E Digital Camera EX-P505 User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/.
INTRODUCTION INTRODUCTION Unpacking Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible. ON/OF F Camera Strap Rechargeable Lithium Ion Battery (NP-40) CD-ROMs (2) Lens cap/cap holder USB Cable Lens hood AV Cable Basic Reference * The shape of the AC power cord plug varies according to country or geographic area.
INTRODUCTION 22 Contents GETTING READY About This Manual ..................................................... 22 2 INTRODUCTION General Guide ............................................................ 23 Using the Monitor Screen .......................................... 26 Unpacking .................................................................... 2 Monitor Screen Contents ........................................... 28 Features ...............................................................
INTRODUCTION 59 BASIC IMAGE RECORDING 80 Recording an Image ................................................... 59 Specifying the Recording Mode Aiming the Camera Recording an Image Selecting the Focus Mode ......................................... 80 59 61 62 Using Using Using Using Using Using Using Zoom ................................................................
INTRODUCTION 130 Instant Movie Setups (MOVIE BEST SHOT Mode) ..................................... 111 Creating Your Own MOVIE BEST SHOT Setup 112 Basic Playback Operation ........................................ 130 Playing an Audio Snapshot Recording Audio ........................................................ 114 Adding Audio to a Snapshot PLAYBACK 131 114 Zooming the Display Image ..................................... 132 Using the Histogram .................................................
INTRODUCTION 154 FILE MANAGEMENT 166 Folders ..................................................................... 154 Memory Folders and Files Using a Memory Card .............................................. 167 154 To insert a memory card into the camera To replace the memory card Formatting a Memory Card Protecting Files ........................................................
INTRODUCTION 219 Using a Memory Card to Transfer Images to a Computer .................................................................. 196 Menu Reference ....................................................... 219 Memory Data ............................................................ 197 DCF Protocol Memory Folder Structure Image Files Supported by the Camera 200 197 197 199 Indicator Lamp Reference ....................................... 221 Troubleshooting Guide ................................
INTRODUCTION • Macintosh is a registered trademark of Apple Computer, Inc. • MultiMediaCard is a trademark of Infineon Technologies AG of Germany, and licensed to the MultiMediaCard Association (MMCA). • Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • Ulead is a trademark of Ulead Systems, Inc. • Other company, product and service names used herein may also be trademarks or service marks of others.
INTRODUCTION ■ LCD Panel The LCD panel is a product of the latest LCD manufacturing technology that provides a pixel yield of 99.99%. This means that less than 0.01% of the total pixels are defective (they do not turn on or always remain turned on). Features • 5.0 million effective pixels The CCD provides 5.25 million total pixels of very highresolution for crisp, clear, prints and display images. • 2.
INTRODUCTION • Triple Self-timer (page 75) The self-timer can be set up to repeat three times, automatically. • Ex Finder view (page 32) The Ex Finder view provides you with a wealth of information on the monitor screen as you compose your images. • Real-time RGB histogram (page 116) An on-screen histogram lets you adjust exposure as you view the effect on overall image brightness, which makes shooting under difficult lighting conditions easier than ever before.
INTRODUCTION • Digital Print Order Format (DPOF) (page 174) Images can be printed easily in the sequence you want using a DPOF compatible printer. DPOF can also be used when specifying images and quantities for printing by professional print services. • Ulead Movie Wizard SE VCD (page 212) Bundled Ulead Movie Wizard SE VCD software lets you edit movie files on your computer and create Video CDs. Software can be upgraded to convert files so they can be played by a DVD player.
INTRODUCTION • Never fire the flash while it is too close to the subject’s eyes. Intense light from the flash can cause eye damage if it is fired too close to the eyes. This is especially true with young children. When using the flash, the camera should be at least one meter (3.3´) from the eyes of the subject. • Keep the camera away from water and other liquids, and never let it get wet. Moisture creates the risk of fire and electric shock.
INTRODUCTION • Never open the battery cover, disconnect the AC adaptor from the camera, or unplug the AC adaptor from the wall socket while an image is being recorded. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored in file memory. • Never use the AC adaptor to power any other device besides this camera. Never use any other AC adaptor besides the one that comes with this camera.
INTRODUCTION ■ Test for proper operation before using the camera! Any of the above conditions can cause an error message to appear on the monitor screen (page 229). Follow the instructions provided by the message to eliminate the cause of the error. Before using the camera to record important images, make sure you first record a number of test images and check the results to ensure that the camera is configured correctly and operating properly.
INTRODUCTION ■ Condensation ■ Lens • When you bring the camera indoors on a cold day or otherwise expose it to a sudden change of temperature, there is the possibility that condensation can form on the exterior or on interior components. Condensation can cause malfunction of the camera, so you should avoid exposing it to conditions that might cause condensation.
QUICK START GUIDE QUICK START GUIDE First, charge the battery! 1. Charge the rechargeable lithium ion battery (NP-40) 1 that comes with the camera (page 37). • Note that the shape of the rapid charger depends on the area where you purchased the camera. • It takes about two hours to achieve a full charge. 1 2 2 [CHARGE] lamp lights red during charging. [CHARGE] lamp turns green when charging is complete. [CHARGE] lamp lights red during charging. [CHARGE] lamp turns green when charging is complete.
QUICK START GUIDE 2. Load the battery into the camera (page 42).
QUICK START GUIDE To configure display language and clock settings • Be sure to configure the following settings before using the camera to record images. See page 56 for details. 1. Open the monitor screen to turn on the camera. • You can also turn on the camera by pressing the power button. 2. Press [왖] to select the language you want. 3. Press [SET] to register the language setting. 1 1 4. Use [왖], [왔], [왗], and [왘] to select the geographical area you want, and then press [SET]. 5.
QUICK START GUIDE To record an image See page 59 for details. Before using a commercially available memory card, be sure to first format it using the camera’s formatting procedure. For details about formatting a memory card, see page 169. 1. Remove the lens cap from the lens. 2. Open the monitor screen to turn on the camera. 1 • You can also turn on the camera by pressing the power button. 3. Align the mode dial with “ Snapshot mode icon 3 2560 1920N + – + 0.0 05/ 12/24 05/12 24 12:38 12 38 3 4.
QUICK START GUIDE To view a recorded image To delete an image See page 130 or details. 1 See page 152 or details. 1 1 1 2 2 3, 4, 5, 6 3 1. Open the monitor screen to turn on the camera. • You can also turn on the camera by pressing the power button. 2. Align the mode dial with “ (PLAY mode). 3. Use [왗] and [왘] to scroll through the images. ” 1. Open the monitor screen to turn on the camera. • You can also turn on the camera by pressing the power button. 2.
QUICK START GUIDE To turn off the camera See page 51 or details. 1 1 1. Position the monitor screen inwards to turn off the camera. • You can also turn off the camera by pressing the power button.
GETTING READY GETTING READY This section contains information about things you need to know about and do before trying to use the camera. This term as used in this manual: Means this: “a REC mode” The currently selected recording mode (Snapshot, BEST SHOT, Aperture Priority AE, Shutter Speed Priority AE, Manual Exposure, Movie, Short Movie, Past Movie, MOVIE BEST SHOT) “digital noise” Tiny flecks or “snow” in a recorded image or on the monitor screen, which makes the image look grainy.
GETTING READY ■ Supplementary Information General Guide • IMPORTANT! indicates very important information you need to know in order to use the camera correctly. • NOTE indicates information that is useful when operating the camera. The following illustrations show the names of each component, button, and switch on the camera.
GETTING READY ■ Back 8 Operation lamp 9 Mode dial 8 9 ON/OFF SET DISP E D 0 A B C : PLAY mode : Snapshot mode : BEST SHOT mode : Aperture Priority AE mode : Shutter Speed Priority AE mode : Manual Exposure mode : Past Movie mode : Short Movie mode : MOVIE BEST SHOT mode : Movie mode 0 Strap ring A [MENU] button B [SET] button C [DISP] button D [ ][ ][ ][ ] E Monitor Screen 24 REC modes
GETTING READY ■ Side ■ Bottom H F [ ](Focus) button G [EX] button H [ ](Flash) button F G I ON /OFF J K I Flash J [DC IN 4.5V] M N M Battery cover N Tripod screw hole (AC adaptor connector) K [USB/AV] (USB/AV port) L Terminal panel cover • Use this hole when attaching to a tripod.
GETTING READY 1 180 degrees left and right Using the Monitor Screen You can position the monitor screen to suit your shooting or viewing conditions. Opening the monitor screen automatically turns on the camera. IMPORTANT! 180˚ • When changing the position of the monitor screen, grasp the screen on its top and bottom edges. Take care you do not touch the liquid crystal panel. Also make sure you never try to force the monitor screen to move past its normal range of movement.
GETTING READY • Positioning the monitor screen so it is facing the same direction as the lens causes the recorded image to be flipped into a mirror image automatically. This makes it possible to compose a self-portrait with the monitor screen. • Position the monitor screen inwards to turn off the camera. NOTE • You can also turn the camera on and off with the power button (page 51). • Position the monitor screen outwards to use it for composing images.
GETTING READY Monitor Screen Contents The monitor screen uses various indicators and icons to keep you informed of the camera’s status. • Note that the example screens in this chapter are for illustrative purposes only. They do not exactly match the screen contents actually produced on the camera.
