Installation & Assembly

ManualsBrandsDelta ManualsBathroom Remodel & Bathroom FixturesUniversal Mixing Rough-In Valve with Service Stops

08/13/13 Rev. A

MULTICHOICE

UNIVERSAL JETTED SHOWER AND

JETTED SHOWER XO

ROUGH-IN VALVE BODIES

REGADERA A CHORRO MULTICHOICE

UNIVERSAL

Y VÁLVULAS PARA LA INSTALACIÓN PRELIMINAR

INTERNA JETTED SHOWER XO

CORPS DE SOUPAPE MULTICHOICE

UNIVERSAL

JETTED SHOWER ET JETTED SHOWER XO

Models/Modelos/Modèles

R18000, R18000-WS,

R18000-XO, R18000-XOWS,

R18222-XO, R18222-XOWS,

R18224 & R18224-WS

Series/Series/Seria

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

ASME A112.18.1 / CSA B125 .1

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

SILICONE

Icons

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely before beginning.

• To READ ALL warnings, care, and maintenance information.

THIS ROUGH-IN BODY MEETS OR EXCEEDS THE

FOLLOWING STANDARDS:

ASME A112.18.1 / CSA B125.1

NOTICE TO INSTALLER: CAUTION!–As the installer of this rough-

in body, it is your responsibility to properly INSTALL this rough-in

body per the instructions given. YOU MUST inform the owner/

user of this requirement by following the instructions. If you or

the owner/user are unsure how to properly install this rough-in body,

please refer to the instructions supplied and if still uncertain, call

us at 1-800-345-DELTA (3358). Leave this Instruction Sheet for the

owner's/user's reference.

Para instalación fácil de su llave Delta

usted necesitará:

• LEER TODAS las instrucciones completamente antes de empezar

• LEER TODOS los avisos, cuidados, e información de mantenimiento.

ESTA VALVULA CUMPLE O EXCEDE LAS SIGUIENTES

NORMAS:

ASME A112.18.1 / CSA B125.1

AVISO AL INSTALADOR: ¡PRECAUCIÓN!- Como instalador de la

tubería interna - dentro de la pared/piso, es su responsabilidad

INSTALAR esta pieza correctamente como se describe en las

instrucciones que le damos. USTED DEBE informarle al

propietario/usuario, siguiendo las instrucciones dadas, de este

requisito. Si usted o el propietario/usuario no están seguros como se

instalan correctamente las tuberías internas, por favor refiérase a las

instrucciones proporcionadas y si todavía no está seguro, llámenos al

1-800-345-DELTA (3358). Deje esta hoja de instrucciones como refer-

encia para el propietario/usuario.

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes les instructions de

nettoyage et d’entretien;

CE ROBINET SATISFAIT AUX EXIGENCES DES NORMES

ASME A112.18.1 / CSA B125.1

OU LES SURPASSE.

AVIS À L’INSTALLATEUR : ATTENTION! – En qualité d’installateur,

vous est tenu de bien INSTALLER ce corps de robinet

conformément aux instructions. VOUS DEVEZ informer le

propriétaire ou l’utilisateur de cette exigence. En cas de doute

quant à la marche à suivre pour installer ce corps de robinet, veuillez

lire les instructions fournies et, au besoin, veuillez nous appeler au

1-800-345-DELTA (3358). Veuillez laisser ce feuillet d’instructions

au propriétaire ou à l’utilisateur pour qu’il puisse le consulter s’il

y a lieu.

