Specification Sheet

ManualsBrandsDelta ManualsCommercial ProductsDelta 3/4" Back Spud Prison Urinal Flush Valve with 0.5GPF Adjustable Flush and Handle Activator from the Commercial Series

Concealed Teck

Flush Valve

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.

Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.

DSP–83T430

Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.

Engineer/Architect Approval

Model Specified:

Approval: Date:

Approvals:

• CSA certified

• Complies to ASSE 1037

• Oscillating Lever Handle ADA compliant and

meets Handicapped Accessibility Standard

ASME A117.1 of less than 5 lbs. operating

force.

• IAPMO Listed

(Contact Delta Representative for State and/or

Local Approvals.)

Note: Measurements may vary ± 6mm (0.25'')

Specification: (example)

(FOR WALL HUNG, BACK INLET URINAL FIXTURE)

• Quiet action, TECK

concealed diaphragm flush valve

• Chloramine resistant diaphragm

• Forged brass diaphragm retainer

• Renewable seat

• External water conserving flush volume adjustment,

factory set at 60 PSI to 1.9 litre (0.50 US gal.)

• Metal “non hold open” handle actuator

• Vandal resistant handle control can easily be located and

installed anywhere within 6m (20') of flush valve

• Standard flush valve will install on all walls zero to 343mm

(13-1/2'') thick

• 1'' FIP/copper sweat inlet adaptor wheel handle angle

check stop

• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'')

inlet/valve outlet centers

• Vacuum breaker

FOR 3/4" WALL HUNG, BACK INLET

URINAL FIXTURE: (with 3/4" copper sweat adaptor)

❏ 83T430

with 16mm (5/8'') dia. push button

❏ 83T431

with oscillating handle

OPTIONS: (Add dash number to end

product required above.)

-1 Trap seal primer tee

-38 Factory set at 60 PSI to 3.8 litre (1.0 US gal),

Not Field Adjustable

-19 Factory set at 60 PSI to 1.9 litre (0.5 US gal),

Not Field Adjustable

-05 Factory set at 60 PSI to 0.5 litre (0.13 US gal),

Not Field Adjustable

Note: For high and low pressure applications,

please see page FEA-81T High Water

Pressure note for more details.

Verify flow requirements with bowl

manufacturer.

83T431

-1 OPTION TRAP SEAL PRIMER TEE

DETERGENT/DISINFECTANT

3/8" O.D. Copper Tube

(NOT SUPPLIED)

TO TRAP

SEAL

0-343mm (0-13.5")

292mm

(11.5")

102mm

(4")

121mm (4.75")

318mm (12.5")

TECK

COMMERCIAL