Dimensions Guide
Submitted Model No.:
Specific Features:
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice
or obligation. Dimensions are for reference only. See current full-line price book or www.deltafaucet.com for finish options and product
availability.
DSP-L-B2515LF Rev. F
B2515LF-▲-PPU
B2515LF-▲-PPU-ECO
▲ Designate proper finish suffix
3 11/32"
(85 mm)
2 17/32"
(64 mm)
1 1/4"
(32 mm)
Max. Deck
Thickness
4 5/16"
(110 mm)
Min. 2 1/2" (64 mm)
Clearance to Back Splash
Recommended
1/2"-14
NPSM
2 1/8"
(54 mm)
Dia.
1 5/8" (42 mm)
to
2 3/8" (61 mm)
3 1/2"
(89 mm)
4 7/8"
(124 mm)
1 1/4"
(32 mm)
Dia.
8 23/32"
(222 mm)
4"
(102 mm)
3x 1 1/8" to
1 1/2" (29 mm
to 38 mm) hole
size
3 5/8"
(92 mm)
1 7/8"
(48 mm)
2 1/4"
(57 mm)
6 3/32"
(155 mm)
STANDARD SPECIFICATIONS
• Max. flow rate 1.5 gpm @ 60 psi, 5.7 L/min @ 414 kPa
• Max. flow rate (ECO models only) 1.2 gpm @ 60 psi,
4.5 L/min @ 414 kPa
• Three hole mount
• Solid brass end valves and spout body
• Hot and cold stems are interchangeable
• Control mechanism is a rotating cylinder type with
stainless steel plate and 90° rotation, with replaceable
non-metallic seats
• Models have drain with pop-up type fitting with plated
flange and stopper
• RP76691 thick deck mounting kit adds 1 1/4" (25 mm)
to maximum deck thickness
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2020 Delta Faucet Company
WARRANTY
•
Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
•
Electronic Parts and Batteries (if applicable) - 5
years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase. No
warranty is provided on batteries.
BATHROOM FAUCET
■ Foundations
®
Collection
■ Two Handle Centerset Deck Mount
COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1
•
ASME A112.18.6
Indicates compliance to
ICC/ANSI A117.1 - Valve control only
•
EPA WaterSense
®
•
Verified compliant with 0.25% weighted average Pb
content regulations.