Hardware manual

AH500 Hardware Manual
3.3.2 Profiles
 Profile of the main backplane AHBP08M1-5A
1
1
2 3 4 5 6 7
8
8
9
10
Number Name Description
1 Mounting hole Fixing the backplane
2 Extension port It is connected to an inferior backplane.
3 Mounting hole After a module is installed, it is fixed by a screw.
4 Connector Connecting the backplane and a power supply module
5 Connector Connecting the backplane and a CPU module
6 Connector Connecting the backplane and an input/output module
7 Hole The projection under a module is inserted into this hole.
8 Mounting clip Hanging a backplane on a DIN rail
9 Mounting hole After a mounting clip is installed, it is fixed by screws.
10 Locating hole A mounting clip is pressed into these locating holes.
3-7