GETTING READY 7• Snapshots: Image size (page 77) 2560 × 1920 pixels 2560 × 1712 (3:2) pixels 2048 × 1536 pixels 1600 × 1200 pixels 1280 × 960 pixels 640 × 480 pixels • Movies: Recording time (page 106) 0 Date and time (page 159) NOTE • Changing the setting of any one of the following functions will cause Icon Help text to appear on the monitor screen. You can turn off Icon Help if you want (page 124).
GETTING READY ■ Exposure Panel D The exposure panel is an area in the lower right corner of the REC modes monitor screen that shows various adjustable parameters. You can also use the exposure panel to adjust exposure settings. E F G H I Exposure Panel D Digital zoom indicator (page 67) E ISO sensitivity (page 119) F ND filter (page 90) • The following explains the items that appear on the exposure panel. Note that the current REC mode determines which items appear.
GETTING READY 2 Aperture value (pages 63, 94) Use this item to adjust the aperture. • The aperture value is displayed in the exposure panel when the mode dial is set to “A” (aperture priority AE) or “M” (manual exposure). 4 EV shift (exposure compensation value) (page 88) Use this item to adjust the exposure compensation (EV shift) value. • The EV shift value appears in the exposure panel when the mode dial is set to “A” (aperture priority AE) or “S” (shutter speed priority AE).
GETTING READY ■ Ex Finder View 7 Manual focus icon 45 • This icon is displayed only when “MF (Manual Focus)” is selected as the focus mode. • If you use [ ] and [ ] to move the cursor to “ ” and then press [ ] or [ ], the Ex Finder view will disappear and the manual focus position indicator (page 86) will appear. After a few moments, the Ex Finder view will reappear. 8 Color change icon • Use [ ] and [ ] to move the cursor to “ ” and then press [ ] or [ ] to change the color of the Ex Finder view.
GETTING READY 4• PLAY Mode 12 3 Snapshots: Image quality (page 79) F : Fine N : Normal E : Economy 0 White balance indicator (page 91) AWB Daylight 5• Snapshots: Image Size (page 77) 2560 × 1920 pixels 2560 × 1712 (3:2) pixels 2048 × 1536 pixels 1600 × 1200 pixels 1280 × 960 pixels 640 × 480 pixels • Movies: Image quality (page 105) HQ : High Quality NORMAL : Normal LP : Long Play 4 5 6 7 8 9 F E D C 1 PLAY mode file type Snapshot Movie Past Movie Short Movie MOVIE BEST SHOT Audio Snapshot BA 0
GETTING READY B Recording mode Changing the Contents of the Monitor Screen (page 59) Snapshot Each press of the [DISP] button changes the contents of the monitor screen as shown below.
GETTING READY ■ PLAY Mode IMPORTANT! • The Ex Finder view cannot be displayed in the following modes: PLAY, Movie, Past Movie, Short Movie, MOVIE BEST SHOT. • Pressing [DISP] will not change monitor screen contents during movie recording, or during standby or recording of an audio snapshot.
GETTING READY IMPORTANT! Attaching the Strap • To avoid dropping the camera while operating it, be sure to wear the strap around your wrist. Use the buckle to ensure that the strap is fastened snugly around your wrist. • The supplied strap is intended for use with this camera only. Do not use it for any other purpose. • Never swing the camera around by the strap. Attach the strap to the strap ring as shown in the illustration.
GETTING READY Using the Lens Cap Power Requirements Always keep the lens cap on the lens whenever you are not using the camera. Cap holder Your camera can operate on either battery power or AC power. • Battery One NP-40 rechargeable lithium ion battery Small loop The battery is not fully charged when you use the camera for the first time after purchasing it. You need to charge the battery before using the camera for the first time.
GETTING READY ■ Loading the Battery into the Rapid Charger ■ To charge the battery Making sure that the positive and negative contacts are aligned correctly, load the battery into the rapid charger. Note that the battery will not charge properly if it is not positioned correctly in the rapid charger. 1. Correctly positioning the positive and negative terminals of the battery, load the battery into the rapid charger.
GETTING READY 2. Plug the rapid charger into a household NOTE power outlet. • The power cord type rapid charger is designed for operation with any power supply in the range of 100V to 240V AC. Note, however, that the shape of the AC power cord plug varies according to country or geographic area.
GETTING READY 3. The [CHARGE] lamp turns green when charging is complete. 4. After charging is complete, unplug the rapid charger from the power outlet, and remove the battery from it. Plug • Always unplug the rapid charger from the power outlet and remove the battery whenever you are not charging. [CHARGE] lamp Rapid Charger NOTE • The plug-in type rapid charger is designed for operation on power ranging from 100V AC to 240V AC.
GETTING READY IMPORTANT! • Charging the battery may cause interference with TV and radio reception. If this happens, plug the charger into an outlet that is further away from the TV or radio. • Dirty charger contacts and/or battery terminals can make proper charging impossible. Be sure to wipe contacts and terminals occasionally with a dry cloth to keep them clean.
GETTING READY 2. Aligning the ( ) marks on the camera and To load the battery battery as shown in the illustration, press down on the stopper in the direction indicated by the arrow and slide the battery into the camera. 1. Slide the battery cover on the bottom of the camera in the direction indicated by the arrow, and then swing it open. Stopper NP-40 ( ) marks • Push the bottom of the battery, and make sure that the stopper securely locks the battery in place.
GETTING READY ■ If the camera does not work normally 3. Swing the battery cover closed, and then slide it in the direction indicated by the arrow. This can mean there is a problem with how the battery is loaded. Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth. IMPORTANT! • Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported.
GETTING READY ■ Battery Life Guidelines Supported Battery: NP-40 Storage Medium: SD Memory Card The battery life guideline values given below indicate the amount of time under the conditions defined below the table, until power automatically turns off due to battery failure. They do not guarantee that the battery will provide the amount of service indicated. Low temperatures and continued use reduce battery life.
GETTING READY ■ Low Battery Indicator • The above values are based on a new battery starting from a full charge. Repeated charging shortens battery life. • Battery life is greatly affected by how much you use flash, zoom and auto focus, and how long you leave power turned on. The following shows how the battery capacity indicator on the monitor screen changes as battery power is used. The indicator means that remaining battery power is low.
GETTING READY To replace the battery Power Supply Precautions 1. Open the battery cover. Note the following precautions when handling or using the battery and the rapid charger. 2. Press down on the stopper in the direction ■ Battery Handling Precautions indicated by the arrow. ● SAFETY PRECAUTIONS Be sure to read the following Safety Precautions before using the battery for the first time. • This will cause the battery to come part way out of the slot.
GETTING READY • Should you ever notice any of the following conditions while using, charging, or storing a battery, immediately remove it from the camera or rapid charger, and keep it away from open flame: — Fluid leaking — Emission of a strange odor — Heat emission — Battery discoloration — Battery deformation — Any other battery abnormality • If the battery does not achieve full charge after the normal charging time has passed, stop charging.
GETTING READY ● BATTERY STORAGE PRECAUTIONS ● PRECAUTIONS DURING USE • Make sure you remove the battery from the camera when you do not plan to use it for a long time. A battery left in the camera discharges very small amounts of power even when power is turned off, which can lead to a dead battery or the need for longer charging before the next use. • Store the battery in a cool, dry place (20°C (68 °F) or lower).
GETTING READY ■ Rapid Charger Precautions Using AC Power • Never plug the rapid charger into an outlet whose voltage rating is different from that marked on the rapid charger. Doing so creates the risk of fire, malfunction, and electric shock. • Never plug in or unplug the rapid charger while your hands are wet. Doing so creates the risk of electric shock. • Do not plug the rapid charger into an outlet or extension cord that is shared by other devices.
GETTING READY ■ Using AC Adaptor In Another Geographic Area 3. Plug the AC power cord into an electrical outlet. • The AC adaptor can be used with any power source rated from 100V to 240V AC. If you plan to use the AC adaptor in another country, it is up to you to purchase the applicable AC power cord that matches the configuration of power receptacles in that country. [DC IN 4.
GETTING READY ■ AC Adaptor Precautions Turning the Camera On and Off • Be sure to turn off power before connecting or disconnecting the AC adaptor. • Always turn camera power off before disconnecting the AC adaptor, even if the camera has a battery installed. If you don’t, the camera will turn off automatically when you disconnect the AC adaptor. You also run the risk of damaging the camera whenever you disconnect the AC adaptor without first turning power off.
GETTING READY ● See “Using the On-screen Menus” (page 53) for information about how to use menus. Configuring Power Saving Settings You can configure the settings described below to conserve battery power. Sleep : Automatically turns off the monitor screen if no operation is performed for a specified amount of time in a REC mode. Performing any button operation causes the monitor screen to turn back on. Auto Power Off : Turns off power if you do not perform any operation for a specified amount of time.
GETTING READY • The Auto Power Off and Sleep features are disabled in the following cases. Using the On-screen Menus Pressing [MENU] displays menus on the monitor screen that you can use to perform various operations. The menu that appears depends on whether you are in a REC mode or the PLAY mode. The following shows an example menu procedure in the Snapshot mode.
GETTING READY 2. Press [MENU]. Tab [MENU] SET [ ][ ][ ][ ] ● Menu Screen Operations Selection cursor (indicates the currently selected item) [SET] Settings 54 When you want to do this: Do this: Move between tabs Press [ ] and [ ]. Move from the tab to the settings Press [ ]. Move from the settings to the tab Press [ ]. Move between the settings Press [ ] and [ ]. Display the options available for a setting Press [ ] or press [SET]. Select an option Press [ ] and [ ].
