Use and Care Manual

13 deltafaucet.com
Before you call.
Below, you’ll find some frequently asked questions and troubleshooting tips.
For more information on any topic—or to find information on a problem you
don’t see here—visit deltafaucet.com/customersupport where you can search
for more detailed instructions. You can also find helpful “How-To” videos on
deltafaucet.com/videogallery and YouTube.com/deltafaucet.
What should I do if my single-handle kitchen or lavatory faucet drips from the spout?
Your Delta
®
faucet is designed for leak-free performance, and all of our faucets
are performance-tested before they leave our manufacturing facilities. If you
experience a drip from the spout, follow the Early Maintenance instructions
on page 3 of this guide. If you continue to experience the problem, follow
these steps:
For Single-Handle Faucets, First:
• Remove the handle to determine what type of valve is inside.
• Look for an orange handle limit stop or a square stem in a yellow-green color.
If you have either of these, you have a DIAMOND
™
Valve. If you don’t have an
orange handle limit stop or a yellow-green, square stem, you most likely have
a ball valve.
For DIAMOND Valve Models:
• Turn water off at the stops.
• Unthread cap.
• Use a wrench to tighten the bonnet nut. Be careful not to overtighten.
• Replace the handle.
• Contact 1-800-345-DELTA (3358) or visit
deltafaucet.com/customersupport for assistance if you
continue to experience issues.
Valve
Cartridge
Bonnet Nut
Cap
Stem
Handle with
Set Screw