HT SERIES DVR USER GUIDE DATE: 2010/08/17 VER 1.1 INDEX 1. Features 4 2. Hardware Overview 6 2-1 Front Panel 7 2-2 Rear Panel 8 2-3. Remote Controller 9 10 3. System Overview 3-1. General Usage Information 10 3-2 LIVE Mode 11 3-2 SETUP Mode 15 3-2-1 DISPLAY 15 3-2-2 Record 16 3-2-3 Device 21 3-2-4. NETWORK 25 3-2-5. SYSTEM 28 32 3-3 Search mode 3-3-1. Search Selection Type 32 3-3-2. Play Mode 34 35 4. Remote software 4-1. Installing Client Program 36 4-2.
HT SERIES DVR USER GUIDE Specifications MODEL NO. HT-04 HT-08 4 Camera input 1 BNC or 1 VGA, Output Selectable HT-16 8 16 Both 1 BNC and 1 VGA Both 1 BNC and 1 VGA Audio input / Output 4 RCA /1 RCA Sensor In/Alarm out 1(NC, NO selectable)/ 1(Relay Output) Embedded Linux OS Operating System Real Time Display Speed 720 X 480(NTSC), 720 X 576(PAL) Display Resolution Display Split screen 1,4, Sequence 1,4,6,8,9,13,16, 1,4,6,8,9, Sequence Sequence H.
HT SERIES DVR USER GUIDE Warnings Installation and servicing should be performed by qualified and experienced personnel only. DVR should always remain OFF during any installation process Product Components The package contains the main unit and its components as specified below. When you purchase the unit, please check to ensure the components specified below are included: DVR Set X1 Client Software CD X1 Remote Control X1 Battery1.
HT SERIES DVR USER GUIDE 1. Features Excellent picture quality Allow recording and reviewing in high quality digital image based on H.264 compression method. High reliability With Embedded hardware and software design, this maintains higher product reliability compared to common PC type products. Support Non-English Character and Input for Camera Titles User can define his own language OSD camera title besides English.
HT SERIES DVR USER GUIDE Display information in easy-to-understand information method This DVR unit enhanced user friendly display information such as date, time, recording method, recording frame number, HDD capacity in monitoring, recording and playing mode.
HT SERIES DVR USER GUIDE 2. Hardware Overview A. Front Panel B.
HT SERIES DVR USER GUIDE C. HDD Installation Remove top cover of the DVR and install HDD HDD D. Sensor / Relay/ PTZ connection Sensor Input Relay Output PTZ connection 2-1 Front Panel 1. IR Sensor: IR receiver for remote controller 2. USB Connectors: USB ports connection for mouse and USB pen drive. 3.
HT SERIES DVR USER GUIDE 2-2 Rear Panel Label VIDEO INPUT Operation 4/ 8 /16 connectors for video input. Connect camera output to Video-in (NTSC/PAL) CRT OUTPUT Connector for CRT TV. VGA OUTPUT Connector for VGA monitor AUDIO 4 Audio Inputs and 1 Audio Output SENSOR IN Connection for sensor device. ALARM OUT One Alarm device output. On/Off switching by using relay. 1A, 24V or 0.5A,125V RS-485 Connect to PTZ camera,+PTZ D+ LAN RJ45 connector for LAN connection.
HT SERIES DVR USER GUIDE 2-3.
HT SERIES DVR USER GUIDE 3. System Overview 3-1. General Usage Information The STANDARD series DVR can be operated with a mouse or remote controller under the four main modes listed below: Live Mode – Allow user to view all live operating cameras and access to Pan/Tilt camera controls. In addition, system status information will be shown during live mode. Setup Mode – Allow user to customize settings for Live viewing, Recording, Backup, and Camera related devices under the Setup Mode.
HT SERIES DVR USER GUIDE 3-2 LIVE Mode In this section, user will learn how to split the video mode into 1, 4, 6, 8, 9, 12, 16, as well as auto sequencing, PTZ Control, Mouse control, Setup configurations and Backup. 1) Live View Status Live View indicators allow user to view the current status of the DVR system. Recording indicator Event recording indicator Motion detection indicator Sensor activation indicator 2) Live Menu Bar Live Menu Bar allows user to view DVR system status and use the shortcut.
