Installation Guide

ManualsBrandsDelta ManualsBathFoundations 4 in. Centerset Single-Handle Pro-Pak Bathroom Faucet in Chrome (2-Pack)

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

Model/Modelo/Modèle

B510LF/B512LF/B501LF

B5110LF-PPU/B510LF-PPU

Series/Series/Seria

Para instalación fácil de su llave Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

• Comprar las conexiones correctas para el

suministro de agua.

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, ca

re, and maintenance

information.

• To purchase the correct water supply hook-up.

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

SILICONE

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

• Acheter le bon nécessaire de raccordement.

65590 65590 65590 65590 65590 65590

2/10/11 Rev. F

SINGLE HANDLE LAVATORY FAUCET

LLAVE DE LAVAMANOS DE UNA MANIJAS

ROBINET À UNE MANETTE POUR LAVABO

ASME A112.18.1 / CSA B125.1

ASME A112.18.2 / CSA B125.2

SILICONE

1/8"

(3.2 mm)

Summary of content (8 pages)

PAGE 1
ASME A112.18.1 / CSA B125.1 ASME A112.18.2 / CSA B125.2 65590 65590 65590 65590 Model/Modelo/Modèle B510LF/B512LF/B501LF B5110LF-PPU/B510LF-PPU Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product.Although its finish is extremely durable, it can be damaged by harsh abrasives or polish.To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. ® ® WARNING: SCRUBBING BUBBLES BATHROOM CLEANER and LYSOL BASIN TUB AND TILE CLEANER must not be used on the clear knob handles and levers. Use of these cleaners can result in cracked or severely damaged handles.
PAGE 3
Specify Finish Especifíque el Acabado Précisez le Fini RP42847▲ Lift Rod Barra de Alzar Tige de Manoeuvre RP41661 Knob Handle w/Button, Screw, Connector and Set Screw Perilla con Botón, Tornillo, Conectador y Tornillo de Ajuste Manette Sphérique avec Bouton, Vis et Vis de Calage RP42986▲ Handle w/Set Screw and Button Perilla con Tornillo de Ajuste y Botón Manette avec Vis et Bouton 1 Adjusting Ring Anillo de Ajuste Anneau de Réglage 3 Ball Assembly Ensamble de la Bola Rotule 2 Seats & Springs Asien
PAGE 4
1 2 1 2 1 2 1 2 1. SHUT OFF WATER SUPPLIES. 2. Slide washers (1) in place under sink and between nuts, with slotted 1. CIERRE LOS SUMINISTROS DE AGUA. 2. Deslice la arandela (1) hasta su sitio debajo del lavamanos y entre Place gasket (1) on bottom of new faucet. Assemble nuts (2) to studs. Place faucet through mounting holes in sink. Option: If sink is uneven, use silicone under the gasket. openings around tubes. Secure faucet to sink by tightening nuts (2) with a wrench.
PAGE 5
B. 1 1 ON E A. SI LIC 3 7 2 3 5 4 4 3 6 8 2 C. D. 4 3 4 5 5 1 2 3 2 1 6 Metal Pop-Up installation A. Remove stopper (1) and flange (2). Screw nut (3) all the way down. B. Apply silicone to underside of flange (1). Insert body (2) into sink. Screw C. Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as D. Attach horizontal rod (1) to strap (2) using clip (3). Insert lift rod (4) into Push washer (4) and gasket (5) down.
PAGE 6
4 A. B. 1 1 2 2 4 3 3 C. D. 3 4 1 6 5 1 7 3 2 1 2 4 Plastic Pop-Up installation A. Remove stopper (1) and flange (2). Screw nut (3) all the way down. B. Apply silicone to underside of flange (1). Insert body (2) into sink. C. Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as D. Insert lift rod (1) through faucet and into strap (2). Tighten screw (3). Push black gasket (4) down. Screw flange onto body. Pivot hole (3) must face back of sink.
PAGE 7
5 6 2 1 1 2 A 3 B 5. CONNECT TO WATER SUPPLIES. (HOOK-UPS NOT PROVIDED). 6. FLUSH SYSTEM/CHECK FOR LEAKS. Determine which type of connection you will be making. (1) Ball nose risers (3/8" O.D. copper tubing) with coupling nuts (A) or (2) 1/2" I.P.S faucet connectors. Remove aerator (1) and turn faucet handle (2) all the way on. Turn on hot and cold water supplies (3) and flush water lines for one minute. Important: When making connections be sure to use two wrenches when tightening (B).
PAGE 8
1 3 2 2 4 4 8 65590 Rev.