R18000

R18000-XO

R18222-XOWS

77499

R18224-WS

R18224

R18222-XO

R18000-WS

R18000-XOWS

Summary of content (8 pages)

PAGE 1
MULTICHOICE® UNIVERSAL JETTED SHOWER AND JETTED SHOWER XO® ROUGH-IN VALVE BODIES REGADERA A CHORRO MULTICHOICE® UNIVERSAL Y VÁLVULAS PARA LA INSTALACIÓN PRELIMINAR INTERNA JETTED SHOWER XO® CORPS DE SOUPAPE MULTICHOICE® UNIVERSAL JETTED SHOWER ET JETTED SHOWER XO® 77499 ASME A112.18.1 / CSA B125 .1 Models/Modelos/Modèles R18000, R18000-WS, R18000-XO, R18000-XOWS, R18222-XO, R18222-XOWS, R18224 & R18224-WS Series/Series/Seria R18000 Write purchased model number here.
PAGE 2
Limited Warranty on Brizo Delta® Faucets Parts and Finish Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Delta®® faucet are warranted All parts (other consumer than electronic parts and batteries) and finishes this Brizo are warranted to the original purchaser to be free from defects in of material and faucet workmanship for as to theasoriginal consumer purchaser to beowns free the from defects in material and was workmanship for or, as long the original consume
PAGE 3
R18000, R18000-XO, R18000-WS & R18000-XOWS Replacement Parts Piezas de Repuesto Pièces de rechange RP40972 Test Caps Tapa de Prueba Capuchon d’essai RP22734 Bonnet Bonete Chapeau RP46078 Test Cap Tapa de Prueba Capuchon d’essai Plasterguard Protector de Enlucido Base du protecteur RP39404 Plasterguard/Thin Wall Mounting Bracket Protector de Enlucido/Pared Delgada Soporte de Montura Base du protecteur/Support de Montage sur Paroi Mince RP25513 Stem Assembly Ensamble de la Unidad del Vástago Obturateurs R
PAGE 4
R18000 & R18000-WS A. B. 6 7 8 1 3 1 5 4 3 2 8 9 7 2 If you are making a back to back or reverse installation (hot on right and cold on left), install the valve body as described, but reverse the water supply lines. After soldering, reinstall all parts in reverse order; ensure bonnet nuts are tightened securely. R18000-WS: Install the stops into the body as follows: Thread nut (7) on stem (8) as shown.
PAGE 5
R18000-XO & R18000-XOWS A. B. 6 7 8 1 1 5 3 4 2 3 2 8 9 7 If you are making a back to back or reverse installation (hot on right and cold on left), install the valve body as described, but reverse the water supply lines. After soldering reinstall all parts in reverse order; ensure bonnet nuts are tightened securely. A. The distance (1) from the stringer to the front of the jet spray bonnet is 3". Distance (2) from the stringer to the front of the valve plasterguard is 2.8" (71 mm).
PAGE 6
R18222-XO & R18222-XOWS B. A. 5 6 7 1 2 1 4 3 8 7 6 2 A. Distance (1) from the stringer to the front of the valve plasterguard is 2.8" (71 mm). Reinstall all parts in reverse order; ensure bonnet nuts are tightened securely. Distance (2) from the stringer to the front of the valve bonnet is 3.9" (99 mm). R18222-XOWS - Install the stops into the body as follows: Thread nut (6) on stem (7) as shown.
PAGE 7
R18224 & R18224-WS B. A. 5 6 7 1 2 4 3 1 8 7 6 2 A. Distance (1) from the stringer to the front of the valve plasterguard is 2.8" (71 mm). Reinstall all parts in reverse order; ensure bonnet nuts are tightened securely. Distance (2) from the stringer to the front of the valve bonnet is 3.9" (99 mm). B. Remove the bonnet nut, stem and stem extender, seat, spring, and plasterguard (1), plus, the screen, test cap, bonnet nut, plasterguard and cover (2) before soldering.
PAGE 8
C. R18000 & R18000-WS R18224 & R18224-WS R18000-XO & R18000-XOWS R18222-XO & R18222-XOWS 3 1 1 3 1 3 2 1 2 3 2 2 2 2 2 1 4 2 1 3 3 4 4 4 4 3 4 3 4 4 C. R18000, R18000-WS, R18224 & R18224-WS C. R18000-XO, R18000-XOWS, R18222-XO & R18222-XOWS C. R18000, R18000-WS, R18224 y R18224-WS C. R18000-XO, R18000-XOWS, R18222-XO y R18222-XOWS C. R18000, R18000-WS, R18224 et R18224-WS C.