Technical Specifications

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2011 LHMC, A Masco Company
"B"
3 1/32"
[77.0 mm]
2 3/4"
[70.4 mm]
"A"
Classic
ASSIST BAR ASSEMBLY
LENGTH A (Centre to Centre) B (Total Length)
12" 12" (304.8 mm) 15 1/32" (381.8 mm)
16" 16" (406.4 mm) 19 1/32" (483.4 mm)
18" 18" (457.2 mm) 21 1/32" (534.2 mm)
24" 24" (609.6 mm) 27 1/32" (686.6 mm)
32" 32" (812.8 mm) 35 1/32" (889.8 mm)
36" 36" (914.4 mm) 39 1/32" (991.4 mm)
42" 42" (1066.8 mm) 45 1/32" (1143.8 mm)
48" 48" (1219.2 mm) 51 1/32" (1296.2 mm)
MATERIALS: Assist bar is constructed using 1 1/4" diameter 20 gauge stainless steel tubing.
Decorative post is cast in zinc.Meets ADA and ANSI A117.1-2003 for form and
load bearing requirements
INSTALLATION: Install Assist bar with 3 - #10 x 2-1/2" pan head stainless steel screws provided for
each end wall flange.
OPTIONAL FASTENER INFORMATION:
Wall studs or Wood blocking is preferable behind all wall surfaces. If wood blocking is
not available, the following fasteners are suggested: Non-Stud Wall anchor.
SPECIFICATION: Surface mounted Assist Bar shall be model___________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
TECHNICAL DATA

Summary of content (1 pages)