Specification

TECHNICAL DATA
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2012 LHMC, A Masco Company
CP5116
Assist Bars
Decorative Assist Bars
(64.5 mm)(286mm or 464mm)
2-1/2"
(58 mm)
2-1/4"11-1/4" or 18-1/4"
MATERIALS: Assist bar posts are made in zinc die cast alloy. Castings are
polished and plated. Bars are 7/8” O.D. x (21 gauge) type 304
stainless steel.
INSTALLATION: Assemble posts and bar by tightening fastener under each
post until bar is secure. Install posts and bar with
3 - #8 x 1-1/2" flat head stainless steel screws per post.
Note: 500 series grab bars are engineered to meet 300 lbs.
pull when properly installed.
SPECIFICATION: Surface mounted assist bar shall be
model__________________________
(fill in model number) by Liberty Hardware Manufacturing
Corporation.
(Height)(Total Length
12" & 16")
B
(Post Base
Diameter)
CA
Alexandria
(64.5 mm)(286mm or 464mm)
2-1/2"
(58 mm)
2-1/4"11-1/4" or 18-1/4"
Crestfield
(64.5 mm)(286mm or 464mm)
2-1/2"
(58 mm)
2-1/4"11-1/4" or 18-1/4"
Greenwich
(64.5 mm)(290mm or 468mm)
2-1/2"
(60 mm)
2-3/8"11-3/8" or 18-3/8"
Victorian
(68 mm)(292mm or 470mm)
2-11/16"
(64 mm)
2-1/2"11-1/2" or 18-1/2"
Silverton
Collection