Installation Guide

ManualsBrandsDelta ManualsKitchen ApplianceMateo Single-Handle Prep Pull-Down Sprayer Kitchen Faucet with Touch2O in Chrome

TOUCH

PULL-OUT KITCHEN & BAR/ PREP FAUCET

LLAVE DE AGUA/GRIFO EXTRAÍBLE TOUCH

PARA

COCINAS Y FREGADEROS PARA PREPARATIVOS/

BARES

ROBINET TOUCH

À BEC RÉTRACTABLE POUR

ÉVIER D’ÎLOT, DE BAR ET DE CUISINE

Models/Modelos/Modèles

CASSIDY™, DOMINIC

, ESSA

MATEO

TRINSIC

& TRASK™

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

01/05/2018 Rev. G

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave

Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your

Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

Pour installer votre robinet

Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

92519

9113T-DSTp

9913T-DSTp

9159T-DSTp

9959T-DSTp

9183T-DSTp

9983T-DSTp

9197T-DSTp

9997T-DSTp

19940T-DSTp19933T-DSTp

To access additonal technical documents & product info, visit www.deltafaucet.com/p/Your-Model-Number-Here

(example: www.deltafaucet.com/p/9159T-DST)

Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.deltafaucet.

com/p/Your-Model-Number-Here (ejemplo: www.deltafaucet.com/p/9159T-DST)

Pour avoir accès à des documents techniques supplémentaires et à de l’information sur le produit, visitez www.delta-

faucet.com/p/Votre-numéro-de-modèle-ci (exemple : www.deltafaucet.com/p/9159T-DST)

www.deltafaucet.com

1-800-345-DELTA (3358)

customerservice@deltafaucet.com

3/32"

Summary of content (16 pages)

