Specification Sheet

Page 4.C.1
L
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–DEMD-200 Rev. G
DEMD Series
Electronic Lavatory Faucets (Infrared)
SPECIFICATION: (example)
Deck mount electronic lavatory faucet
Sensor detects user’s hand to activate water flow
Six 1.5V batteries (included)
Above deck electronics
Red light indicator blinks when battery is low
DEMD-201 SERIES
Electronic faucet for cold or pre-mixed water
o DEMD-201LF (Chrome)
0.5 gpm (1.9 L/min) spray outlet
o DEMD-201LF-NS (Nickel Stainless)
0.5 gpm (1.9 L/min) spray outlet
DEMD-211 SERIES
Electronic faucet with mixer to adjust temperature
o DEMD-211LF (Chrome)
0.5 gpm (1.9 L/min) spray outlet
o DEMD-211LF-NS (Nickel Stainless)
0.5 gpm (1.9 L/min) spray outlet
o DEMD-211-15LF (Chrome)
1.5 gpm (5.7 L/min) Careguard
®
laminar
o DEMD-211-15LF-NS (Nickel Stainless)
1.5 gpm (5.7 L/min) Careguard
®
laminar
OPERATION
Sensing Range:
Factory set to 8.0" ± 1.5" (200 mm ± 40 mm)
Adjustable from 3.15" to 11.8"
(80 mm to 300 mm) with optional remote control
Maximum Run Time:
90 seconds, adjustable with remote con trol
OPTIONAL ACCESSORIES (Order Separately)
o 060967A
Remote Control – allows adjustment of sensor
range, maximum run time, delayed close time,
temporary shutoff for cleaning and factory
settings reset
o 061200A (Chrome)
o 061200ANS (Nickel Stainless)
1.0 gpm (3.8 L/min) aerator
2.5
2
1.5
1
.5
00
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
0.5 GPM STANDARD
1.5 GPM STANDARD
OPTIONAL
Line Pressure (psig)
FLOW
(L/min.)
FLOW
(gpm)
FLOW RATE vs PRESSURE
Outlet Flow Rates
Note: Measurements may vary ± 6mm (0.25")
Refer to www.specselect.com for individual models.
Note: Use this page as a product submittal sheet.
DEMD-211LF (BATTERY OPERATED WITH USER MIX)
DEMD-201LF (BATTERY OPERATED WITH NO MIX)
BELOW DECK
BATTERY PACK
ABOVE DECK
SENSOR AND
ELECTRONICS
55 mm
(2.15")
160 mm
(6.29")
290 mm
(11.42")
198 mm
(7.79")
374 mm
(14.74")
269 mm
(10.60")
525 mm
(20.67")
FEMALE
CONNECTOR
MALE
CONNECTOR
Ø 32 MM (1.25")
MIN. HOLE SIZE
Ø 38 MM (1.50")
MAX. HOLE SIZE
O-RING TO SEAL
FAUCET TO DECK
32 mm
(1.25")
MAX. DECK
THICKNESS
DECK
HARDWIRE CONVERSION OF DEMD-200 SERIES
A
One 060958A DEMD plug in power supply,
output 9VDC
plus
One 061014A female by female connector
B
One 060704A hardwire 20VA transformer
(120VAC to 24VAC)
plus
One 060974A DEMD converter
(24VAC to 9VDC)
plus
One 061014A female by female connector
Requires SEPARATE order of either:
OR
BELOW DECK
BATTERY PACK
ABOVE DECK
SENSOR AND
ELECTRONICS
55 mm
(2.15")
160 mm
(6.29")
290 mm
(11.42")
198 mm
(7.79")
374 mm
(14.74")
269 mm
(10.60")
525 mm
(20.67")
FEMALE
CONNECTOR
MALE
CONNECTOR
Ø 32 MM (1.25")
MIN. HOLE SIZE
Ø 38 MM (1.50")
MAX. HOLE SIZE
O-RING TO
SEAL FAUCET
TO DECK
32 mm
(1.25")
MAX. DECK
THICKNESS
DECK
RED/BLUE
TEMPERATURE
INDICATORS
ON HANDLE
NON-REMOVABLE
EXTERNAL MIXER
HANDLE
Approvals:
IAPMO certified
Complies to ASME A112.18.1/CSA B125.1
Indicates compliance to
ICC / ANSI A117.1
Verified compliant with 0.25% weighted average Pb
content regulations
(Contact Delta Representative for State and/or Local
Approvals.)

Summary of content (1 pages)