Dimensions Guide

ManualsBrandsDelta ManualsBath9 in. x 7/8 in. Exposed Screw Residential Assist Bar in Venetian Bronze

Grab Bars

5215

TECHNICAL DATA

2-1/4"

57 mm

7/8"

22 mm

Assist Bars

500 Series

76 mm

2-3/8"

60 mm

MATERIALS: Assist bar posts are made in zinc die cast alloy. Castings are polished

and plated with chrome, polished brass or white polyester powder coat.

Bars are 7/8” O.D. x (21 gauge) type 304 stainless steel and are

chrome plated, polished brass or white polyester powder coat.

INSTALLATION: Assemble posts and bar by tightening 1/4" x 20" x 1-1/2" nylon fastener

under each post until bar is secure. Install posts and bar with

3 - #8 x 1-1/2" flat head stainless steel screws per post.

Note: 500 series grab bars are engineered to meet 300 lbs. pull when properly installed.

SPECIFICATION: Surface mounted assist bar shall be model__________________________

(fill in model number) by Liberty Hardware

Manufacturing Corporation.

"A"

"B"

(448 mm)

(391 mm)

(270 mm)

(213 mm)

(406 mm)(229 mm)

17-5/8"

15-3/8"

16"

(651 mm)

(594 mm)

(610 mm)

25-5/8"

23-3/8"

24"

10-5/8"

DIM "B"

8-3/8"DIM "A"

9"LENGTH

MATERIALS: Unit is fabricated of 1-1/4" diameter 18 gauge type 304 stainless steel tubing with #4 satin finish and knurled grip. Back plate is 1/4”

thick, one piece design with supports and is molded out of solid aluminum. Tubing is heliarc welded and is assembled onto a swivel

hinge. A stainless steel wall retaining clip is included to insure that bar is held in the upright position.

INSTALLATION: Unit absolutely must be secured to in-wall reinforcement backing capable of withstanding a minimum 500 pounds download pull. Unit is

attached with 4 bolts with a minimum 1/4” (6 mm) diameter and the wall retaining clip is attached at the proper height and centered to

receive the tubing when lifted to the upright position.

SPECIFICATION: Surface mounted grab bar shall be model__________________________

(fill in model number) by Liberty Hardware

Manufacturing Corporation.

1-1/4"

32 mm

3-3/4"

121 mm

5-23/32"

145 mm

8-1/16"

204.3 mm

30-5/16"

770 mm

10-15/32"

266 mm

11-13/32"

290 mm

20"

508 mm

Liberty Hardware

Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com