Installation Guide

A L L O R A

K I T C H E N C O L L E C T I O N W I T H

E Z A N C H O R

™

M O U N T I N G

Installation is easier than ever with the EZ Anchor

mounting assembly.

• Secure faucet from above, no need to go below deck

• Mounts faucet tightly to deck, no loosening over time

• Installs on up to 2-1/2"-thick decks, like granite or quartz

SINGLE-HANDLE PULL-DOWN

BAR/PREP

999-AR-DST

1 or 3-hole installation

SINGLE-HANDLE PULL-DOWN

989-AR-DST

1 or 3-hole installation

SINGLE-HANDLE PULL-DOWN

989-AR-DST WITH

RP47280AR SOAP DISPENSER

2 or 4-hole installation

Chrome Arctic

™

Stainless

= EZ Anchor

™

Mounting

= Water-Efﬁcient Product

Kitchen Faucets: ﬂow rate of 1.5 gpm or 1.8 gpm

versus Industry Standard ASME A112.18.1/CSA

B125.1 of 2.2 gpm. Meets CALGreen standards.

= DIAMOND

™

Seal Technology

= CA/VT Compliant

Products shown in Arctic

™

Stainless.

DFT11025_EZanchorSellSht.indd 1 11/8/11 4:34 PM

PAGE 1
A L L O R A® K I T C H E N C O L L E C T I O N W I T H E Z A N C H O R™ M O U N T I N G Installation is easier than ever with the EZ Anchor mounting assembly.
PAGE 2
E Z A N C H O R™ I N S TA L L AT I O N Step 1 Insert the EZ Anchor mounting assembly through the hole in the countertop. Step 2 Tighten the screw to adjust the first cleat (black wedge that secures the assembly beneath the deck) until it’s flush with the bottom of the deck. Repeat for the second cleat. Step 3 Place the spout hub through the assembly, aligning the cut-out and handle. Ensure the small tube is in front of the supply lines.