Installation Sheet

ManualsBrandsDelta ManualsBar FaucetsTrinsic Single-Handle Pull-Down Sprayer Bar Faucet in Matte Black Featuring MagnaTite Docking

PULL-OUT KITCHEN & BAR/ PREP FAUCET

LLAVE DE AGUA/GRIFO EXTRAÍBLE PARA COCINAS Y

FREGADEROS PARA PREPARATIVOS/BARES

ROBINET À BEC RÉTRACTABLE POUR ÉVIER D’ÎLOT,

DE BAR ET DE CUISINE

Models/Modelos/Modèles

CASSIDY™, ESSA

MATEO

TRINSIC

& TRASK™

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

11/06/2017 Rev. C

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave

Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your

Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

Pour installer votre robinet

Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

92728

9113-DSTp

9913-DSTp

9159-DSTp

9959-DSTp

9183-DSTp

9983-DSTp

9197-DSTp

9997-DSTp

19933-DSTp

To access additonal technical documents & product info, visit www.deltafaucet.com/p/Your-Model-Number-Here

(example: www.deltafaucet.com/p/9159T-DST)

Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.deltafaucet.

com/p/Your-Model-Number-Here (ejemplo: www.deltafaucet.com/p/9159T-DST)

Pour avoir accès à des documents techniques supplémentaires et à de l’information sur le produit, visitez www.delta-

faucet.com/p/Votre-numéro-de-modèle-ci (exemple : www.deltafaucet.com/p/9159T-DST)

www.deltafaucet.com

1-800-345-DELTA (3358)

customerservice@deltafaucet.com

3/32"

Summary of content (12 pages)

PAGE 1
92728 PULL-OUT KITCHEN & BAR/ PREP FAUCET LLAVE DE AGUA/GRIFO EXTRAÍBLE PARA COCINAS Y FREGADEROS PARA PREPARATIVOS/BARES Models/Modelos/Modèles CASSIDY™, ESSA®, MATEO® , TRINSIC® & TRASK™ ROBINET À BEC RÉTRACTABLE POUR ÉVIER D’ÎLOT, DE BAR ET DE CUISINE 9113-DSTp 9913-DSTp 9159-DSTp 9959-DSTp 9183-DSTp 9983-DSTp 9197-DSTp 9997-DSTp Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
92728 Rev.
PAGE 4
92728 Rev.
PAGE 5
1 B. A. C. 2 1 3 4 5 Insert Mount Faucet to Deck A. Insert faucet tubes and shank through mounting hole in sink; and, place faucet (1) over mounting hole. C. Adjust position of faucet above sink then tighten locking screws (5) using a Phillips screwdriver. HINT: Turn the spout tube opposite the handle to balance the assembly when mounting. B. Secure faucet to sink with mounting bracket (2) and nut (3),ensure parts are oriented as shown in Insert. Mount underneath sink, hand tighten.
PAGE 6
OPTIONAL / OPCIONAL / FACULTATIVE OPTIONAL / OPCIONAL / FACULTATIVE A. B. 1 1 6 6 2 2 7 7 5 5 3 8 9 3 8 Optional Escutcheon Installation Optional Escutcheon Installation Models: 9113 and 19933 only. For optional installations using the 10 1/2” escutcheon, order RP92233 (specify finish) not supplied. Place the 10 1/2" escutcheon (6) and gasket (7) under faucet (1), hand tighten using escutcheon nuts (8). Mount as shown above using the mounting bracket (2).
PAGE 7
2 A. B. 9 OR 9 10 O 11 OU 10 11 10 12 11 Water Line Connections A. Ensure all fittings and end connections are free of debris. Faucet fittings (12) are 3/8" compression, with ends colored red for hot and blue for cold. Loop tubing (9) if it is too long. Note: Recommended tubing minimum bend diameter is 8". Secure metal nut (10) on faucet tube to supply valve connection (11) and hand tighten, then tighten one additional turn with wrench. DO NOT OVERTIGHTEN. Repeat for other tube.
PAGE 8
Correct method Método Correcto Bonne méthode Incorrect Installation Instalación Incorrecta Installation Incorrecte 2 3 1 4 Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. Slide nut (2) and plastic sleeve (3) onto cut tube. Ensure sleeve is oriented as shown. 3. Insert tube into outlet fitting (4).
PAGE 9
4 3 13 2 3 1 1 4 3 1 3 4 4 1 14 Flush Supply Lines Because your sprayer has been factory assembled to the hose, we do not recommend removing to flush the lines. Instead, if possible, we recommend placing a bucket below the outlet fitting and one of two options. Clip Installation Insert hose end (1) through hose weight assembly (2). Push hose end (1) onto faucet outlet (3). Attach clip (4) over hose and outlet as shown. Pull down moderately to ensure connection has been made. 1.
PAGE 10
5 1 3 2 1 4 7 6 5 Maintenance 2 If faucet exhibits very low flow – Unscrew hose from spray head and clean debris from screen (1) (the screen is located just inside the spray) . IMPORTANT: Reinstall screen to the spray head (failure to reinstall the screen could damage internal parts). If faucet leaks from under handle or from spout outlet – Insert a small screwdriver into slot (2) in button (3) and remove. Loosen set screw (4) inside of handle. Remove handle.
PAGE 11
92728 Rev.
PAGE 12
92728 Rev.