GETTING READY 3. Press [ ] or [ ] to select the tab you want, 6. Perform one of the following operations to and then press [SET] to move the selection cursor from the tab to the settings. apply the setting you configured. 4. Use [ ] and [ ] to select the feature whose setting you want to configure, and then press [ ]. • Instead of pressing [ ], you could also press [SET]. Example: To select the “Self-timer” item. To do this: Perform this key operation: Apply the setting and exit the menu screen.
GETTING READY • A built-in backup battery retains the date and time settings of the camera for about two days if the camera is not supplied with power. Date and time settings will be cleared when the backup battery goes dead. The following are the conditions when power is not being supplied to the camera.
GETTING READY 3. Use [ ], [ ], [ ], and To configure display language and clock settings [ ] to select the geographical area where you live, and then press [SET]. 1. Open the monitor screen to turn on the camera. • You can also turn on the camera by pressing the power button. 4. Use [ ] and [ ] to 2. Use [ ], [ ], [ ], and select the name of the city where you live, and then press [SET]. [ ] to select the language you want, and then press [SET]. : Japanese English : English 5.
GETTING READY 6. Use [ ] and [ ] to 7. Set the current date select the date format setting you want, and then press [SET]. and the time. Example: December 24, 2005 To display the date like this: Select this format: 05/12/24 YY/MM/DD 24/12/05 DD/MM/YY 12/24/05 MM/DD/YY To do this: Do this: Change the setting at the current cursor location Press [ ] and [ ]. Move the cursor between settings Press [ ] and [ ]. Toggle between 12-hour and 24hour timekeeping Press [DISP]. 8.
BASIC IMAGE RECORDING BASIC IMAGE RECORDING This section describes the basic procedure for recording an image. Recording an Image • (Snapshot mode) Use this mode to record still images. This is the mode you should normally use for image recording. • (BEST SHOT mode) This mode makes camera setup as easy as selecting the applicable sample scene. Simply select one of 22 sample scenes, and the camera will automatically be configured with the settings required to record a similar image (page 100).
BASIC IMAGE RECORDING • • • (Short Movie mode) Each press of the shutter button in this mode records a short movie that starts before the button is pressed and ends after the button is pressed (page 108). NOTE • The icon of the currently selected recording mode (like for the Snapshot mode) is displayed on the monitor screen. (MOVIE BEST SHOT mode) This mode makes camera setup as easy as selecting the applicable sample scene.
BASIC IMAGE RECORDING IMPORTANT! Aiming the Camera • Make sure your fingers and the strap do not block the flash, stereo microphones or lens. Use both hands to hold the camera still when shooting an image. Holding the camera with one hand increases the chance of movement, which can blur your images. • Horizontal Flash Hold the camera still in both hands, with your arms firmly against your sides.
BASIC IMAGE RECORDING 2. Open the monitor screen or press the power Recording an Image button to turn on the camera. Your camera automatically adjusts shutter speed in accordance with the brightness of the subject. Images you record are stored in the camera’s built-in memory, or to a memory card if you have one loaded in the camera. • When an optionally available SD memory card or MultiMediaCard (MMC) is loaded in the camera, images are stored on the card (page 166).
BASIC IMAGE RECORDING 4. Compose the image ● Operation Lamp and Focus Frame Operation 3 2560 1920N on the monitor screen so the main subject is within the focus frame. + – 0.0 05/ 12/24 05/12 24 12 : 38 • The focusing range of the camera depends on focus mode you are using (page 80). Focus frame When you see this: It means this: Green focus frame Green operation lamp The image is in focus. Red focus frame Flashing green operation lamp The image is not in focus.
BASIC IMAGE RECORDING ■ Recording Precautions *1 The size of the opening (aperture) that allows light passing through the lens to reach the CCD. A larger aperture value indicates a smaller opening for light to pass through. *2 The amount of time the shutter remains open, allowing light passing through the lens to reach the CCD. A larger shutter speed value indicates that the shutter remains open longer, which means more light reaches the CCD.
BASIC IMAGE RECORDING ■ About Auto Focus ■ About the REC Mode Monitor Screen • Proper focus may be difficult or even impossible when shooting the following types of subjects.
BASIC IMAGE RECORDING Using Zoom Your camera is equipped with two types of zoom: optical zoom and digital zoom. Normally, the camera automatically switches over to digital zoom after you reach the maximum limit for optical zoom. You can, however, configure the camera to disable digital zoom, if you want. Zoom out Optical Zoom 2. Compose the image, and then press the shutter button. The optical zoom range is 1X to 5X.
BASIC IMAGE RECORDING Digital Zoom ■ To record an image using digital zoom Digital zoom digitally enlarges the part of the image at the center of the image screen. The range of digital zoom is 5X to 40X (in combination with optical zoom). 1. In a REC mode, hold Digital zoom indicator the zoom controller towards (telephoto) / side. IMPORTANT! • This causes the zoom indicator to appear on the display.
BASIC IMAGE RECORDING 3. Release the zoom controller momentarily, and ■ To turn digital zoom on and off (telephoto) / side then slide it towards again to move the zoom pointer into the digital zoom range. 1. In a REC mode, press [MENU]. • The zoom pointer will also stop when you move the pointer back to the switch over point to re-enter the optical zoom range. Release the zoom controller and (wide angle) / side again then slide it towards to move into the optical zoom range. 3.
BASIC IMAGE RECORDING To do this: Using the Flash Have the flash fire automatically when required (Auto Flash)* Perform the following steps to select the flash mode you want to use. • The approximate effective range of the flash is shown below. Approximately 0.4 to 3.0 meters (1.3´ to 9.8´) (ISO Sensitivity: Auto) * Depends on zoom factor.
BASIC IMAGE RECORDING 2. Record the image. Flash unit IMPORTANT! • The flash unit of this camera fires a number of times when you record an image. The initial flashes are pre-flashes, which the camera uses to obtain information that it uses for exposure settings. The final flash is for recording. Make sure that you keep the camera still until the shutter releases.
BASIC IMAGE RECORDING ■ Flash On IMPORTANT! Note the following important points when using redeye reduction. • Red-eye reduction does not work unless the people in the image are looking directly at the camera during the pre-flash. Before pressing the shutter button, call out to the subjects so they all look at the camera while the pre-flash operation is performed. • Red-eye reduction may not work very well if the subjects are located far away from the camera.
BASIC IMAGE RECORDING Flash Unit Status Changing the Flash Intensity Setting You can find out the current flash unit status by pressing the shutter button half way and checking the monitor screen and operation lamp. Perform the following steps to change the flash intensity setting. 1. In a REC mode, press [MENU]. Operation lamp* 2. Use [ ] and [ ] to select the “REC” tab. 3. Use [ ] and [ ] to select “Flash Intensity”, and then press [ ]. 4.
BASIC IMAGE RECORDING 4. Use [ ] and [ ] to select “Auto”, and then Using Flash Assist press [SET]. Recording a subject that is outside the flash range can cause the subject to appear dark in the resulting image, because not enough of the flash reaches the subject. When this happens, you can use flash assist to correct the brightness of the recorded subject, so it appears as if the flash illumination was sufficient.
BASIC IMAGE RECORDING ■ Flash Precautions Flash • The flash unit may not be able to charge when camera battery power is low. If this happens, the flash will not fire properly and you will not be able to obtain the desired exposure. Be sure to charge the camera’s battery as soon as possible when power goes low. • When the flash is turned off ( ), mount the camera on a tripod to record images in an area where available lighting is dim.
BASIC IMAGE RECORDING Using the Self-timer To do this: The self-timer lets you select either a 2-second or 10second delay of the shutter release after you press the shutter button. A Triple Self-timer feature lets you perform three consecutive self-timer operations to record three images. Specify a 10-second self-timer Specify a 2-second self-timer Specify Triple Self-timer Disable the self-timer 1. In a REC mode, press [MENU].
BASIC IMAGE RECORDING 5. Record the image. 1. The camera performs a 10-second countdown and then records the first image. Self-timer lamp • When you press the shutter button, the selftimer lamp flashes and the shutter releases after the self-timer reaches the end of its countdown (about 10 seconds or two seconds). 2. The camera prepares to record the next image.
BASIC IMAGE RECORDING NOTE Specifying Image Size • The “2 sec” self-timer setting is best when shooting with a slow shutter speed, because it helps to avoid blurring of images due to hand movement. • The following functions are not available for use in combination with the self-timer. Past Movie mode, Short Movie mode • The following functions are not available for use in combination with the Triple Self-timer.
BASIC IMAGE RECORDING 4. Use [ ] and [ ] to select the setting you • The above print sizes are all approximate values when printing at a resolution of 200 dpi (dots per inch). Use a larger setting when you want to print at a higher resolution or when you plan to produce a larger size print. • Selecting the “2560 × 1712 (3:2)” image size will record images with a 3:2 (horizontal : vertical) aspect ratio, which is optimal for printing on paper with an aspect ratio of 3:2. want, and then press [SET].
BASIC IMAGE RECORDING Specifying Image Quality Compressing an image before storage can cause a deterioration of its quality. The more an image is compressed, the greater the loss of quality. The image quality setting specifies the compression ratio to be used when an image is stored in memory. You can select an image quality setting to suit your needs for higher quality or smaller file size. Note that this setting is valid for snapshots only. For information about movie image quality, see page 105.
