Installation Instructions

ManualsBrandsDelta ManualsBathroom Remodel & Bathroom FixturesCassidy Deck Mounted Roman Tub Faucet Trim with Diverter

4/9/15 Rev. F

SILICONE

T2797-LHP T4797-LHP

www.deltafaucet.com

67776

1/8" (3.17mm)

3/32"

(2.38mm)

Model/Modelo/Modéle

T2797-LHP & T4797-LHP

Series/Series/Seria

Cassidy

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS PARA BAÑERA

ROMANA DE DOS MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE ROBINET

À DEUX POIGNÉES POUR BAIN ROMAIN

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Rough-in mounting / valving required to complete installation

El montaje / la valvulería eléctrico/a oculto/a que se requiere para completar la instalación

Plomberie brute montée/à soupape nécessaire pour terminer l’installation

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and

maintenance information.

• To complete the deck and valve rough-in prior to

installing this trim kit.

Para instalación fácil de su llave

Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

• Para completar el borde y la instalación de vál-

vulas dentro de las paredes previa a la

instalación de la llave y sus accesorios.

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

• Installez le corps du robinet et terminez le

pourtour du bain avant de poser les accessories

de finition.

Summary of content (8 pages)

PAGE 1
TWO HANDLE ROMAN TUB TRIM 67776 LLAVE Y SUS ACCESORIOS PARA BAÑERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN Model/Modelo/Modéle T2797-LHP & T4797-LHP Series/Series/Seria CassidyTM T2797-LHP T4797-LHP Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
Model / Modelo / Modèle T2797-LHP Model / Modelo / Modèle T4797-LHP ▲ Specify Finish Especifíque el Acabado Précisez le Fini ▲ Specify Finish Especifíque el Acabado Précisez le Fini RP72719▲ Lift Rod Barra de alzar Tige de Manoeuvre RP73284▲ Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP72724▲ Finial Pomo Grain RP73284▲ Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP72723▲ Spout Base w/Gasket Base del Tubo de Salidacon con Empaque Embase du Bec ave
PAGE 4
A. B. T4797-LHP 1 2 3 2 1 3 2 RP40668 Diverter Assembly Ensamble del Desviador Dérivation 1 Maintenance B. Model T4797-LHP If faucet does not divert water from the spout to the hand shower, check that the lift rod (1) is securely threaded into the diverter (2). If the problem persists remove the lift rod and spout. Replace the diverter assembly RP40668. A. If faucet leaks from spout outlet: Shut off water supplies – Replace Seats and Springs (1).
PAGE 5
1 T2797-LHP 2 T2797-LHP 5 7 8 1 4 1 6 T4797-LHP 2 3 T4797-LHP 1 2 5 7 3/32" (2.38 mm) 8 4 1 6 NOTE: The deck and valve rough-in must be finished before installing the trim kit. 2 3 Place bases (1) with gaskets (2) over end valves (3). OPTION: Use silicone under the gasket if deck is uneven. Install gasket (4) and spout (5) on the spout adapter (6). Be sure spout is resting firmly on the deck. Install set screw (7) and tighten to secure the spout (5). Insert button (8) into set screw hole.
PAGE 6
3 A. C. T4797-LHP T4797-LHP 1 1 3 2 5 4 B. T4797-LHP D. T4797-LHP 2 1 5 3 1 4 C. Remove conical nut (1) from handshower nest (2) and insert braid- For Model T4797-LHP Only ed metal hose through the handshower nest. Reassemble test cap (3) to braided hose to hold hose in place. Place handshower nest (2) on mounting piece (4). align in selected direction and tighten by escutcheon (5). OPTION: Use silicone under the base if deck is uneven. A. Install lift rod (1).
PAGE 7
5 4 T2797-LHP 1 1 T4797-LHP 1 1 2 3 2 Install handles (not included) and secure with set screw (1) Be sure glide ring (2) is properly seated in bottom of handles before installing. Push in button cover (3) to conceal set screw (1). Model T2797-LHP Turn faucet handles (1) all the way on. Turn on hot and cold water supplies and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts.
PAGE 8
6 A. B. T4797-LHP T4797-LHP 2 1 1 3 2 For Model T4797-LHP Only B. Attach hand piece (1) to hose (2) with gasket (3) between connection. Refer to maintenance section (page 4) for correct diverter and lift rod function. A. Pull hose (1) to its farthest extension and point it down into the tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position.