Installation Owner's Manual

ManualsBrandsDelta ManualsBathroom Remodel & Bathroom FixturesLinden Double Handle Deck Mounted Roman Tub Faucet Trim

Model/Modelo/Modéle

T2794 & T4794

Series/Series/Seria

Addison

™

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

1/8" (3.17mm)

3/32" (2.38mm)

1/8" (3.17mm)

3/32"

(2.38mm)

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS

PARA BAÑERA ROMANA DE DOS

MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE

ROBINET À DEUX POIGNÉES POUR

BAIN ROMAIN

8/25/14 Rev. Awww.deltafaucet.com

86648

For easy installation of your Delta faucet

you will need:

・

READ ALL

the instructions completely before

beginning.

・

READ ALL

warnings, care and maintenance

information.

・

To purchase the correct

water supply hook-up.

Para instalación fácil de su llave Delta

usted necesitará:

・

LEER TODAS

las instrucciones completamente

antes de empezar.

・

LEER TODAS

los avisos, cuidados, e información

de mantenimiento.

・

Comprar las conexiones correctas para el

suministro de agua.

Pour installer votre robinet Delta

facilement, vous devez:

・

LIRE TOUTES

les instructions avant de débuter.

・

LIRE TOUE LES

les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

・

Acheter le bon

nécessaire de raccordement.

Summary of content (8 pages)

PAGE 1
TWO HANDLE ROMAN TUB TRIM 86648 LLAVE Y SUS ACCESORIOS PARA BAÑERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN Model/Modelo/Modéle T2794 & T4794 Series/Series/Seria Addison™ Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 3/32" (2.38mm) 1/8" (3.
PAGE 2
Limited Warranty on Delta® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Delta® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.
PAGE 3
Model / Modelo / Modèle T2794 Specify Finish Especifíque el Acabado Précisez le Fini RP70636 Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP52139 Set Screw Tornillo de Ajuste Vis de Calage RP52593 Stream Straightener, Gasket & Wrench Enderezador del Chorro, Empaque y Llave Concentrateur de Jet, Joint et Clé RP52596 Gasket Empaque Joint RP70637 Handle Base, Nut & Gasket Base de la Manija, Tuerca y Empaque Bae, écrou et joint de manette RP70635 Handle Assembly Ensamble de la Manij
PAGE 4
B. A. 2 T4794 1 2 3 1 2 RP40668 Diverter Assembly Ensamble del Desviador Dérivation 3 1 Maintenance Cleaning and Care Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. A. If faucet leaks from spout outlet–Shut off water supplies– Replace Seats and Springs (1).
PAGE 5
1 T2794 2 T2794 5 7 1 1 3 4 1 6 2 3 T4794 T4794 5 1 2 7 3/32" (2.38 mm) 3/32 po 1 3 4 1 6 3 NOTE: The deck and valve rough-in must be finished before installing the trim kit. 2 Screw bases (1) with gaskets (2) over end valves (3). Option: Use silicone under the gasket if deck is uneven. Install gasket (4) and spout (5) on the spout adapter (6). Be sure spout is resting firmly on the deck. Install set screw (7) and tighten to secure the spout.
PAGE 6
3 A. C. T4794 T4794 1 1 2 4 3 B. D. T4794 T4794 1 1 2 For Model T4794 Only A. Install lift rod (1). Screw the lift rod until it drops down and C. Slide hose (1) through conical nut (2). Attach hose (1) to braided B. Remove and discard the test cap and gasket (1). NOTE: This is an D. Install base (1) to nest (2) and tighten. OPTION: Use silicone metal hose (3) using gasket (4) and tighten. DO NOT install hand piece yet. rotates freely. extra gasket, one is supplied with the hose.
PAGE 7
T2794 5 4 1 1 T4794 1 2 1 2 Install handles. Be sure glide ring (1) is properly seated in bottom of handle before installing. If either handle does not rotate in the correct direction, do the following: 1. Be sure that the end valves are installed correctly (with the hot valve on the LEFT and both inlet tubes installed AWAY from the spout). 2. Turn off the water supplies and remove the handle, bonnet nut, and stem unit. 3.
PAGE 8
6 A. T4794 B. T4794 1 2 3 2 1 For Model T4794 Only A. Pull hose (1) to its farthest extension and point it down into the B. Attach hand piece (1) to hose (2) with gasket (3) between connection. Refer to maintenance section (page 4) for correct diverter and lift rod function. tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position. Sólo para los Modelo T4794 B.