OTHER RECORDING FUNCTIONS OTHER RECORDING FUNCTIONS Selecting the Focus Mode You can select one of five different focus modes: Auto Focus, Macro, Pan Focus, Infinity, and Manual Focus. To set up the camera to do this: Select this setting: Focus automatically (Auto Focus)*1 None Perform close-up focus (Macro) Fix the focal distance (Pan Focus)*2 1. In a REC mode, press [ ] .
OTHER RECORDING FUNCTIONS Operation lamp Using Auto Focus As its name suggests, Auto Focus focuses the image automatically. The automatic focus operation starts when you press the shutter button down half way. The following is the Auto Focus range. Range: Snapshots: 40cm to ∞ (1.3´ to ∞) Movies: 10cm to ∞ (0.3´ to ∞) • Using optical zoom causes the above ranges to change. Focus frame 1. Press [ ] to cycle through the focus mode settings until there is no focus mode indicator on the display.
OTHER RECORDING FUNCTIONS ■ Specifying the Auto Focus Area NOTE • When proper focusing is not possible because the subject is closer than the Auto Focus range, the camera automatically switches to the Macro mode range (page 84). • Whenever you perform an optical zoom operation (page 66) while recording with Auto Focus, a value will appear on the monitor screen as shown below to tell you the focusing range.
OTHER RECORDING FUNCTIONS For this type of Auto Focus area: Select this: Very limited range in the center of the screen • This setting works well with focus lock (page 87). Spot Automatic selection of the focus area where the subject closest to the camera is located • With this setting, a wide focus frame, which contains seven focus points, appears on the monitor screen first.
OTHER RECORDING FUNCTIONS IMPORTANT! Using the Macro Mode • Use of the flash along with the Macro mode can cause the light of the flash to become blocked, which can produce unwanted shadows in your image. Use the Macro mode when you need to focus on close up subjects. The following shows the approximate focus range in the Macro mode. Range: 1cm to 50cm (0.4˝ to 19.7˝) • Using optical zoom causes the above range to change. 1.
OTHER RECORDING FUNCTIONS NOTE Using Pan Focus • Whenever you perform an optical zoom operation (page 66) while recording with pan focus, a value will appear on the monitor screen as shown below to tell you the focusing range. Example: PF 0.4m - ∞ Pan Focus can be used in a movie mode (Movie, Past Movie, Short Movie, MOVIE BEST SHOT) to focus on a particular subject and record without using Auto Focus.
OTHER RECORDING FUNCTIONS 2. While watching the Using Manual Focus image on the monitor screen, use [ ] and [ ] to focus. With the Manual Focus mode, you can adjust the focus of an image manually. The following shows focus range in the Manual Focus mode. Range: 1cm (0.4˝) to infinity (∞) • Using optical zoom causes the above range to change. Manual focus position 1. Press [ ] to cycle through the focus mode settings until “ ” is shown as the focus mode indicator.
OTHER RECORDING FUNCTIONS NOTE Using Focus Lock • Whenever you perform an optical zoom operation (page 66) while recording with manual focus, a value will appear on the monitor screen as shown below to tell you the focusing range. Example: MF 1cm - ∞ Focus lock is a technique you can use to focus on a subject that is not located within the focus frame when you record an image. You can use focus lock in the Auto Focus ). mode and the Macro mode ( 1.
OTHER RECORDING FUNCTIONS 2. Keeping the shutter Main subject button pressed half way down, recompose the image as you like. Exposure Compensation (EV Shift) Exposure compensation lets you change the exposure setting (EV value) manually to adjust for the lighting of your subject. This feature helps to achieve better results when recording a backlit subject, a strongly lit subject indoors, or a subject that is against a dark background. ISO 50 F3.3 1/1000 EV Shift Range: –2.0EV to +2.
OTHER RECORDING FUNCTIONS 3. Use [왖] and [왔] to • To cancel EV Shift, adjust the value until it becomes 0.0. change the exposure compensation value, and then press [SET]. 4. Record the image. • Pressing [SET] registers the displayed value. IMPORTANT! • When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even after performing exposure compensation. EV value [왖] : Increases the EV value.
OTHER RECORDING FUNCTIONS To turn the ND filter on and off Using the Built-in ND Filter Example: M Mode (manual exposure) An ND filter reduces the amount of light entering the lens. The built-in ND filter of this camera reduces light by 2.0 Exposure Values (EV). The ND filter is available in the following modes. 1. Use [ ] and [ ] to select the ND filter value in the exposure panel, and then use [ ] and [ ] to change the setting.
OTHER RECORDING FUNCTIONS 3. Use [ ] and [ ] to select the setting you Adjusting White Balance want, and then press [SET]. The wavelengths of the light produced by various light sources (daylight, light bulb, etc.) can affect the color of a subject when it is recorded. White balance lets you make adjustments to compensate for different lighting types, so the colors of an image appear more natural.
OTHER RECORDING FUNCTIONS NOTE Configuring the White Balance Setting Manually • When “Auto” is selected for the white balance setting, the camera automatically determines the white point of the subject. Certain subject colors and light source conditions can cause problems when the camera tries to determine the white point, which makes proper white balance adjustment impossible.
OTHER RECORDING FUNCTIONS 3. Use [ ] and [ ] to • This starts the white balance adjustment procedure. The message “Complete” appears on the monitor screen after white balance adjustment is complete. select “Manual”. • This causes the object you last used to adjust manual white balance to appear on the monitor screen. If you want to use the same settings you configured during a previous manual white balance setting operation, skip step 4 and perform step 5. 5. Press [SET].
OTHER RECORDING FUNCTIONS Wide Aperture Specifying the Exposure Mode Small Aperture You can use the mode dial to select the exposure mode, which controls the aperture and shutter speed settings used during image recording. A mode : Aperture Priority AE S mode : Shutter Speed Priority AE M mode : Manual Exposure 1. Align the mode dial with “A” (Aperture Priority).
OTHER RECORDING FUNCTIONS 2. Use [ ] and [ ] to select the aperture value 3. Press the shutter button half way. (page 31) in the exposure panel, and then use [ ] and [ ] to change the setting. Aperture value* Depth of Field Wide • This causes the camera to configure shutter speed automatically in accordance with the aperture value you selected. Then it focuses the image.
OTHER RECORDING FUNCTIONS 1. Align the mode dial Using Shutter Speed Priority AE with “S” (Shutter Speed Priority). When S mode (shutter speed priority AE) is selected as the exposure mode, the camera adjusts the aperture automatically in accordance with a fixed shutter speed specified by you. You should specify a shutter speed in accordance with how much your subject is moving. Slow Shutter speed Fast EV shift 2.
OTHER RECORDING FUNCTIONS 3. Press the shutter button half way. Setting Exposure Settings Manually • This causes the camera to configure the aperture value automatically in accordance with the shutter speed you selected. Then it focuses the image. In the M mode (manual exposure), you can adjust shutter speed and aperture manually. • The shutter speed and aperture values on the monitor screen will turn amber when you press the shutter button half way if the image is over-exposed or under-exposed. 1.
OTHER RECORDING FUNCTIONS 3. Use [ ] and [ ] to select the aperture value 5. Press the shutter button half way. (page 31) in the exposure panel, and then use [ ] and [ ] to change the setting. • This causes the camera to adjust focus automatically. 6. When the image is focused, press the shutter Aperture value* Depth of Field Wide Small button all the way down to record. F3.3 , 3.7 , 4.4 , 5.2 , 6.2 , 7.4 Shallow Deep * The above values are full wide angle optical zoom.
OTHER RECORDING FUNCTIONS IMPORTANT! Using Manual Assist On-screen Guidance • The shutter speed displayed in the A mode and the aperture value displayed in the S mode are rough approximations only. Because of this, these settings may be slightly different from the settings that appear when you press the shutter button half way (which are more precise).
OTHER RECORDING FUNCTIONS Exposure Mode Recording Precautions Using the BEST SHOT Mode • You may not be able to achieve the brightness you want when recording an image that is very dark or very bright. If this happens, use the M mode (manual exposure) to adjust the aperture or shutter speed manually. • Using slow shutter speeds can cause digital noise (graininess) to appear in the image.
OTHER RECORDING FUNCTIONS Scene Number 22 IMPORTANT! Scene Name • BEST SHOT scenes were not recorded using this camera. They are provided as samples only. • Due to shooting conditions and other factors, an image recorded using the setup of a BEST SHOT scene may not produce exactly the results you expect. • You can change the camera settings that are made when you select a BEST SHOT scene.
OTHER RECORDING FUNCTIONS NOTE Creating Your Own BEST SHOT Setup • Operation guidance and the currently selected BEST SHOT scene appear on the display for about two seconds if the camera is in the BEST SHOT mode when you turn it on. You can use the procedure below to save the setup of an image you recorded as a BEST SHOT scene. After that, you can recall the setup whenever you want to use it. 1. Align the mode dial with “ ”, and then press [SET].
OTHER RECORDING FUNCTIONS 5. Use [ ] and [ ] to select “Save”, and then NOTE press [SET]. • The following are the settings that are included in a BEST SHOT user setup: focus mode, EV shift value, filter, metering mode, white balance mode, flash intensity, sharpness, saturation, contrast, flash mode, ISO sensitivity, Flash Assist, aperture, shutter speed and ND filter. • Note that images recorded with this camera only can be used to create a BEST SHOT user setup.