HT SERIES DVR USER GUIDE 3) Live Popup Menu User may bring up the Live Popup menu by right-clicking (mouse) anywhere on Live Screen. By using the Live Popup Menu, user can enter any configuration and settings immediately. 3-1) LIVE Mode Feature 1) Split Modify Live View split screen. 4CH : 1/4 Split Mode 8CH : 1/4/6/8/9 Split Mode 16CH : 1/4/6/8/9/13/16 Split Mode 2) Instant Replay Instant Replay provides a very convenient method to catch the abrupt accident immediately.
HT SERIES DVR USER GUIDE 3) PTZ (Pan, Tilt and Zoom) Press ‘PTZ’ button to enter PTZ mode. For Menu setting, user may set it by pressing the button as displayed at bottom of window. • User can set the direction of camera by using the arrow buttons. Zoom +/- Zoom in/out with mouse or play /backward buttons on the remote controller. Focus +/- Adjust the focus with mouse or slow buttons on the remote controller. Iris +/- Adjust the iris with mouse or ff/rew buttons on the remote controller.
HT SERIES DVR USER GUIDE Preset [Enter]: User can enter the preset number using the keypad or “” button on the remote controller. RUN: Enter preset number first, and press “Run” using mouse. SET: Use the arrow buttons to set the direction, followed by preset number, and press “Set” to save this preset. CLEAR: Enter preset number first, and press “Clear” to delete preset.
HT SERIES DVR USER GUIDE 3-2 SETUP Mode Access Setup menu by right clicking on mouse button. 3-2-1 DISPLAY Configure OSD, Main Display and Color Control settings. 1) OSD User may configure Date Format / Time Format / Language / Alpha Blending / OSD / Information Bar options. Date Format: Select from YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY format. Time Format: 24HR – 24 hour military time format 12HR(AM/PM) – 12 Hour separated by AM/PM format Language : Select system language.
HT SERIES DVR USER GUIDE Monitor: Select monitor output between VGA and composite. The screen size will be optimized with the selected monitor. Switching Dwell Time: Setup channels switching time. 3) Color Control Adjust camera color display. Adjust camera image by channels. - Contrast: Adjust contrast of camera. - Brightness: Adjust brightness of camera. - Saturation: Adjust saturation of camera. - Hue: Adjust color of camera. 3-2-2 Record Configure Event In, Record, Group, Holiday settings.
HT SERIES DVR USER GUIDE 1) Rec Type: Select conti (continuous), event, C/E(conti and event) and none(not recording) recording. 2) Audio Rec: Enable/ Disable audio recording. 3) Continuous Recording: ① Resolution: Select recording resolution. -- CIF : 360X240 (NTSC)/ 360X288 (PAL) -- 2CIF : 720X240 (NTSC)/ 720X288 (PAL) -- D1 :720X480 (NTSC)/ 720X576 (PAL) NOTE: D1 resolution = 2 x 2CIF resolution = 4 x CIF resolution ② FPS: Setup recording frame rate per channel.
HT SERIES DVR USER GUIDE 4) Event Recording Event setup method is the same as Conti Recording method. Conti Recording and Event Recording can be operated simultaneously. When there is no event occurs, DVR unit will record under Conti recording mode and vice versa. - Duration(sec): Set post event recording time. User can choose from 1~60 seconds. - Pre alarm(sec): Set pre event recording time. User can choose from 1~5 seconds. * Event recording has higher priority in recording.
HT SERIES DVR USER GUIDE 2) Group With this menu, user can set the group using the scheduler. The settings are similar to “Record” menu. In recording, Schedule recording has a highest priority. Therefore, once weekly scheduler has been activated,, user are not allow to record manually. 3) Holiday User is able to setup the Holiday recording date manually.
HT SERIES DVR USER GUIDE 4) Event In User can setup sensor input and motion detection setup in the menu. User can also setup each channel individually.
HT SERIES DVR USER GUIDE 3-2-3 Device Configure and view Camera, Audio, Motion Detection, Alarm Out, PTZ settings 1) Camera User may configure and/or view camera video type and general camera configuration. Name: Define the camera title. Disable: Disable current camera. It is useful when camera input signal is weak. Covert: Hide current camera from Live view but does not interrupt recording. 2) Audio Audio Out: Select which audio output channel during Live View.