PAGE 1
92519 Models/Modelos/Modèles TOUCH2O® PULL-OUT KITCHEN & BAR/ PREP FAUCET LLAVE DE AGUA/GRIFO EXTRAÍBLE TOUCH2O® PARA COCINAS Y FREGADEROS PARA PREPARATIVOS/ BARES ROBINET TOUCH2O® À BEC RÉTRACTABLE POUR ÉVIER D’ÎLOT, DE BAR ET DE CUISINE CASSIDY™, DOMINIC®, ESSA®, MATEO® , TRINSIC® & TRASK™ 9113T-DSTp 9913T-DSTp 9159T-DSTp 9959T-DSTp Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
92519 Rev.
PAGE 4
92519 Rev.
PAGE 5
® DOMINIC Models/Modelos/Modèles 19940T-DST RP80977 Wand Retainer & Replacement Kit Soporte para el mango y piezas de repuesto Trousse de Rechange et pièce de Retenue de Douchette RP60911 Clip Presilla Agrafe RP60923 Retainer Funda Douille RP80227p Kitchen Spout Assembly with Magnet Ensamble del Tubo de Salida Bec RP74836 Cartridge Assembly Ensamble del la Válvula Soupape RP80619 Bonnet Nut Tuerca Écrou RP79533p *RP93632p Sprayer Assembly (ShieldSpray™) Ensamble de rociador (ShieldSpray™) Pulvéri
PAGE 6
RP93410 Filter Filtro Filtre EP92546 Solenoid Assembly Ensamble de Solenoide Électrovanne For PC, SS, AR & KS finishes, order EP92546 For PL, MW, RB & SP finishes, order EP92546XX Para acabados PC, SS, AR y KS, ordene EP92546 Para acabados PL, MW, RB y SP, ordene EP92546XX RP13938 O-Ring (2) Anillo “O” (2) Joint torique (2) Pour les finis PC, SS, AR et KS, commandez EP92546 Pour les finis PL, MW, RB et SP, commandez EP92546XX EP73954 9 Volt Power Supply (Accessory Order Only) Fuente de alimentación de 9
PAGE 7
1 B. A. C. 8 1 2 3 4 7 5 Insert D 6 Mount Faucet to Deck A. Insert faucet tubes and shank through mounting hole in sink; and, place faucet (1) over mounting hole. Ensure that the light at the base is facing forward. Ensure tab on base (6) is in sink hole. B. Secure faucet to sink with mounting bracket (2) and nut (3),ensure parts are oriented as shown in Insert D. Mount underneath sink, hand tighten. Tighten securely using wrench (4). Ensure isolation feature (7) on bracket is in sink hole.
PAGE 8
OPTIONAL / OPCIONAL / FACULTATIVE OPTIONAL / OPCIONAL / FACULTATIVE A. B. 1 1 6 6 2 2 7 7 5 5 8 8 3 3 9 Optional Escutcheon Installation Optional Escutcheon Installation Models: 9113T, 19933T and 19940T only. For optional installations using the 10 1/2” escutcheon, order RP92233 (specify finish) not supplied. Place the 10 1/2" escutcheon (6) and gasket (7) under faucet (1), hand tighten using escutcheon nuts (8). Mount as shown above using the mounting bracket (2).
PAGE 9
2 A. B. 1 tion cadora Installa ula Che -retour Valve la Válv non Check ión de clapet de Instalaction du 2 Installa 1 to ential is ess ing it plumb stops. ply your on of your sup operati onto . proper emblies rtighten) l inensurevalve ass er stop. not ove esencia agua. nt: To ck wat ten (do ería es tro de Importathese che into cold and tigh (1) (2) su plom suminis de install rt ferrule ck valve page 2. del debidolos topes 1. Inseead on che ions on en miento ruct oras asiado). 2.
PAGE 10
3 A. B. 3 1 2 OR 4 2 1 O 2 OU 3 4 1 2 Water Line Connections A. Ensure all fittings and end connections are free of debris. Faucet fittings (1) are 3/8" compression, with ends colored red for hot and blue for cold. Loop tubing (2) if it is too long. Note: Recommended tubing minimum bend diameter is 8". Secure metal nut (3) on faucet tube to check valve connection (4) and hand tighten, then tighten one additional turn with wrench. DO NOT OVERTIGHTEN. Repeat for other tube.
PAGE 11
Correct method Método Correcto Bonne méthode Incorrect Installation Instalación Incorrecta Installation Incorrecte 2 3 1 4 Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. Slide nut (2) and plastic sleeve (3) onto cut tube. Ensure sleeve is oriented as shown. 3. Insert tube into outlet fitting (4).
PAGE 12
5 4 15 17 16 13 1 14 Flush Supply Lines Because your sprayer has been factory assembled to the hose, we do not recommend removing to flush the lines. Instead, if possible, we recommend placing a bucket below the outlet fitting and one of two options. Solenoid Installation Slide tube (15) into the top solenoid nipple (16). Rotate clip (17) over tube and nipple to secure connection. Pull down moderately to ensure the connection has been made. Slide hose weight over end of hose. 1.
PAGE 13
6 7 21 18 19 20 18 20 19 22 Push hose end (19) onto solenoid assembly outlet (18). Attach clip (20) over hoses as shown. Pull down moderately to ensure connection has been made. Push clip (21) onto shank as shown to ensure clip is tight onto shank. Ensure LED wire (22) is properly pushed in to solenoid. Make sure wire extends away from solenoid. For proper functionality DO NOT tie, twist or bunch the wires. Empuje el extremo de la manguera (19) en la salida de las piezas del solenoide (18).
PAGE 14
8 9 “AA” Batteries (Last up to 2 years) Pilas “AA” (Duran hasta 2 años) Piles « AA » (Durée utile de 2 ans) 1 2 10 “C” Batteries (Last up to 5 years) Pilas “C” (Duran hasta 5 años) Piles « C » (durée utile de 5 ans) Important: Place batteries in holder, secure cap and lay on cabinet floor as shown in Step 10. Check for Leaks Check all connections at arrows for leaks. Refer back to the appropriate installation instructions and retighten if necessary.
PAGE 15
LED Guide 8 If LED is: Solid Blue - Solenoid valve is open, water temperature is less than 80°F (27°C). Solid Magenta - Solenoid valve is open, water temperature is between 80°F (27°C) and 110°F (43°C). Solid Red - Solenoid valve is open, water temperature is greater than 110°F (43°C). 3 3 red flashes before solenoid opens or closes - replace batteries. Guía del LED Si el LED es: Azul sólido - La válvula solenoide está abierta, la temperatura del agua es menos de 27° C (27° C).
PAGE 16
Solenoid Troubleshooting Note: Normal operation of the faucet will turn off water flow if faucet is not touched for 4 minutes. 1. If your spout flashes a red light on then off and then keeps repeating this, replace the batteries. If the spout still flashes a red light, please replace solenoid and electronics kit**. (see manual bypass of electronics section*) 2. If your spout displays the proper light, but no water is coming out of the spout, a. Verify the handle is in the “on” position. b.