Specification Sheet

Metering Faucets
Single hole mount lever handle metering faucet with
with 0.35 gpm (1.32 L/min)
Model No: 87T905
SPECIFICATION:
•
Total flow NOT to exceed .25 gallons per handle activation
•
HEAVY-DUTY CAST BRASS
•
Single hole mount faucet
•
Polished chrome plated finish
•
Vandal-resistant ADA lever handle
•
Delta® metering slow close cartridge
•
Two body mounted stainless steel Anti-rotation locking pins
•
Vandal-resistant non-aerating spray
COMPLIES WITH:
•
CSA certified.
•
Complies to ASME Standard A112.18.1/CSA B125.1 for faucets
•
Verified compliant with 0.25% weighted average Pb content regulations
•
Lever Handle meets ADA compliance to ICC/ANSI A117.1 / ADA
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
NOTES:
Verified compliant with 0.25% weighted average Pb content regulations
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced February 15, 2017.
- 1.0.15265
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]