Bumper from the Commercial Series

Exposed Teck

Flush Valve

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.

Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.

DSP-81T201

Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.

Engineer/Architect Approval

Model Specified:

Approval: Date:

Note: Measurements may vary ± 6mm (0.25'')

Specification: (example)

(FOR 1-1/2'' TOP INLET CLOSET FIXTURE)

• Quiet action, TECK

exposed diaphragm flush valve

• Chloramine resistant diaphragm

• Forged brass diaphragm retainer

• Renewable seat

• Polished chrome plated finish

• External water conserving flush volume adjustment,

(except -48 and -6 models) factory set at 60 PSI to 6 litre (1.6 US gal.)

• Vandal resistant cover screw

• Metal “non hold open” handle

• 1" FIP/copper sweat inlet adaptor angle check stop with

protecting cap

• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'') inlet/valve

outlet centers

• Vacuum breaker

• Cover tube and SIS wall flange, spud flange and concealed spud nut

WITH 292mm (11-1/2'') LENGTH:

❏ 81T201

As above

❏ 81T201-1

Same as 81T201, but with trap seal primer tee

❏ 81T201-5

Same as 81T201, but with center cover bumper

❏ 81T201-6

Same as 81T201, but Not Field Adjustable

❏ 81T201-48

Same as 81T201, but factory set at 60 PSI to 4.8 litre

(1.27 US gal.), Not Field Adjustable

❏ 81T201-56

Same as 81T201-5, but Not Field Adjustable

❏ 81T201-548

Same as 81T201-5, but factory set at 60 PSI to 4.8 litre

(1.27 US gal.), Not Field Adjustable

With 610mm (24'') LENGTH

❏ 81T221

As above

❏ 81T221-1

Same as 81T221 but with trap seal primer tee

❏ 81T221-6

Same as 81T221, but Not Field Adjustable

❏ 81T221-48

Same as 81T221, but factory set at 60 PSI to 4.8 litre

(1.27 US gal.), Not Field Adjustable

Approvals:

• CSA certified

• Complies to ASSE 1037

• ADA compliant and meets

Handicapped Accessibility

Standard ASME A117.1 of less

than 5 lbs. operating force.

• IAPMO Listed

(Contact Delta Representative for State

and/or Local Approvals.)

81T201

54mm

(2.13”) MIN.

Note: For high and low pressure applications, please see page

FEA-81T High Water Pressure note for more details.

Verify flow requirements with bowl manufacturer.

-1 OPTION TRAP SEAL PRIMER TEE

DETERGENT/DISINFECTANT

3/8" O.D. Copper Tube

(NOT SUPPLIED)

TO TRAP

SEAL

292mm (11.5”) for 81T201

610mm (24”) for 81T221

121mm (4.75”)

TECK

COMMERCIAL