Specification

Decorative Assist Bars

MATERIALS: Assist bar is constructed using 7/8" diameter 304 stainless steel tubing. Decorative posts are zinc die cast. Roller

is made of matching plastic and is spring actuated.

INSTALLATION: The assist bar is installed using (2) 1/4 X 2-1/2 Hex head lag screws.

Assist bars will yield the maximum holding capacity when installed into solid wood

wall studs and or wood blocking. Wood blocking is therefore preferred behind all wall

surfaces where grab bars will be mounted. Additional caulking may be necessary on rough

or uneven surfaces.

SPECIFICATION: __________________ shall be model ___ by Liberty Hardware

Manufacturing

Corporation.

PAGE 1
Decorative Assist Bars MATERIALS: Assist bar is constructed using 7/8" diameter 304 stainless steel tubing. Decorative posts are zinc die cast. Roller is made of matching plastic and is spring actuated. INSTALLATION: The assist bar is installed using (2) 1/4 X 2-1/2 Hex head lag screws. Assist bars will yield the maximum holding capacity when installed into solid wood wall studs and or wood blocking. Wood blocking is therefore preferred behind all wall surfaces where grab bars will be mounted.