User's Manual

Chapter 3 Creating and Editing Screens
Revision May, 2010 3-109
Property Description of Goto Screen / Previous Page Buttons
Trigger
Trigger Type
The user can use this setting to trigger the designated controller
address to be ON before or after writing the setting value. Please
note that this function can only trigger the controller address to be
ON. If the controller address needs to be triggered again, the user
should set the address to be OFF manually.
This dialog box will pop up only when the button function is “Goto
screen”.
Close Sub-Screen
When this option is selected, it indicates that
this Goto screen button is only valid in
Sub-Screen. When pressing this button, the
current (active) sub screen will be closed.
Setting
User’s security level
will be set to Low
Security after
changing screen.
When this option is selected, it will force the
current user’s priority to be the lowest after
the button is pressed. This can prevent the
misoperation made by the user (operator).
User Security Level
Use this option to set the user priority for pressing this element.
Only the priority that is equal to or higher than the current setting
can use this element.