Instructions

- 6 -
#0 O R Model name #24 O R/W
CH1 K
D
#1 X R/W CH1~CH4 Mode setting #25 O R/W
CH2 K
D
#2 X R
PID Output % at CH1
#26 O R/W
CH3 K
D
#3 X R
PID Output % at CH2
#27 O R/W
CH4 K
D
#4 X R
PID Output % at CH3
#28 X R/W
Run/Stop & Auto tuning
Bit0：CH1 PID Run/Stop
Bit1：CH2 PID Run/Stop
Bit2：CH3 PID Run/Stop
Bit3：CH4 PID Run/Stop
0=PID Stop，1=PID Run
Bit4：CH1 Auto tuning
Bit5：CH2 Auto tuning
Bit6：CH3 Auto tuning
Bit7：CH4 Auto tuning
1: The auto tuning function is
enabled. After the auto
tuning is complete, the value
becomes 0.
#5 X R
PID Output % at CH4
CR#2~CR#5: 0~1000; Unit: 0.1%
#6 X R
Average temperature (
0
C) at CH1
#7 X R
Average temperature (
0
C) at CH2
#8 X R
Average temperature (
0
C) at CH3
#9 X R
Average temperature (
0
C) at CH4
CR#6~CR#9：Unit: 0.1%
#10 O R/W Set temperature at CH1
#11 O R/W Set temperature at CH2
#12 O R/W Set temperature at CH3
#13 O R/W Set temperature at CH4
CR#10~CR#13: Set the PID target value (SV)
#14 O R/W CH1 K
P
#29 X R/W
Enter PID mode(H’5678)
K0: Exit the PID mode
#15 O R/W CH2 K
P
#16 O R/W
CH3 K
P
#30 X R Error code
#17 O R/W
CH4 K
P
#31 O R/W CH1 Sampling time
#19 O R/W
CH1 K
I
#32 O R/W CH2 Sampling time
#20 O R/W
CH2 K
I
#33 O R/W CH3 Sampling time
#21 O R/W
CH3 K
I
#34 O R/W CH4 Sampling time
#22 O R/W
CH4 K
I
CR#31~CR#34: 1~30; Unit: 1s
Note: CR#29 must be set to H’5678 so as to enter the PID mode before configuring settings on other
control registers.