Dimensions Guide
B28910LF
▲
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for nish options and product availability.
DSP-S-B28910LF Rev. E
STANDARD SPECIFICATIONS:
WARRANTY
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
• Max. low rate 1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
• Two or three hole mount
• Spout rotates 360°
• All operating parts shall be replaceable from the top
• Hot and cold stems are interchangeable
• 1/2"-14 NPSM threaded male inlet shanks
• Control mechanism is a rotating cylinder type with
stainless steel plate and 90° rotating, with replaceable
non-metallic seats
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and
inishes; or,
for commercial users, for 5 years from the date
of purchase.
• 5 year limited warranty on electronic parts (other
than batteries); or for commercial users, for 1 year
from the date of purchase. No warranty is provided
on batteries.
1"
(25 mm)
Max. Deck
Thickness
4"
(102 mm)
Centers
6 1/8"
(156 mm)
1/2"-14 NPSM
3 3/4"
(95 mm)
11"
(279 mm)
2 X 1 1/8"~1 1/2"
(29~38 mm)
Hole Size
5" (157mm)
360˚ Swing Spout
Min.2 1/2" (64 mm)
Clearance to Back
Splash Recommended
7 3/8"
(187 mm)
BAR & PREP
SINK FAUCETS
2 1/4"
(57 mm)
2 1/8" (54 mm)
■
Two Handle Deck Mount
• Veri ied compliant with 0.25% weighted average
Pb content regulations.
Submitted Model No.:
Specific Features:
Indicates compliance to
ICC / ANSI A117.1
8 1/2"
(216 mm)
▲ Designate Proper Finish Suffix
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2018 Delta Faucet Company