User's Manual

Chapter 3 Creating and Editing Screens

3-294 Revision May, 2010

Update

This command updates macro files. If this function is not used after

editing a macro, changes are not updated. With this function, the user

can know if it is necessary to change the macro or not. If the macro is not

updated. When this icon is clicked, the system will perform the

examination of macro syntax. If the macro syntax is correct, the update

function will be executed and the macro files will be updated. When the

user tries to close Macro Command dialog box without pressing this

Update button, the following dialog box will show up on the screen to

alert the user.

After Yes button is pressed, the system will examine if the macro syntax

is correct. If the macro syntax is correct, the update function will be

executed and the macro files will be updated. However, if the macro

syntax is not correct, the following error message dialog box will pop up

on the screen to alert the user. At this time, please examine the macro

syntax again.

Insert

This command inserts a macro between two lines. The lines below will

move down by one line.

Delete

This command deletes the selected line. The lines below will move up by

one line.

Comment

To write comments in programs, the user can put a comment mark

(#) in

front of sentences. The sentences from the comment mark to the end are

comments. Please note that the content of the comments will not be

ecuted.