OTHER RECORDING FUNCTIONS To delete a BEST SHOT user setup 1. Align the mode dial with “ Recording a Movie You can record high-resolution movies with stereo sound. Movie length is limited only by the amount of memory available for storage. You can select a resolution setting to suit your needs, and a variety of different movie modes provide plenty of movie making versatility. ”, and then press [SET]. 2. Use [ ] and [ ] to display the user setup you want to delete. • File Format: MPEG-4 AVI format 3.
OTHER RECORDING FUNCTIONS • Versatile Movie Recording Modes — Movie mode Use this mode for normal movie recording (page 106). — Past Movie mode This mode uses a 5-second buffer that is continually updated. Pressing the shutter button starts recording from five seconds prior to the point the button is pressed. Use this mode when you want to make sure you do not miss fast-moving action (page 107).
OTHER RECORDING FUNCTIONS Approximate Data Rate Frame Rate HQ (640 × 480 pixels) 4.2 megabits per second 30 frames/ second Normal (640 × 480 pixels) 2.2 megabits per second 30 frames/ second LP (320 × 240 pixels) 790 kilobits per second 15 frames/ second Setting Higher Quality Lower Quality Recording a Standard Movie (Movie Mode) Use the Movie Mode when you want to record a standard movie. 1. Align the mode dial with “ Remaining recording time ”.
OTHER RECORDING FUNCTIONS 3. To stop movie recording, press the shutter Recording Past Action (Past Movie Mode) button again. • When movie recording is complete, the movie file is stored in file memory. This mode uses a 5-second buffer that is continually updated. Pressing the shutter button starts recording from five seconds prior to the point the button is pressed. Use this mode when you want to make sure you do not miss fast-moving action.
OTHER RECORDING FUNCTIONS 2. Point the camera at the subject and then press the shutter button. Recording a Short Movie (Short Movie Mode) • This will record anything that went on in front of the lens during the previous five seconds and continue recording from the point that the shutter button was pressed. Recording can continue as long as there is memory available to store data. The Short Movie Mode records a movie of preset length each time you press the shutter button.
OTHER RECORDING FUNCTIONS ■ To record a Short Movie Mode movie 1. Align the mode dial with “ 4. Use [ ] and [ ] to specify the length of the future part (the part after the shutter button is pressed), and then press [ ]. ”. • This enters the Short Movie Mode and causes “ to appear on the monitor screen. ” 5. Use [ ] and [ ] to select the MOTION PRINT layout format you want, and then press [SET]. 2. Press [SET]. 3.
OTHER RECORDING FUNCTIONS ■ Movie Recording Precautions 6. Point the camera at the subject and then press the shutter button. • The flash does not fire in the Movie mode. • This camera also records audio. Note the following points when recording a movie. Stereo microphones — Take care that you do not block the stereo microphones with your fingers. — Good recording results are not possible when the camera is too far from the subject.
OTHER RECORDING FUNCTIONS • The effects of camera movement in an image become more pronounced when you record close ups or recording with a large zoom factor. Because of this, use of a tripod is recommended when recording close ups or recording with a large zoom factor. • Images may be out of focus if the subject is outside the shooting range of the camera. • Certain types of subjects are difficult to focus (page 65) and may cause blurry images.
OTHER RECORDING FUNCTIONS IMPORTANT! Creating Your Own MOVIE BEST SHOT Setup • MOVIE BEST SHOT scenes were not recorded using this camera. They are provided as samples only. • Images recorded using a MOVIE BEST SHOT scene may not produce the results you expected due to shooting conditions and other factors. • You can change the camera settings that are made when you select a MOVIE BEST SHOT scene.
OTHER RECORDING FUNCTIONS ■ To delete a MOVIE BEST SHOT user setup IMPORTANT! • When selecting a user setup, scroll to the end of the built-in MOVIE BEST SHOT scenes until “Recall User Scene” appears on the display. Then scroll further to see the user setup scenes. • Formatting the camera’s built-in memory (page 165) deletes all user MOVIE BEST SHOT setups. • The following are the settings that are included in a MOVIE BEST SHOT user setup.
OTHER RECORDING FUNCTIONS 1. In a REC mode, press [MENU]. Recording Audio 2. Select the “REC” tab, select “Audio Snap”, Adding Audio to a Snapshot and then press [ ]. You can add audio to a snapshot after you record it. 3. Use [ ] and [ ] to select “On” and then • Image Format: JPEG JPEG is an image format that provides efficient data compression. The file extension of a JPEG file is “.JPG”. press [SET]. • This enters the Audio Snapshot mode.
OTHER RECORDING FUNCTIONS ■ Audio Recording Precautions 5. Press the shutter button to start audio recording. • Take care that you do not block the stereo microphones with your fingers. • The operation lamp flashes green while recording is in progress. Stereo microphones 6. Recording stops after about 30 seconds or when you press the shutter button. IMPORTANT! • The Audio Snapshot mode is unavailable during image recording using Triple Self-timer.
OTHER RECORDING FUNCTIONS • An RGB histogram that shows the distribution of R (red) , G (green) , and B (blue) components is also displayed. This histogram can be used to determine whether there is too much or too little of each of the color components in an image. Using the Histogram You can use the [DISP] button to display a histogram on the monitor screen. The histogram lets you check exposure conditions as you record images (page 34).
OTHER RECORDING FUNCTIONS • When the histogram is too far to the right, it means that there are too many light pixels. This type of histogram results when the overall image is light. A histogram that is too far to the right may result in “white out” of the light areas of an image. IMPORTANT! • Note that the above histograms are shown for illustrative purposes only. You may not be able to achieve exactly the same shapes for particular subjects.
OTHER RECORDING FUNCTIONS NOTE REC Mode Camera Settings • You can also configure the settings listed below. See the referenced pages for more information. — Size (page 77) — Quality (Snapshots) (page 79) — Quality (Movies) (page 105) — White Balance (page 91) — Digital Zoom (page 68) — AF Area (page 82) — Audio Snap (page 114) — Flash Intensity (page 72) — Flash Assist (page 73) The following are the settings you can configure before recording an image using a REC mode.
OTHER RECORDING FUNCTIONS IMPORTANT! Specifying ISO Sensitivity • Under certain conditions, a high shutter speed in combination with a high ISO sensitivity setting can cause digital noise (graininess), which makes an image appear rough. For clean, good-quality images, use the lowest ISO sensitivity setting possible. • Using a high ISO sensitivity setting along with the flash to shoot a nearby subject may result in improper illumination of the subject.
OTHER RECORDING FUNCTIONS Center Weighted Center weighted metering measures light concentrating on the center of the focus area. Use this metering method when you want to exert some control over exposure, without leaving settings totally up to the camera. Selecting the Metering Mode The metering mode determines what part of the subject is metered for exposure. You can use the following procedure to change the camera’s metering mode. 1. In a REC mode, press [MENU].
OTHER RECORDING FUNCTIONS Using the Filter Function Specifying Outline Sharpness The camera’s filter function lets you alter the tint of an image when you record it. Use the following procedure to control the sharpness of image outlines. 1. In a REC mode, press [MENU]. 1. In a REC mode, press [MENU]. 2. Select the “REC” tab, select “Filter”, and then 2. Select the “REC” tab, select “Sharpness”, and press [ ]. then press [ ]. 3. Use [ ] and [ ] to select the setting you 3.
OTHER RECORDING FUNCTIONS Specifying Color Saturation Specifying Contrast Use the following procedure to control the intensity of the image you are recording. Use this procedure to adjust the relative difference between the light areas and dark areas of the image you are recording. 1. In a REC mode, press [MENU]. 1. In a REC mode, press [MENU]. 2. Select the “REC” tab, select “Saturation”, and 2. Select the “REC” tab, select “Contrast”, and then press [ ]. then press [ ]. 3.
OTHER RECORDING FUNCTIONS Turning the On-screen Grid On and Off Turning Image Review On and Off You can display gridlines on the monitor screen to help you compose images and ensure that the camera is straight when recording. Image review displays the images you record on the monitor screen as soon as you record them. Use the following procedure to turn image review on and off. 1. In a REC mode, press [MENU]. 2. Select the “REC” tab, select “Review”, and then press [ ]. 3.
OTHER RECORDING FUNCTIONS IMPORTANT! Using Icon Help • Selecting one of the following settings causes the icon and its Icon Help text to appear momentarily on the monitor screen. The icon and text disappear after a short while. — Flash mode “ Auto Flash” icon (page 69) — Focus mode “ Auto Focus” icon (page 81) — White balance “ AWB Auto WB” icon (page 91) Icon Help displays guidance text about an icon when you select it on the monitor screen while in a REC mode (page 29).
OTHER RECORDING FUNCTIONS Assigning Functions to the [ ] and [ ] Keys Specifying Power On Default Settings The camera’s “mode memory” feature lets you specify the power on default settings individually for the recording mode, flash mode, focus mode, white balance mode, ISO sensitivity, AF Area, self-timer, flash intensity, digital zoom mode, manual focus position and zoom position.
OTHER RECORDING FUNCTIONS Function On Auto Focus Auto White Balance Auto ISO Auto AF Area Spot Metering Self-timer Flash Intensity Digital Zoom MF Position Zoom Position* Setting when camera is turned off 1. In a REC mode, press [MENU]. Off Flash 2. Use [ ] and [ ] to select the “Memory” tab. 3. Use [ ] and [ ] to select the item you want to change, and then press [ ]. 4. Use [ ] and [ ] to select the setting you Multi want, and then press [SET].
