Specification

Decorative Assist Bars
MATERIALS: Assist bar is constructed using 7/8" diameter 304 stainless steel tubing.
Decorative shelf is made of polypropylene.
INSTALLATION: The assist bar is installed using (4) 1/4 X 2-1/2 Hex head lag screws.
Assist bars will yield the maximum holding capacity when installed
into solid wood wall studs and or wood blocking. Wood blocking is
therefore preferred behind all wall surfaces where grab bars will be mounted.
Additional caulking may be necessary on rough or uneven surfaces.
SPECIFICATION: __________________ shall be model ___ by Liberty Hardware
®
Manufacturing
Corporation.