Installation Guide

ManualsBrandsDelta ManualsKitchenLeland Single-Handle Pull-Down Sprayer Kitchen Faucet with Touch2O and MagnaTite Docking in Venetian Bronze

TOUCH

PULL-OUT KITCHEN & BAR/ PREP FAUCET

LLAVE DE AGUA/GRIFO EXTRAÍBLE TOUCH

PARA

COCINAS Y FREGADEROS PARA PREPARATIVOS/

BARES

ROBINET TOUCH

À BEC RÉTRACTABLE POUR

ÉVIER D’ÎLOT, DE BAR ET DE CUISINE

Models/Modelos/Modèles

ADDISON™, ASHTON

ESQUE™

& LELAND

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

10/06/2017 Rev. E

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave

Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your

Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

Pour installer votre robinet

Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

92834

9178T-DSTp 9181T-DSTp 9192T-DSTp

9678T-DSTp 9992T-DSTp9981T-DSTp

To access additional technical documents & product info, visit www.deltafaucet.com/p/Your-Model-Number-Here

(Example: www.deltafaucet.com/p/9159T-DST)

Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.deltafaucet.

com/p/Your-Model-Number-Here (ejemplo: www.deltafaucet.com/p/9159T-DST)

Pour avoir accès à des documents techniques supplémentaires et à de l’information sur le produit, visitez www.delta-

faucet.com/p/Votre-numéro-de-modèle-ci (exemple : www.deltafaucet.com/p/9159T-DST)

www.deltafaucet.com

1-800-345-DELTA (3358)

customerservice@deltafaucet.com

3/32"

19922T-DSTp

Summary of content (16 pages)