OTHER RECORDING FUNCTIONS IMPORTANT! Resetting the Camera • Note that BEST SHOT mode settings take priority over mode memory settings. If you turn the camera off while in the BEST SHOT mode, all settings except for “REC Mode” and “Zoom Position” will be configured according to the BEST SHOT sample scene when you turn it back on again, regardless of mode memory on/off settings. • In the following modes, “ ” (Flash Off) is always selected as the flash mode regardless of mode memory on/off setting.
OTHER RECORDING FUNCTIONS 3. After configuring the settings you want, press Using the Shortcut Menu (EX Menu) [SET] to exit the shortcut menu. Pressing [EX] displays a shortcut menu that you can use to configure white balance, ISO sensitivity, metering, and AF area settings. 1. In a REC mode, press [EX]. 2. Use [ ] and [ ] to select the item you want, and then use [ ] and [ ] to scroll through the available settings. • Refer to the following pages for details about each of the settings.
OTHER RECORDING FUNCTIONS IMPORTANT! Installing the Lens Hood and a Lens Filter • The effectiveness of the lens hood depends on the angle of the light and other conditions. • Using the flash with the lens hood attached can cause vignetting (darkening of the corners of the image). Remove the lens hood before using the flash. • Carefully read the user documentation that comes with filters for information about how to use them properly. • Keep the following points in mind when purchasing a filter.
PLAYBACK PLAYBACK 2. Align the mode dial You can use the camera’s built-in monitor screen to view images after you record them. Mode dial with “ ” (PLAY mode). • This enters the PLAY mode. Basic Playback Operation Use the following procedure to scroll through files stored in the camera’s memory. 1. Open the monitor screen or press the power PLAY mode file type Folder name/ File name button to turn on the camera. • This causes an image or a message to appear on the monitor screen.
PLAYBACK 3. Use [ ] (forward) or [ ] (back) to scroll Playing an Audio Snapshot through files on the monitor screen. Perform the steps below to display an audio snapshot ) and play its audio. (indicated by 1. In the PLAY mode, use [ ] and [ ] until the image you want is displayed. NOTE 2. Press [SET]. • Holding down [ ] or [ ] scrolls images at high speed.
PLAYBACK IMPORTANT! Zooming the Display Image • Audio volume can be adjusted only when playback is being performed or is paused. Perform the following procedure to zoom the image currently on the monitor screen up to eight times its normal size. 1. In the PLAY mode, use [ ] and [ ] to display the image you want. 2. Shift the zoom controller towards Current zoom factor . • This zooms the images.
PLAYBACK IMPORTANT! Resizing an Image • Depending on the original size of the recorded image, you may not be able to zoom a display image the full eight times normal size. You can resize a recorded image to either of the three following sizes. • 1600 × 1200 pixels (UXGA): Best for print sizes 3.5˝ × 5˝ or smaller (More detail than 1280 × 960) • 1280 × 960 pixels (SXGA): Best for print sizes 3.
PLAYBACK 3. Use [ ] and [ ] to scroll through images and IMPORTANT! display the one you want to resize. • Resizing an image creates a new file that contains the image in the size you select. The file with the original image also remains in memory. • Note that you cannot resize the following types of images.
PLAYBACK 5. Use [ ], [ ], [ ], and [ ] to move the Cropping an Image cropping boundary up, down, left, or right until the area of the image you want to extract is within the boundary. You can use the following procedure to crop a portion of an enlarged image. 6. Press [SET] to extract the part of the image 1. In the PLAY mode, use [ ] and [ ] to scroll enclosed in the cropping boundary. through images and display the one you want to crop.
PLAYBACK IMPORTANT! Playing and Editing a Movie • Cropping an image creates a new file that contains the cropped image. The file with the original image also remains in memory. • Note that you cannot crop the following types of images. — 2560 × 1712 pixel (3:2) images — Movie images — Images created with MOTION PRINT — Images recorded with another camera • The cropping operation cannot be performed when there is not enough memory to store the cropped image.
PLAYBACK To do this: Do this: Fast forward or fast reverse playback • Each press increases the speed one more step. Press [ ] or [ ]. Return fast forward or fast reverse movie playback to normal speed Press [SET]. Pause movie playback Press [SET]. Scroll paused playback one frame Press [ ] or [ ]. Stop movie playback Press [MENU]. Adjust the movie audio volume level Press [ ] or [ ]. Toggle monitor screen indicators on and off Press [DISP].
PLAYBACK ■ To cut everything before or after a specific frame Editing a Movie Use the procedure in this section to edit and delete movies. Editing operations let you cut everything before or after a specific frame, or to cut everything between two frames. 1. While the movie you are editing is playing, press [SET]. IMPORTANT! • Cut operations cannot be undone. Make sure you really want to cut the part of the movie you are specifying before executing the cut operation.
PLAYBACK 4. Display the frame where you want the cut to 5. When the frame you be located. want is displayed, press [ ]. To do this: Do this: Fast forward or fast reverse playback Press [ ] or [ ]. Pause or unpause movie playback Press [SET]. Scroll paused playback one frame Press [ ] or [ ]. Cancel the cut operation Press [MENU]. Adjust the movie audio volume level Press [ ] or [ ]. 6. Use [ ] and [ ] to select “Yes,” and then press [SET]. • The message “Busy.... Please wait...
PLAYBACK ■ To cut everything between two specific frames 4. Display the starting frame where you want the first cut to be located. To do this: Do this: playing, press [SET]. Fast forward or fast reverse playback Press [ ] or [ ]. • This will pause movie playback. Pause or unpause movie playback Press [SET]. Scroll paused playback one frame Press [ ] or [ ]. Cancel the cut operation Press [MENU]. Adjust the movie audio volume level Press [ ] or [ ]. 1. While the movie is 2. Press [ ].
PLAYBACK 6. Repeat step 4 to Capturing a Still Image from a Movie (MOTION PRINT) display the ending frame where you want the second cut to be located. The MOTION PRINT feature lets you capture a frame from an existing movie and create a still image that is suitable for printing. There are two layouts you can use when capturing an image, and the layout you select determines the final image size. • The red portion of the indicator bar shows what part will be cut.
PLAYBACK ■ To capture a still image from a movie 6. After selecting the frame you want, press [SET]. 1. In the PLAY mode, use [ ] and [ ] to scroll through movies on the monitor screen and display the one that contains the frames you want. • This displays the resulting still image. • If you selected “9 frames” for the layout, the frame you selected in step 4 will be the main image, and the frames on either side of it will be used as the background frames. 2. Press [MENU]. 3.
PLAYBACK 2. Use [ ], [ ], [ ], and Displaying the 9-image View The following procedure displays nine images on the monitor screen at the same time. 1. In the PLAY mode, shift the zoom controller towards ( Selection boundary [ ] to move the selection boundary to the image you want. Pressing [ ] while the selection boundary is in the right column or [ ] while it is in the left column scrolls to the next full screen of nine images. ).
PLAYBACK 3. Use the screen that appears to configure the Playing a Slideshow image, time, and interval settings. A slideshow automatically plays back images in sequence at a fixed interval. • All Images Displays all images in camera memory. • OnIy This icon appears only in the case of snapshots and audio snapshots. • OnIy This icon appears only in the case of movies. Images 1. In the PLAY mode, press [MENU]. • One Image Displays a particular image. 2.
PLAYBACK 4. Use [ ] and [ ] to select “Start”, and then IMPORTANT! press [SET]. • Note that all buttons are disabled while an image change is in progress. Wait until an image is stopped on the monitor screen before performing a button operation, or hold down the button until the image stops. • Pressing [ ] during a slideshow will scroll to the previous image, while [ ] scrolls to the next image. • When the slideshow comes to a movie file, it plays the movie and its audio once.
PLAYBACK • When the slideshow reaches a movie while “One Image” is selected for “Images”, the movie will repeat playback for the time specified by for “Time”. Rotating the Display Image Use the following procedure to rotate the image 90 degrees and register the rotation information along with the image. After you do this, the image is always displayed in its rotated orientation. 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Rotation”, and then press [ ].
PLAYBACK 4. Use [ ] and [ ] to Adding Audio to a Snapshot select “Rotate”, and then press [SET]. The “after-recording” feature lets you add audio to snapshots after they are recorded. You can also re-record the audio of an audio snapshot (one with a icon on it). • Each press of [SET] rotates the image 90 degrees. • Audio Format: WAVE/ADPCM recording format This is the Windows standard format for audio recording. The file extension of a WAVE/ADPCM file is “.WAV”. 5.
PLAYBACK 1. In the PLAY mode, use [ ] and [ ] to scroll To re-record audio through snapshots until the one to which you want to add audio is displayed. 1. In the PLAY mode, use [ ] and [ ] to scroll through snapshots until the one whose audio you want to re-record is displayed. 2. Press [MENU]. 3. Select the “PLAY” 2. Press [MENU]. tab, select “Dubbing”, and then press [ ]. 3. Select the “PLAY” tab, select “Dubbing”, and then press [ ]. 4. Use [ ] and [ ] to select “Delete”, and then press [SET].
PLAYBACK IMPORTANT! Displaying Camera Images on a TV Screen • Take care that you do not block the stereo microphones with your fingers. • Good recording results are not possible when the camera is too far from the subject. You can display recorded images on a TV screen and even use a TV screen to compose images before you record them. To display camera images on a TV, you need a television equipped with a video input terminal, and the AV cable that comes with the camera. Stereo microphones 1.
