Installation Guide

5
Measure location for plumbing xtures.
Measure and mark plumbing xture locations on back
of shower wall. Using proper size hole saw, cut out
plumbing xture holes from back side of panel.
Apply beads of adhesive to the corner panel, then
trowel out. Apply beads to both inside vertical corners,
near the edges.
Press corner panel into position. Use painters tape to
hold in position for 24 hours.
Trowel adhesive onto the drywall. Only apply adhesive
for one panel at a time. Install rst panel. Press rmly
on wall panel to ensure complete contact. Repeat for
second panel.
6
7
3
3
2
2
1
8
Vertical beads
5
93967 Rev. A