Hardware manual

Chapter 2 Programming
Users can drag AH06XA-5A to I/O 2 and drop it. The input device range is D0~D7, and the output
device range is D100~D103. (The default output device range is D8~D11. Please remember to
modify it.)
In addition to specifying the input device range and the output device range, users also have to
specify the version of the firmware for the analog input/output module. Please select the version of
the firmware according to the version of the firmware in the module.
In order to complete the basic setting, users need to set the relation between the signals and the
conversion values for the analog module. Double-click the module to open the
Parameter Setting
window.
2-17