Use And Care Manual

ADHESIVE
Use a construction adhesive or advanced sealant/adhesive that is
safe for plastics.
SEALANT
We recommend an advanced waterproof sealant for your Delta®
bathing product. Caulks/sealants that state water clean up are not
recommended.
Notice: acrylic latex along with some silicone sealants are not
Recommended due to the potential of poor adhesion, cracking and
shrinkage, which could lead to leaks.
APPLICATION AND CLEAN UP TIPS
Use painter’s tape to mask off the seam to help make cleaning up
easier. Maintain a constant speed when applying the bead. Use a caulk
tool or a plastic spoon to work the sealant into the joint. Wetting the
tool with denatured alcohol will help create a smooth nish. Follow the
directions on the back of the tube for cure time.
NOTICE: Certain chemicals and cleaners may deteriorate acrylic
surfaces, causing cracks and, potentially, property damage. After
application/installation, clean up the product surface and remove
any excess sealant with denatured alcohol only. Do not use solvents
(turpentine, lacquer thinner, mineral spirits, paint thinner, MEK, xylene,
acetone, naphtha, etc.)
MODEL#
DATE OF INSTALLATION
Important Sealant Information
READ PRIOR TO INSTALLATION
www.deltafaucet.com
800-355-2721
[e-mail]