HT SERIES DVR USER GUIDE 3) Motion Detection Change settings for Motion Grid selection and Sensitivity Level Sensitivity: Select motion detection sensitivity level All On: Activate motion detection in all area. All Off: Deactivate motion detection in all area. 4) Alarm Out There are 3 alarm trigger types such as sensor input, motion detection and video loss. This setting is related to which trigger will activate the action such as Relay, Popup, and Buzzer Alarm Out.
HT SERIES DVR USER GUIDE 8/16CH alarm out OSD page Duration Time vary from 5 seconds to 60 seconds Sensor Type: Selectable option is N.O. (Normally Open) / N.C.
HT SERIES DVR USER GUIDE 5) PTZ Configure Pan/Tilt/Zoom camera for control via DVR System and Remote client software Driver: Select correct protocol for DVR unit to communicate with PTZ cameras. Please contact PTZ camera manufacturer to find out the correct default protocol. Driver Baudrate PELCO D type 9600~2400 PELCO P type 2400 PANASONIC 2400~19200 ORIENTAL 2400(Fixed) LPT-A100L 9600(Fixed) LG-SD110 2400~19200 6) Controller Setup the ID of remote control.
HT SERIES DVR USER GUIDE 3-2-4. NETWORK Configure and view Status, Address, Port, DDNS, E-mail settings 1) Address Configure Network information for Remote client connection DVR Name: Assigned a title for the DVR unit. Type: Choose Ethernet network environment. DHCP: Set to use DHCP or not (On/Off). Note: Please consult your network administrator for DHCP support.
HT SERIES DVR USER GUIDE 3) DDNS DVR unit supports the automatic DDNS service using DYNDNS server. 4) Status Display network information such as how many connections and what is the action of each connection. This allows user to have better security management. Connected IP: Display all remote login IP address. Watch User: Display number of connections for live viewing. Search User: Display number of connections for playback. Setup User: Display number of connections for DVR setup.
HT SERIES DVR USER GUIDE 5) E-mail E-mail ON: Enable / Disable event E-mail notification function To: Recipient Email address From: Sender Email address Port: SMTP server port Authentication: Check if SMTP server requires Authenticate Sender information SSL: Check if SMTP server requires SSL Account: Sender email login ID Password: Sender email login password Duration: Set sends e-mail duration when event triggered E-mail Test: Send testing e-mail to recipient Email address Event Set: Set event e-mail type
HT SERIES DVR USER GUIDE 3-2-5. SYSTEM Configure and view system Date/Time, User Authority, Storage, System Log, Firmware settings 1) Date/Time Time Zone: Setup current time zone. This must be set correctly if you using the NTP function. Daylight Saving Time: Enable day light saving time automatically. NTP (Network Time Protocol) Server: This function is to change the time of DVR automatically via network.
HT SERIES DVR USER GUIDE Camera: Setup which cameras are allowed to view for login user 3) Storage Storage 1: Display the information and usage of the hard disk drives. NOTE: Press ‘Format’ button on each HDD will only format that particular HDD. Total: Display Total HDDs being used for the product. NOTE: Press ‘Format’ button on here will format all HDDs drive. HDD Overwrite: Enable when user wants to continue recording if HDD is full. Auto Deletion: Select the holding period of the data(1 day~3 month).
HT SERIES DVR USER GUIDE 4) S.M.A.R.T S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology). It was created to monitor the disk status. S.M.A.R.T: Check Day: Set HDD checking data Boot message: Set alarm output condition for boot error Temperature: Check time: Set the duration time to check HDD temperature Limit: Set alarm output condition of HDD temperature Alarm out: Set the alarm output method for S.M.A.R.T S.M.A.R.
HT SERIES DVR USER GUIDE 6) Firmware Allow user to view current DVR unit firmware version, upgrading firmware, Export or Import and Default DVR Configuration. Upgrade Steps: 1. Copy the upgrade file to the USB pen drive(file will be:xxxxx.fwr format) 2. Connect USB pen drive to the DVR unit front panel 3. Enter menusystemfirmware page and press “Upgrade” button, then select upgrade file from USB pen drive. Note: The Upgrade process takes 6~10 minute.
