Installation Guide

ManualsBrandsDelta ManualsCommercial ProductsDelta Push Button Hardwire Metering Electronic Shower System with 8" Control Box and Personal Hand Shower from the Commercial Series

210317 Rev. A

86__T1 __ __

Write purchase model number here for future reference

PLEASE LEAVE this M&I Sheet with the owner, maintenance plumber, etc. as

items relating to ongoing maintenance suggestions and procedures are included.

210317 210317 210317 210317 210317

NOTE: For optimum performance of this product, we recommend

a system pressure between 20 and 80 PSI static. This product

will operate up to a maximum of 125 PSI static per ASME and CSA

requirements. However, we do not recommend pressure above

80 PSI. Thermal expansion or leaking pressure reducing valves

may require use of expansion tanks or relief valves to ensure your

system never exceeds its maximum intended pressure setting.

series

ELECTRONIC PUSH

BUTTON SHOWER

52672-15-BG

1.5 GPM (5.7 L/min)

Showerhead

060710A

Shower Arm

& Flange

50560

Wall Supply

Elbow

U494R-WH70-PK

70” White Vinyl Hose

061011A

1.5 GPM (5.7 L/min)

Showerhead

NOTE: Not for use as

an anti-ligature device

24VAC

6.4 VDC

TRANSFORMERS

060704A

Transformer 110 to 24 VAC 20VA

up to 5 Electronic Valves

060771A

Transformer 110 to 24 VAC 40VA

up to 10 Electronic Valves

060772A

Transformer 110 to 24 VAC 100VA

up to 25 Electronic Valves

060073A

No.10 x 32 x 2”

flat head SS

screws & security

spanner bit pkg

for 10” & 12” covers

(4 pcs)

060683A

24VAC to 6VDC

Converter

060679A

Over-ride button

assembly

060680A

Solenoid Extension Wire

060072A

No.6 - 32 x 2” flat

head SS screws &

security spanner

bit pkg for 124mm

(4-7/8”) cover (4 pcs)

RP30532

Battery Holder

060983A

Driver Board

060671A

Solenoid

060984A

Button Extension Wire

SEE PAGES 3 & 4 FOR

CONTROL BOX PARTS

U6300

ADA Adjustable Slide

59462-WHB15-BG

1.5 GPM (5.7 L/min)

Handshower

www .specselect.com

063196A

1.5 GPM (5.7 L/min)

Showerhead

NOTE: Not for use as

an anti-ligature device

Summary of content (8 pages)

PAGE 1
86__T1 __ __ series Write purchase model number here for future reference 060710A Shower Arm & Flange 52672-15-BG 1.5 GPM (5.7 L/min) Showerhead 061011A 1.5 GPM (5.7 L/min) Showerhead NOTE: Not for use as an anti-ligature device 210317 063196A 1.5 GPM (5.7 L/min) Showerhead NOTE: Not for use as an anti-ligature device 210317 59462-WHB15-BG 1.5 GPM (5.7 L/min) Handshower 060073A 060072A 210317 No.
PAGE 2
Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATION INSTRUCTIONS Fig. 2 STEP 1 - ROUGH IN ● Remove suitable knockout(s) in box(es) and insert cable bushing(s). See Fig.1. NOTE: Wires connecting between boxes and from the transformer must be protected from abrasion and being pulled at connections. They also may have to be finished through at a later stage of construction.
PAGE 3
INSTALLATION INSTRUCTIONS Fig. 3 Typical Installations ▲ Top of Box ▼ 2,007mm (79”) Recommended Mounting Height ▲ 860T166 860T167 860T163 860T168 1,320mm (52”) Recommended Mounting Height to top of Box Finished Floor ▼ ▼ Control Box #6 Fig. 4 6mm (1/4”) min. 35mm (1-3/8”) max. 55mm (2-5/32”) Control Box #3 Fig. 5 Finished Wall 203mm (8”) V.R. Screws (4) 114mm (4-1/2”) 102mm (4”) Outlet 3/8” M.I.P.
PAGE 4
INSTALLATION INSTRUCTIONS Control Box #7 Fig. 6 Control Box #8 Fig. 7A 254mm (10”) With showerhead #7 74mm (2.9”) 127mm (5”) 060983A 860T Driver Board Outlet 3/8” M.I.P. Inlets 1/2” Sweat 74mm (2.9”) 060983A 860T Driver Board Outlet - 1/2” Sweat 060671A Slow Closing Solenoid Valve 060671A Slow Closing Solenoid Valve Pressure Balancing Valve 257mm (10-1/8”) Hot Water Inlet Bracket and battery holder not required for hardwire models 257mm (10.
PAGE 5
INSTALLATION INSTRUCTIONS STEP 4 - CONNECT DRIVER BOARD, SOLENOID, POWER SUPPLY AND OVERRIDE BUTTON ● Remove valve spacer and replace with solenoid valve (Fig. 9). Note flow direction marked on the valve body and install in the correct orientation (Fig. 8). Fig. 8 Inlet 1/2” M.I.P/ 1/2” copper sweat Outlet 3/8” F.I.P. ● Attach the black and red solenoid wires on the driver board to the solenoid. Red wire attaches to the terminal marked “+”, Black wire to “-”.
PAGE 6
OPERATION ● Shower flows when stainless steel button is activated. ● Shower flow stops upon reactivation of the button, or when the maximum continuous run time expires. Default continuous run time is 3 minutes. Refer to Driver Board Set-Up section for information on how to adjust the maximum continuous run time. ● When the run time expires and the shower turns off, the user may press the override button again to obtain an additional 2 minutes of run time.
PAGE 7
DRIVER BOARD SET-UP ● Press the yellow up and down buttons (Fig. 12) at any time to increment or decrement the maximum run time of the shower. The maximum run time is adjustable from 1 minute to 10 minutes - in 30 second increments. ● Use the display (Fig. 12) to verify that the maximum run time you want has been set. ● A “.5” at the end of a number signifies an additional 30 seconds. Example : 6.5 = 6 minutes and 30 seconds ● There are also 0.1, 0.2, 0.5 and 0.7 settings which are lower than 1 minute.
PAGE 8
Delta Commercial Faucet Limited Warranty All parts of the Delta® HDF® and TECK® faucets are warranted to the original consumer purchaser to be free from defects in material, finish and workmanship for a period of five (5) years unless otherwise specifically stated in the catalogue and price book. This warranty is made to the original consumer purchaser and shall be effective from date of purchase as shown on purchaser’s receipt.