Specification Sheet

Page 4.C.1
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–DEMD-200 Rev. E
DEMD Series
Electronic Lavatory Faucets (Infrared)
SPECIFICATION: (example)
• Deck mount electronic lavatory faucet
• Sensor detects user’s hand to activate water flow
• Six 1.5V batteries (included)
• Adjustable maximum run time and optional Remote
Control below
• Above deck electronics
• Red light indicator blinks when battery is low
• 0.5 gpm (1.9 L/min) aerator
DEMD-201 SERIES
• Electronic faucet for cold or pre-mixed water
DEMD-211 SERIES
• Electronic faucet with mixer to adjust temperature
OPERATION
Sensing Range:
• Factory set to 8.0" ± 1.5" (200 mm ± 40 mm)
• Adjustable from 3.15" to 11.8"
(80 mm to 300 mm) with optional remote control
Maximum Run Time:
• 90 seconds, adjustable with remote control
OPTIONAL ACCESSORIES (Order Separately)
060967A
• Remote Control – allows adjustment of sensor range,
maximum run time, delayed close time, temporary shut
off for cleaning and factory settings reset
061202A (Chrome)
061202ANS (Nickel Stainless)
• 1.5 gpm (5.7 L/min) Careguard
®
laminar outlet
061200A (Chrome)
061200ANS (Nickel Stainless)
• 1.0 gpm (3.8 L/min) outlet
2.5
2
1.5
1
.5
0
0
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
STANDARD
OPTIONAL
Line Pressure (psig)
FLOW RATE vs PRESSURE
Outlet Flow Rates
Note: Measurements may vary ± 6mm (0.25")
Refer to www.specselect.com for individual models.
Note: Use this page as a product submittal sheet.
DEMD-211LF (BATTERY OPERATED WITH USER MIX)
DEMD-201LF (BATTERY OPERATED WITH NO MIX)
BELOW DECK
BATTERY PACK
ABOVE DECK
SENSOR AND
ELECTRONICS
55 mm
(2.15")
290 mm
(11.42")
198 mm
(7.79")
374 mm
(14.74")
269 mm
(10.60")
525 mm
(20.67")
FEMALE
CONNECTOR
MALE
CONNECTOR
Ø 32 MM (1.25")
MIN. HOLE SIZE
Ø 38 MM (1.50")
MAX. HOLE SIZE
O-RING TO SEAL
FAUCET TO DECK
32 mm
(1.25")
MAX. DECK
THICKNESS
DECK
HARDWIRE CONVERSION OF DEMD-200 SERIES
A
One 060958A DEMD plug in transformer
(120VAC to 9VDC)
PLUS
One 061014A female by female connector
B
One 060704A hardwire 20VA transformer
(120VAC to 24VAC)
PLUS
One 060974A DEMD converter
(24VAC to 9VDC)
PLUS
One 061014A female by female connector
Requires SEPARATE order of either:
OR
MODEL # FINISH
DEMD-201LF Chrome
DEMD-201LF-NS Nickel Stainless
MODEL # FINISH
DEMD-211LF Chrome
DEMD-211LF-NS Nickel Stainless
55 mm
(2.15")
DECK
RED/BLUE
TEMPERATURE
INDICATORS
ON HANDLE
NON-REMOVABLE
EXTERNAL MIXER
HANDLE
14º
BELOW DECK
BATTERY PACK
160 mm
(6.29")
160 mm
(6.29")
ABOVE DECK
SENSOR AND
ELECTRONICS
Ø 32 MM (1.25")
MIN. HOLE SIZE
Ø 38 MM (1.50")
MAX. HOLE SIZE
525 mm
(20.67")
FEMALE
CONNECTOR
MALE
CONNECTOR
374 mm
(14.74")
O-RING TO SEAL
FAUCET TO DECK
32 mm
(1.25")
MAX. DECK
THICKNESS
290 mm
(11.42")
198 mm
(7.79")
FLOW
(L/min)
FLOW
(GPM)
Approvals:
• IAPMO certified
• Complies to ASME A112.18.1/CSA B125.1
• Indicates ADA compliance to
ICC/ANSI A117.1/ADA
• Verified compliant with 0.25% weighted
average Pb content regulations
(Contact Delta Representative for State and/or
Local Approvals.)