User's Manual

Chapter 3 Creating and Editing Screens
3.7.10 Cross Reference Table
When creating and editing various kinds of elements, often the same address is reused.
To avoid this situation, HMi provides the cross reference table function for user’s
convenience and quick reference. The user can view the read/write addresses of the selected
element and see its relationship or connection with the addresses of other elements, macro
commands or the system control area. The first row of the cross reference table displays the
referred element that the user selected. The following rows display the elements which have
the same write address. The user can double-click a specific row and HMi will switch to the
corresponding screen of the referred address. In Fig. 3-7-15, we can see that alarm address
and macro command use the same internal memory $50.
Fig. 3-7-15 Cross Reference Table
3.7.11 Element Part List
When the Element Part List function is enabled, HMi sorts out and classifies all the elements
on the current screen. The user can click the tab to switch to the classification that the user
wants to view. The related addresses and corresponding properties are listed in each
classification (Name, Describe, Write / Read address, Trigger address, Trigger type, Interlock
and Level) in each tab. The user can double-click the column to let HMi select the element
automatically and allow the user to edit the detailed property of the selected element in the
property table.
Revision May, 2010 3-75