PLAYBACK AV cable Yellow Yellow (Video) White Red White (Left Channel) Red (Right Channel) IMPORTANT! • All icons and indicators that appear on the monitor screen also appear on the TV screen. • Stereo output is possible if you connect to a TV that supports stereo input. • Depending on the size of the TV screen, recorded images and images during recording may not fill the entire screen. • For video output, the audio volume level is initially set to maximum.
PLAYBACK IMPORTANT! Selecting the Video Input System • Images will not display properly if you select the wrong video input system. • This camera supports the NTSC and PAL video input systems only. Images will not display properly if you use a TV (monitor) that is designed for a different video input system. You can select either NTSC or PAL for the video output system to match the system of the TV you are using. 1. In a REC mode or the PLAY mode, press [MENU]. 2.
DELETING FILES DELETING FILES You can delete a single file, or you can delete all files currently in memory. Deleting a Single File 1. In the PLAY mode, IMPORTANT! press [ ] ( • Note that file deletion cannot be undone. Once you delete a file, it is gone. Make sure you really do not need a file anymore before you delete it. Especially when deleting all files, make sure you check all the files you have stored before proceeding. • A protected file cannot be deleted.
DELETING FILES Deleting All Files 1. In the PLAY mode, press [ ] ( ). 2. Use [ ] and [ ] to select “All Files Delete”, and then press [SET]. 3. Use [ ] and [ ] to select “Yes”. • To exit the file delete operation without deleting anything, select “No”. 4. Press [SET] to delete all the files. • The message “There are no files.” appears on the screen after all of the files are deleted.
FILE MANAGEMENT FILE MANAGEMENT The file management capabilities of the camera make it easy to keep track of images. You can protect files against deletion and store the files you want in the camera’s built-in memory. Each folder can hold files numbered up to 9,999. Trying to store the 10,000th file in a folder causes the next serially numbered folder to be created. File names are generated as shown below. Example: Name of the 26th file Folders CIMG0026.
FILE MANAGEMENT 4. Use [ ] and [ ] to Protecting Files select “On”, and then press [SET]. Once you protect a file it cannot be deleted (page 152). You can protect files individually or you can protect all files in memory with a single operation. • A file that is protected is indicated by the mark. To protect a single file • To unprotect a file, select “Off” in step 4, and then press [SET]. 1. In the PLAY mode, press [MENU]. 5. Press [MENU] to exit the menu screen. 2.
FILE MANAGEMENT To protect all files in memory 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Protect”, and then press [ ]. 3. Use [ ] and [ ] to select “All Files : On”, and then press [SET]. • To unprotect all files, press [SET] in step 3 so the setting shows “All Files : Off”. 4. Press [MENU] to exit the menu screen.
OTHER SETTINGS OTHER SETTINGS 4. Use [ ] and [ ] to change the setting, and Configuring Sound Settings then press [SET]. You can configure different sounds to play whenever you turn on the camera, press the shutter button half-way or all the way, or perform a key operation. To configure sound settings 1. Press [MENU]. 2. Select the “Set Up” tab, select “Sounds”, and then press [ ]. 3. Use [ ] and [ ] to select the sound whose setting you want to configure, and then press [ ].
OTHER SETTINGS To set the confirmation tone volume level To set the audio volume level for movie and audio snapshot playback 1. Press [MENU]. 1. Press [MENU]. 2. Select the “Set Up” tab, select “Sounds”, and 2. Select the “Set Up” tab, select “Sounds”, and then press [ ]. 3. Use [ ] and [ ] to select “ then press [ ]. 3. Use [ ] and [ ] to select “ Operation”. 4. Use [ ] and [ ] to specify the volume setting Play”. 4. Use [ ] and [ ] to specify the playback you want, and then press [SET].
OTHER SETTINGS Specifying the File Name Serial Number Generation Method Setting the Clock Use the procedures in this section to select a Home Time Zone, and to change its date and time settings. If you want to change the time and date setting only without changing the Home Time Zone, perform the procedure under “To set the current time and date” (page 161) only. Use the following procedure to specify the method for generating the serial number used for file names (page 154). 1. Press [MENU]. 2.
OTHER SETTINGS 6. Use [ ] and [ ] to select the city you want, To select your Home Time zone and then press [SET]. 1. Press [MENU]. 7. After selecting the city you want, press [SET] to register its zone as your Home Time zone. 2. Select the “Set Up” tab, select “World Time”, and then press [ ]. • This displays the current World Time zone. 3. Use [ ] and [ ] to select “Home”, and then press [ ]. 4. Use [ ] and [ ] to select “City”, and then press [ ]. 5.
OTHER SETTINGS To set the current time and date Changing the Date Format 1. Press [MENU]. You can select from among three different formats for display of the date. 2. Select the “Set Up” tab, select “Adjust”, and 1. Press [MENU]. then press [ ]. 2. Select the “Set Up” tab, select “Date Style”, 3. Set the current date and the time. and then press [ ]. To do this: Do this: Change the setting at the current cursor location Press [ ] or [ ]. then press [SET].
OTHER SETTINGS To configure World Time settings Using World Time You can use the World Time screen to select a time zone and instantly change the time setting of the camera’s clock when you go on a trip, etc. World Time lets you select one of 162 cities in 32 time zones. 1. Press [MENU]. 2. Select the “Set Up” tab, select “World Time”, and then press [ ]. 3. Use [ ] and [ ] to select “World”, and then To display the World Time screen press [ ]. 1. Press [MENU]. 4. Use [ ] and [ ] to 2.
OTHER SETTINGS 5. Use [ ], [ ], [ ], and Changing the Display Language [ ] to select the geographical area you want, and then press [SET]. You can use the following procedure to select one of ten languages as the display language. 1. Press [MENU]. 2. Select the “Set Up” tab, select “Language”, 6. Use [ ] and [ ] to select the city you want, and then press [ ]. and then press [SET]. 3. Use [ ], [ ], [ ], and [ ] to change the 7.
OTHER SETTINGS • Mass Storage causes the camera to see the computer as an external storage device. Use this setting for normal transfer of images from the camera to a computer (using the bundled Photo Loader application). • PTP (PictBridge) simplifies the transfer of image data to the connected device. Changing the USB Port Protocol You can use the procedure below to change the communication protocol of the camera’s USB port when connecting to a computer, printer, or other external device.
OTHER SETTINGS 1. Check to make sure there is no memory card Formatting Built-in Memory loaded in the camera. Formatting built-in memory deletes any data stored in it. • If there is a memory card loaded in the camera, remove it (page 168). IMPORTANT! 2. Press [MENU]. • Note that data deleted by a format operation cannot be recovered. Check to make sure you do not need any of the data in memory before you format it. • Formatting built-in memory deletes the following.
USING A MEMORY CARD USING A MEMORY CARD You can expand the storage capabilities of your camera by using a commercially available memory card (SD memory card or MultiMediaCard). You can also copy files from built-in flash memory to a memory card and from a memory card to flash memory. IMPORTANT! • Use only an SD memory card or a MultiMediaCard with this camera. Proper operation is not guaranteed when any other type of card is used.
USING A MEMORY CARD 2. Positioning the Using a Memory Card memory card so its front is facing in the same direction as the camera’s lens, carefully slide it into the card slot. Slide the card all the way in until you hear it click securely into place. IMPORTANT! • Make sure you turn off the camera before inserting or removing a memory card. • Be sure to orient the card correctly when inserting it. Never try to force a memory card into the slot when you feel resistance.
USING A MEMORY CARD IMPORTANT! To replace the memory card • Never insert any other object besides a memory card into the camera’s card slot. Doing so creates the risk of damage to the camera and card. • Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your dealer or nearest CASIO authorized service center. • Never remove a card from the camera while the operation lamp is flashing green.
USING A MEMORY CARD Formatting a Memory Card ■ To format a memory card Formatting a memory card deletes any data already stored on it. 1. Load the memory card into the camera. 2. Turn on the camera, and press [MENU]. IMPORTANT! • Be sure to use the camera to format a memory card. Formatting a memory card on a computer and then using it in the camera can slow down data processing by the camera.
USING A MEMORY CARD ■ Memory Card Precautions Copying Files • If a memory card starts to behave abnormally, you can restore normal operation by reformatting it. However, we recommend that you always take along more than one memory card whenever using the camera far away from the home or office. • We recommend that you format a memory card before using it for the first time after purchasing it, or whenever the card you are using seems to be the cause of abnormal images.
USING A MEMORY CARD To copy all the files in built-in memory to a memory card To copy a specific file from a memory card to built-in memory 1. Load the memory card into the camera. 1. Perform steps 1 through 3 of the procedure under “To copy all the files in built-in memory to a memory card”. 2. Turn on the camera. Next, enter the PLAY mode and press [MENU]. 2. Use [ ] and [ ] to select “Card 3. Select the “PLAY” tab, Built-in”, and then press [SET]. select “Copy”, and then press [ ]. 3.
USING A MEMORY CARD 5. Press [MENU] to exit the copy operation. NOTE • Files are copied to the folder in built-in memory whose name has the largest number.
PRINTING IMAGES PRINTING IMAGES ■ Printing Directly on a Printer Equipped with a Card Slot, or a Printer that Supports PictBridge A digital camera provides you with a variety of different ways to print the images it records. The three main printing methods are described below. Use the method that best suits your needs.