HT SERIES DVR USER GUIDE 3-3 Search mode Search mode consists two different modes of searching. The video data can be searched by Time or Event. 3-3-1. Search Selection Type 1) Time Based search selection 1. Select the date you wish to view by selecting a Date from Calendar 2. Select the time you wish to view by selecting a time from Time Line, or click “ + “ or “ - “ to get detailed time line 3. Preview panel above the time bar will show the preview of the selected video 4.
HT SERIES DVR USER GUIDE Backup: Backup recorded data to external USB device Select backup period, channels and press “Estimation” to calculate file size. Press “start “to start backup recording data Play: Load playback data to full screen mode. Exit: Exit to Live video mode Backup player: While making backup, the player program will be written into the USB stick as well 2) Event Based Search Selection 1. Select search date from calendar 2.
HT SERIES DVR USER GUIDE 3-3-2. Play Mode 1 2 3 45 67 8 1. Split Screen 2. Sequence 3. FB (Fast Rewind): ×2, 4, 8, 16, 32, 64 times faster 4. Playback: Rewind in normal speed 5. SB (Slow Rewind): x1/2, 1/4 6. STILL (Pause) / play Frame by frame 7. SF (Slow Forward): x1/2, 1/4 8. Play: Forward in normal speed 9. FF (Fast Forward): FF×2, 4, 8, 16, 32, 64 times faster 10. Stop: Stop playing and returns to LIVE Screen. 11.
HT SERIES DVR USER GUIDE 4. Remote software This Remote Client software program allows user to connect and operate the DVR unit from any place over internet via PC. CLIENT PC REQUIREMENT CPU and VGA are critical for playing recorded file and recording performance. Therefore, user must use the recommended PC hardware to avoid experiencing low image quality or unable to view live image issue. ※ Client S/W requires large amount of CPU to send and receive data.
HT SERIES DVR USER GUIDE 4-1. Installing Client Program 1. Execute the software on CD 2. Select destination folder to install the program 3.
HT SERIES DVR USER GUIDE 4-2. How to Use remote Program Execute the client software and followed by correct password (default is null). 1. Display panel to show live and playback images 2. Setting button: Password Setup: Allow user to change the password settings. Start – Require password input when remote software startup. Setting – Require password input in order to enter system setup. Dialog – If you choose the ‘Dialog’, You can set the DVR using dialog windows.
HT SERIES DVR USER GUIDE 3). WATCH MODE : Live screen. FAVORITE MODE : Connect to multiple DVR (up to 64) SEARCH MODE : Playback Screen SETUP MODE : Setup the connected DVR Connect or Disconnect the connected DVR 4). Favorite: User may use this feature to setup a list of IP Addresses which frequently use for your convenient use. Site: Display the DVR list you want connect. Add: Add new IP Address. Edit: Edit IP Addresses and other connection information on the list. Delete: Remove saved list.
HT SERIES DVR USER GUIDE 4-2-1 Display & PTZ Control: Allow user to display and control the PTZ cameras. 1. Channel selection 2. Display mode selection 3. PTZ control: Control the PTZ camera. 4. Snap Shot: Save a snapshot with JPG or BMP format. Refer to 5-2-6. 5. Option: Enter setup setting. OSD Option: Turn OSD On/Off on live viewing. Favorite Mode Max Fps: Adjust the maximum frame rate individually upon ‘Favorite’ connection.
HT SERIES DVR USER GUIDE 5). Display the network speed and frame rates per channel. Site mode – Send up to 7.5 frames per second on 16 channel screen in Watch mode and 30 frames per second on 1channel screen. Favorite mode – Send 30 frames per second in each channel. However, it is depend on the network speed and PC computing power. 6). Select ‘EVENT’ to display all event logs. Select ‘SYSTEM’ to display all system logs. EVENT Log: Display motion detection, sensor, text in etc.
