Instruction manual

OPERATING CONTROLS & ADJUSTMENTS

WARNING: FOR OPERATOR SAFETY, MAKE CERTAIN

THE DUST INTAKE PORT IS COVERED WITH THE HOSE

BEFORE OPERATING THE MACHINE. THE ROTATING FAN

INSIDE THE BLOWER HOUSING IS ACCESSIBLE

THROUGH THE DUST INTAKE PORT AND IS HAZARDOUS.

MAKE SURE INTAKE CAP COVERS THE INTAKE PORT

WHEN HOSE IS REMOVED. ALWAYS WEAR PROPER

APPAREL. DO NOT WEAR JEWELRY, AND KEEP FINGERS

AND ALL FOREIGN OBJECTS OUT OF THE DUST INTAKE

PORT. ALWAYS FOLLOW THE SAFETY RULES OF THIS

MANUAL.

STARTING AND STOPPING

DUST COLLECTOR

The ON/OFF switch (A) Fig. 24, is located on the side of

the motor. To turn the machine “ON” move the switch up

to the “ON” position. To turn the machine “OFF” move

the switch down to the “OFF” position..

LOCKING SWITCH IN

THE “OFF” POSITION

IMPORTANT: When the machine is not in use, the

switch should be locked in the “OFF” position to prevent

unauthorized use. This can be done by grasping the

switch toggle (B) Fig. 25, and pulling it out of the switch

as shown. With the switch toggle (B) removed, the

switch will not operate. However, should the switch

toggle be removed while the machine is running, it can

be turned “OFF” once, but cannot be restarted without

inserting the switch toggle (B).

Fig. 24

Fig. 25