PAGE 1
92834 Models/Modelos/Modèles ADDISON™, ASHTON®, ESQUE™ & LELAND® TOUCH2O® PULL-OUT KITCHEN & BAR/ PREP FAUCET LLAVE DE AGUA/GRIFO EXTRAÍBLE TOUCH2O® PARA COCINAS Y FREGADEROS PARA PREPARATIVOS/ BARES ROBINET TOUCH2O® À BEC RÉTRACTABLE POUR ÉVIER D’ÎLOT, DE BAR ET DE CUISINE 9178T-DSTp Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
LELAND® Models/Modelos/Modèles 9178T-DST & 9678T-DST RP80977 Wand Retainer & Replacement Kit Soporte para el mango y piezas de repuesto Trousse de rechange et pièce de retenue de douchette 9678T RP51480p Sprayer & Hose Assembly (Includes aerator) Rociador y Ensamble de la Manguera (Incluye el aireador) Douchette et Tuyau Souple (Inclut aérateur) RP50585p Button & Set Screw Botón y Tornillo de Presión Bouton et Vis de calage RP40650 Set Screw Tornillo de Presión Vis de calage RP63195p Lever Handle, Butto
PAGE 4
ADDISONTM Models/Modelos/Modèles 9192T-DST & 9992T-DST RP47271p Button & Set Screw Botón y Tornillo de Presión Bouton et Vis de calage Bar Faucet Grifo para Bares Pour évier de bar RP63193p Lever Handle, Button & Set Screw Manijas de Palanca, Botón y Tornillo Manette, Bouton et Vis de calage RP53879p Button Botón Bouton RP80977 Wand Retainer & Replacement Kit Soporte para el mango y piezas de repuesto Trousse de rechange et pièce de retenue de douchette RP60976p Sprayer & Hose Assembly *RP90838p (Incl
PAGE 5
ESQUETM Models/Modelos/Modèles 9181T-DST & 9981T-DST RP80977 Wand Retainer & Replacement Kit Soporte para el mango y piezas de repuesto Trousse de rechange et pièce de retenue de douchette RP83820p Lever Handle, Button & Set Screw Manijas de Palanca, Botón y Tornillo Manette, Bouton et Vis de calage 9981T 9181T RP83819p Sprayer Assembly (Includes aerator Rociador Ensamble (Incluye el aireador) Douchette Souple (Inclut aérateur) *RP90840p Sprayer Assembly (ShieldSpray™) Rociador Ensamble (ShieldSpray™)
PAGE 6
ASHTON® Models/Modelos/Modèles 19922T-DST RP53879p Button Botón Bouton RP63194p Lever Handle, Button & Set Screw Manijas de Palanca, Botón y Tornillo Manette, Bouton et Vis de calage RP40650 Set Screw Tornillo de Presión Vis de calage RP80977 Wand Retainer & Replacement Kit Soporte para el mango y piezas de repuesto Trousse de rechange et pièce de retenue de douchette RP51502p Cap Bonete Chapeau RP63220 Contact Spring Resorte de Contacto Ressort de contact RP60977p *RP93635p Sprayer & Hose Assembly (Sh
PAGE 7
RP93410 Filter Filtro Filtre EP92546 Solenoid Assembly Ensamble de Solenoide Électrovanne For PC, CZ, & AR finishes, order EP92546 For RB & SP finishes, order EP92546XX Para acabados PC, CZ, y AR, ordene EP92546 Para acabados RB & SP, ordene EP92546XX RP13938 O-Ring (2) Anillo “O” (2) Joint torique (2) Pour les finis PC, CZ et AR, commandez EP92546 Pour les finis RB & SP, commandez EP92546XX EP73954 9 Volt Power Supply (Accessory Order Only) Fuente de alimentación de 9 voltios (Orden de accesorios solam
PAGE 8
1 B. A. C. OPTIONAL / OPCIONAL / FACULTATIVE 1 1 8 6 2 2 3 7 5 4 5 7 Insert D 3 8 6 Optional Escutcheon Installation Mount Faucet to Deck A. Insert faucet tubes and shank through mounting hole in sink; and, place faucet (1) over mounting hole. Ensure that the light at the base is facing forward. Ensure tab on base (6) is in sink hole. B. Secure faucet to sink with mounting bracket (2) and nut (3),ensure parts are oriented as shown in Insert D. Mount underneath sink, hand tighten.
PAGE 9
2 A. B. C. OR 2 1 O 2 2 OU 3 3 4 1 1 4 Water Line Connections A. Install included check valves as shown B. Ensure all fittings and end connections are free of debris. Faucet fittings (1) are 3/8" compression, with ends colored red for hot and blue for cold. Loop tubing (2) if it is too long. Note: Recommended tubing minimum bend diameter is 8". Secure metal nut (3) on faucet tube to check valve connection (4) and hand tighten, then tighten one additional turn with wrench. DO NOT OVERTIGHTEN.
PAGE 10
Incorrect Installation Instalación Incorrecta Installation Incorrecte Correct method Método Correcto Bonne méthode 2 3 1 4 Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. Slide nut (2) and plastic sleeve (3) onto cut tube. Ensure sleeve is oriented as shown. 3. Insert tube into outlet fitting (4).
PAGE 11
4 3 15 17 13 16 1 14 Flush Supply Lines Because your sprayer has been factory assembled to the hose, we do not recommend removing to flush the lines. Instead, if possible, we recommend placing a bucket below the outlet fitting and one of two options. Solenoid Installation Slide tube (15) into the top solenoid nipple (16). Rotate clip (17) over tube and nipple to secure connection. Pull down moderately to ensure the connection has been made. Slide hose weight over end of hose. 1.
PAGE 12
5 6 21 18 19 20 18 20 19 22 Push hose end (19) onto solenoid assembly outlet (18). Attach clip (20) over hoses as shown. Pull down moderately to ensure connection has been made. Push clip (21) onto shank as shown to ensure clip is tight onto shank. Ensure LED wire (22) is properly pushed in to solenoid. Make sure wire extends away from solenoid. For proper functionality DO NOT tie, twist or bunch the wires. Empuje el extremo de la manguera (19) en la salida de las piezas del solenoide (18).
PAGE 13
7 8 “AA” Batteries (Last up to 2 years) Pilas “AA” (Duran hasta 2 años) Piles « AA » (Durée utile de 2 ans) 1 “C” Batteries (Last up to 5 years) Pilas “C” (Duran hasta 5 años) Piles « C » (durée utile de 5 ans) 2 9 Important: Place batteries in holder, secure cap and lay on cabinet floor as shown in Step 9. Check for Leaks 1 Check all connections at arrows for leaks. Refer back to the appropriate installation instructions and retighten if necessary.
PAGE 14
4 9 5 6 7 3 8 1 2 Maintenance If faucet exhibits very low flow A. Remove and clean aerator (1) (Note: some models require wrench (2) to remove aerator.), or B. Unscrew hose from spray head and clean debris from screen - the screen is located just inside the spray (3). Note: Not all spray heads have a screen. C. Remove and clean blue filter (9) inside solenoid valve. Note: Use needle nose pliers or tweezers to remove and replace filter (9). IMPORTANT: Reinstall screen to the spray head.
PAGE 15
LED Guide If LED is: Solid Blue - Solenoid valve is open, water temperature is less than 80°F (27°C). Solid Magenta - Solenoid valve is open, water temperature is between 80°F (27°C) and 110°F (43°C). Solid Red - Solenoid valve is open, water temperature is greater than 110°F (43°C). 3 red flashes before solenoid opens or closes - replace batteries. Guía del LED Si el LED es: Azul sólido - La válvula solenoide está abierta, la temperatura del agua es menos de 27° C (27° C).
PAGE 16
Solenoid Troubleshooting Note: Normal operation of the faucet will turn off water flow if faucet is not touched for 4 minutes. 1. If your spout indicates three red flashes, replace the batteries. If the spout still indicates three red flashes, please replace the solenoid assembly**. (see manual bypass option below*) 2. If neither water or light indication are working properly, a. Check that all six batteries or inserted in the proper orientation. b. Replace your batteries c.