HT SERIES DVR USER GUIDE 4-3. Site - Connecting the DVR Click ‘Add’ button at lower right corner on initial screen to add DVRs. Group: Setup group of DVRs. User can choose either the existing group or create a new DVR Group with ‘New’ button. Name: Create the name of the DVR. IP Address: Set the IP address of DVR. Port: Set the port number of DVR. Num Channel: Set numbers of exact DVR channels what you want to register. ID: Enter user ID. Password: Enter DVR password.
HT SERIES DVR USER GUIDE 4-4. Favorite – multiple DVR connection In Favorite Mode, User can make the favorite multiple connection lists by pressing the ‘Add’ button or dragging from the ‘Site’ lists. If you press the ‘Add’ button in Favorite Mode, the upper window will appear. The left side of the window shows the DVR list what you registered in site menu and the right side of the window shows the Favorite list which you want to edit.
HT SERIES DVR USER GUIDE mode. You can register the DVR or individual channel to the Favorite list directly not to make the list. You can just drag and drop the wanted DVR or channel from the right window to the wanted left channel. It will automatically connect to the selected DVR or channel. If you click the mouse right button from the upper screen and select the ‘Add To Favo List’, the favorite editing window appears and you can add the new connection to the list.
HT SERIES DVR USER GUIDE 4-5 SEARCH – Playback User will enter playback mode by choosing ‘SEARCH’ button after connection. After selecting ‘Control’ button, control panel will appear as below: 1. Channel and display mode selection 2. Playback speed control buttons Go to the previous image Pause playback Normal playback Go to the next image Fast rewind. (1x, 2x, 4x, 8x,16x, 32x, 64x faster) Rewind slowly.(1/2x,1/4x slower) Forward slowly.(1/2x,1/4x slower) Fast forward.
HT SERIES DVR USER GUIDE 5. Time Search: Go to the specific time directly. 6. : Update all information. : Backup image into PC To backup, select From and To time, channels and click ‘Start’ to begin. It will start sending the file to the PC and all information be displayed. After sending the file, choose the filename and folder. : Capture Live or Playback image. Zoom In: Allow user to enlarge the image up to 4 times. (Left click and hold the mouse button in order to move the image around.
HT SERIES DVR USER GUIDE Close : Close Image Dialog window. : Modify remote software settings. OSD Option: Turn the OSD On/Off on live viewing. Favorite Mode Max Fps: Adjust maximum frame rate individually upon ‘Favorite’ connection. If ‘AUTO’ is selected, the program will decide the optimum rates based on the PC and network speed. Search Option : Modify the search option.
HT SERIES DVR USER GUIDE 4-6 SETUP – DVR Remote Setup User can modify the preferences of the DVR unit remotely. Click ‘SETUP’ button to set up the DVR remotely and user will see the identical setup GUI of the DVR.
HT SERIES DVR USER GUIDE 4-7 Web Browser Monitoring and Playback DVR unit allows user to remote viewing via IE browser. After typing the IP or domain address at the address bar in IE browser, please enter the user ID (admin or user) and Password for the DVR unit. Hit “ to begin remote viewing or hit “ ” button “ button to playback image.
HT SERIES DVR USER GUIDE 4-8 Mobile Phone Viewing DVR system allows user to view live image via 3G mobile phone. 1. Enter DVR IP address on the mobile phone browser with http:// ip address :port /mobile.html format. For example:http://122.147.154.249:8001/mobile.html , which 8001 is referred to DVR web port 2. Enter DVR system ID and Password. Select camera channel and hit “Login”. 3. Please allow 3~5 second for Mobile phone to buffer the image. NOTE: 1.
HT SERIES DVR USER GUIDE 4-9 Network Firmware Upgrade After installing the client software, you can find the ‘NetDownloader Program’ in the window programs (Start -> Programs -> DVR Client -> NetDownLoader). Please execute the ‘Net Downloader Program’ to upgrade the DVR firmware. After entering the IP and password of the DVR, click ‘Connect’ button to communicate with your DVR unit. You can check the model name and the current version.
HT SERIES DVR USER GUIDE After connection established, click ‘OPEN’ button on the ‘NetDownloader’ program and select the update file. Press ‘START’ button to begin the process. You will see the below download window on the DVR screen. ☞ WARNING!!! DO NOT INTERRUPT THE DOWNLOAD PROCEDURE. IT WILL DAMAGE THE DVR UNIT IF FAIL TO DO SO. ※ DVR WILL REBOOT AUTOMATICALLY AFTER DOWNLOAD COMPLETED.
