Operating Guide

Take command of
your kitchen with a
voice-activated faucet
that works smarter.
BEFORE YOU BEGIN. NOW, LET’S GET STARTED.
STEP 1: Turn o your
water supply.
STEP 2: Remove the plastic
clip from the bottom of your
existing solenoid.
STEP 3: Remove the hose by
gently pulling it downward.
STEP 4: Slide the new VoiceIQ™
Module unit onto the bottom of
your existing solenoid.
If you need installation or troubleshooting assistance,
visit DeltaFaucet.com/VoiceIQ.
These instructions begin with an installed Delta Touch
2
0® faucet
*
. If you
have not installed your faucet yet, please follow the instructions for faucet
installation prior to installing your Delta VoiceIQ™ Module. You will also
need a smartphone or tablet and the following to complete the set-up:
Before you begin, remove the batteries from the battery pack of
your Delta Touch
2
O® faucet.
A POWER SOURCE.
Under the sink. Not
controlled by a switch.
A CONNECTED
HOME DEVICE.
Amazon® Alexa® or
Google® Assistant.
A HOME WI-FI SYSTEM.
And your login
information.
1 32 4
* manufactured after 01/01/18
STEP 5: Swivel the retainer clip
upward and click it into place.
STEP 6: Slide the hose onto the
VoiceIQ™ Module and secure it
with the retaining clip.
5 6
STEP 7: Connect the ethernet
cable to the VoiceIQ™ Module
and the existing solenoid.
STEP 8: Connect the power supply to
the solenoid and to an outlet that is
not controlled by a switch. Reinstall
Touch
2
0® solenoid batteries.* Turn on
water supply and continue set up.
7 8
* in case of power outage, touch activation
will revert to battery power.