Specification

"A"
"C"
"B"
1 5/8"
[41.6 mm]
18"
[457.2 mm]
2 1/4"
[57.5 mm]
REF
HARVARD GRAB BAR
16", 24" GRAB BAR
LENGTH
A
(Total Length)
B
(Height)
C
(Post Base
dimension)
16"
19 1/8"
(485.5 mm)
3 3/32"
(78.5 mm)
3 1/8"
(79.1 mm)
24"
27 1/8"
(688.7 mm)
3 3/32"
(78.5 mm)
3 1/8"
(79.1 mm)
MATERIALS: Grab bar is constructed using 1-1/4" diameter 20 gauge 304 stainless steel tubing.
Decorative posts and trim rings are cast in zinc. Trim rings are held in place using a
friction fit. Meets ADA and ANSI A117.1-2003 for form and load bearing
requirements.
INSTALLATION: Install grab bar with 3 - #10 x 2-1/2” flat head stainless steel screws provided for
each end wall flange. Slide cover flanges over wall flanges and press firmly to
complete installation.
OPTIONAL FASTENER INFORMATION:
Wall studs or Wood blocking is preferable behind all wall surfaces. If wood blocking is
not available, the following fasteners are suggested: Non-Stud Wall anchor.
SPECIFICATION: Surface mounted Grab Bar shall be model__________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.