HT SERIES DVR USER GUIDE APPENDIX A DDNS SETUP 1. Registering DDNS (Dynamic Domain Name Server) in Dyndns.com A. Register your DDNS host in Dyndns website ( http://www.dyndns.
HT SERIES DVR USER GUIDE Create your user information.
HT SERIES DVR USER GUIDE You will see this confirmation page B.
HT SERIES DVR USER GUIDE C. Add Host Name Click “Add Host Services” to add a HOST name 1 2 3 1) Create your preferred name of your Hostname. Note: Hostname can be difference from your Dyndns account user name. It is recommended to use the 'dyndns.org' as extension. 2) Click the 'Use auto detected IP address XX.XX.XXX.XXX' and you will see your WAN IP appear in the column. 3) Click 'Create Host' button to proceed.
HT SERIES DVR USER GUIDE Your Hostname 'XXXXXX.dyndns.org' had been created successfully. 2. DDNS Settings A. Go to DVR SETUPNETWORKDDNS. B. Select DDNS Type as DynDNS. Domain Name: Input your registered domain name in Dyndns website. (ex:test.dvrdns.org) ID / DDNS Password: Same as register in dyndns web page Press Apply and OK button to save changes.
HT SERIES DVR USER GUIDE 3. Connect with Remote Software or IE Browser Note : 8001 is referred to web port.
HT SERIES DVR USER GUIDE APPENDIX B HDD COMPATIBLE TABLE Model Name HITACHI MAXTOR SAMSUNG WESTERN DIGITAL Capacity Buffer HDS728080PLAT20 80 GB 2M HDS721680PLAT80 80 GB 8M HDT722516DLAT80 160 GB 8M HDS722516DLAT80 160 GB 8M HDT722525DLAT80 250 GB 8M HDT725025VLAT80 250 GB 8M HDS722525VLAT80 250 GB 8M HDT725032VLAT80 320 GB 8M HDP725050GLAT80 500 GB 8M HDS725050KLAT80 500 GB 8M HDP72505DGLA360 500GB 16M HDS721010KLA330 1TB 32MB 6Y080L0 80 GB 2M 6B160P0 160 GB
HT SERIES DVR USER GUIDE SEAGATE ST3160815AS(Barracuda) 160 GB 8M ST3160815AV 160 GB 8M ST3250820AV(Surveillance) 250 GB 8M ST3250820ACE(Barracuda) 250 GB 8M ST3250410AS(Barracuda) 250 GB 16 M ST3300831ACE 300 GB 8M ST3300820ACE 300 GB 8M ST3300831ACE 300 GB 16 M ST3400832ACE 400 GB 8M ST3400820ACE 400 GB 8M ST3400620A 400 GB 16 M ST3500630AV(Surveillance) 500 GB 16 M ST3500630A 500 GB 16 M HDS725050KLAT80 500 GB 8M ST3750840ACE 750 GB 8M ST3750640A 750 GB 16
HT SERIES DVR USER GUIDE APPENDIX C TROUBLESHOOTING 1). Why DVR cannot be powered up? ANS: Please make sure the power adapter and power cable are properly connected. If both checked, replace another power adapter. 2). There is no image on monitor ANS: Please make sure the monitor is ON. For 4CH model, video output switch needs to be flipped to correct output. 3). Why can’t I connect to DVR with Client Program or web browser? ANS: Please make sure the DVR unit is connected the network.
HT SERIES DVR USER GUIDE APPENDIX. D Connection Port For remote site connection, program using some port to transmit data. User can finf port setting as below page If using same level networking, you don’t need to care about it. But for the other, like Real-IP and Virtual-IP connection, or PC with firewall, you have to know something about it. In case of Remote site with Virtual-IP, you have to find out the IP-mapping at router(NAT).
HT SERIES DVR USER GUIDE 1. Using NAPT, setup the port which you want to use at remote PC. Remote’s IP address Type and port number 2. Use Host Mapping, for all of the port to remote PC.