PRINTING IMAGES ■ Printing with a Computer DPOF Windows Users The camera comes bundled with Photo Loader and Photohands applications, which can be installed on a Windows computer for image transfer, management, and printing. For more information, see “Using the Camera with a Windows Computer” (pages 183, 200).
PRINTING IMAGES 5. Use [ ] and [ ] to specify the number of To configure print settings for a single image copies. • You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image printed. 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, 6. To turn on date select “DPOF”, and then press [ ]. stamping for the prints, press [DISP] so is displayed. 12 • 1 indicates that date stamping is turned on.
PRINTING IMAGES 5. To turn on date stamping for the prints, press To configure print settings for all images [DISP] so 12 1 is displayed. 1. In the PLAY mode, press [MENU]. • 2. Select the “PLAY” tab, select “DPOF”, and • To turn off date stamping for the prints, press [DISP] so is not displayed. 12 1 indicates that date stamping is turned on. 12 1 then press [ ]. 6. After all the settings are the way you want, 3. Use [ ] and [ ] to select “All images”, and press [SET] to apply them.
PRINTING IMAGES IMPORTANT! Using PictBridge • DPOF settings are not cleared automatically after printing is complete. This means that if you perform another printing operation without clearing DPOF settings, printing will be performed in accordance with the last settings you configured. If you want to prevent this from happening, perform the procedure under “To configure print settings for all images” (page 176) and change the number of copies to “00”.
PRINTING IMAGES 1. Press [MENU]. • To power the camera using AC power, you need to purchase an optionally available AC adaptor. 2. Select the “Set Up” tab, select “USB”, and • The camera does not draw power over the USB cable. then press [왘]. 3. Use [왖] and [왔] to select the setting you 5. Use the USB cable that comes with the want, and then press [SET]. camera to connect the camera to a printer.
PRINTING IMAGES 6. Turn on the printer. 10. Use [ ] and [ ] to select the paper size you want to use for printing, and then press [SET]. 7. Load paper for printing the images into the • The following are the print sizes that are available. 3.5˝ × 5˝ 5˝ × 7˝ 4˝ × 6˝ A4 8.5˝ × 11˝ By Printer printer. 8. Press the camera’s power button. • This displays the print menu on the camera’s monitor screen. • Selecting “By Printer” prints using the paper size selected on the printer.
PRINTING IMAGES 11. Use [ ] and [ ] to 12. On the camera’s monitor screen, use [ ] and specify the print option you want. [ ] to select “Print”, and then press [SET]. • This starts printing and displays the message “Busy.... Please wait...” on the monitor screen. The message will disappear after a short while, even though printing is still being performed. Pressing any of the camera’s buttons while printing is in progress will cause the message to reappear.
PRINTING IMAGES Date Printing ■ Printing Precautions Any one of the procedures described below can be used to include the recording date in image prints. Correct date printing requires that the current date be set on the camera before the image is recorded. • Specifying date printing with DPOF settings (page 174) – Some printers may have settings that disable time stamp and/or DPOF printing. See the user documentation that comes with your printer for details about how to enable these features.
PRINTING IMAGES PRINT Image Matching III Exif Print Images include PRINT Image Matching III data (mode setting and other camera setup information). A printer that supports PRINT Image Matching III reads this data and adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them. Exif Print is an internationally supported, open standard file format that makes it possible to capture and display vibrant digital images with accurate colors. With Exif 2.
VIEWING IMAGES ON A COMPUTER VIEWING IMAGES ON A COMPUTER After using the USB cable to establish a USB connection between the camera and your computer, you can use your computer to view images in file memory and copy images to your computer’s hard disk or other storage media. In order to establish a USB connection with a Windows computer, you first need to install the USB driver located on the CD-ROM that comes bundled with the camera onto your computer.
VIEWING IMAGES ON A COMPUTER IMPORTANT! Do not try to establish a connection between the camera and computer before installing the USB driver onto the computer. If you do, the computer will not be able to recognize the camera. • Low battery power can cause the camera to power down suddenly during data communication. Use of the special AC adaptor is recommended to power the camera during data communication.
VIEWING IMAGES ON A COMPUTER 1. Make sure the camera’s battery is charged 2. Turn on the camera, and then press [MENU]. sufficiently. • It makes no difference whether the camera is in a REC mode or the PLAY mode. • To power the camera using AC power, you need to purchase an optionally available AC adaptor. 3. Select the “Set Up” tab, select “USB”, and then press [ ]. [DC IN 4.5V] 4. Use [ ] and [ ] to select “Mass Storage”, and then press [SET]. 5.
VIEWING IMAGES ON A COMPUTER 6. On the menu screen that appears, click 9. Turn off the camera, and connect the USB “English”. cable that comes bundled with the camera to the camera’s [USB/AV] port and your computer’s USB port. 7. Click [USB driver C] and then [Install]. • This starts installation. • When connecting the USB cable to the camera, make sure the 왖 symbol on the camera’s [USB/AV] port is aligned with the 왖 symbol on the USB cable plug.
VIEWING IMAGES ON A COMPUTER • This will cause your computer to create a hardware profile for camera’s built-in memory or the memory card loaded in the camera. You do not need to install the USB driver every time. After you install it once, your computer will recognize the camera’s built-in memory or its memory card when you connect the camera using the USB cable. • Take care when connecting the USB cable to the camera or your computer. USB ports and cable plugs are shaped for proper positioning.
VIEWING IMAGES ON A COMPUTER 11. On your computer, double-click “My NOTE Computer”. • If you open a rotated image on your computer, the original unrotated version will appear (page 146). This is true both for a rotated image opened from camera memory and for a rotated image that has been copied to your computer’s hard disk. • If you are running Windows XP, click [Start] and then [My Computer]. 12. Double-click “Removable Disk”. • Your computer sees the camera’s file memory as a removable disk. 16.
VIEWING IMAGES ON A COMPUTER Windows 98, 2000, Me IMPORTANT! 1. In the camera’s file memory (Removable Disk), rightclick the “Dcim” folder. • Never use your computer to edit, delete, move, or rename images stored in the camera’s file memory. Doing so can cause problems with the image management data used by the camera, which may make it impossible to display images on the camera or it may cause large error in the number of images value displayed by the camera.
VIEWING IMAGES ON A COMPUTER ■ USB Connection Precautions 17. Depending on the version of Windows you are running, use one of the following procedures to terminate the USB connection. • Do not leave the same image displayed on your computer screen for a long time. Doing so can cause the image to “burn in” on the screen. • Never disconnect the USB cable, or perform any camera operation while data communication is in progress. Doing so can cause data to become corrupted.
VIEWING IMAGES ON A COMPUTER Using the Camera with a Macintosh Computer 1. Load a fully charged battery into the camera, and configure the required camera settings for USB connection to a computer. The following are the general steps for viewing and copying files from a Macintosh. You can find details about each operation in the procedures that follow below. Note that you should also refer to the documentation that comes with your Macintosh for other information about USB connections, etc. 2.
VIEWING IMAGES ON A COMPUTER 1. Make sure the camera’s battery is charged IMPORTANT! sufficiently. • Low battery power can cause the camera to power down suddenly during data communication. Use the optional AC adaptor is recommended to power the camera during data communication with a computer. • If you want to transfer files from the camera’s built-in memory to a computer, make sure there is no memory card loaded in the camera before you connect the USB cable. • This camera supports USB 2.
VIEWING IMAGES ON A COMPUTER 2. Turn on the camera, and then press [MENU]. 5. Turn off the camera, and connect the USB cable that comes bundled with the camera to the camera’s [USB/AV] port and your computer’s USB port. • It makes no difference whether the camera is in a REC mode or the PLAY mode. 3. Select the “Set Up” tab, select “USB”, and • When connecting the USB cable to the camera, make sure the symbol on the camera’s [USB/AV] port is aligned with the symbol on the USB cable plug.
VIEWING IMAGES ON A COMPUTER 8. Double-click the file that contains the image • Take care when connecting the USB cable to the camera or your computer. USB ports and cable plugs are shaped for proper positioning. you want to view. • For information about file names, see “Memory Folder Structure” on page 197. • Plug the USB cable plugs into the ports securely, as far as they will go. Proper operation is not possible if connections are not correct. NOTE 6. Turn on the camera.
VIEWING IMAGES ON A COMPUTER ■ USB Connection Precautions IMPORTANT! • Never use your computer to edit, delete, move, or rename images stored in the camera’s file memory. Doing so can cause problems with the image management data used by the camera, which may make it impossible to display images on the camera or it may cause large error in the number of images value displayed by the camera. Always copy images to your computer before performing any edit, delete, move, or rename operation.
VIEWING IMAGES ON A COMPUTER Using a Commercially Available SD Memory Card Reader/Writer See the user documentation that comes with the SD memory card reader/writer for details about how to use it. Using a Memory Card to Transfer Images to a Computer The procedures in this section describe how to transfer images from the camera to your computer using a memory card. Using a Computer with a Built-in SD Memory Card Slot Insert the SD memory card directly into the slot.
VIEWING IMAGES ON A COMPUTER Memory Folder Structure Memory Data Images recorded with this camera and other data are stored in memory using DCF (Design rule for Camera File system) protocol. DCF protocol is designed to make it easier to exchange image and other data between digital cameras and other devices. ■ Folder Structure DCIM (DCIM Folder) 100CASIO CIMG0001.JPG CIMG0002.AVI CIMG0004.JPG CIMG0004.
VIEWING IMAGES ON A COMPUTER ■ Folder and File Contents • DPOF file folder Folder that contains DPOF files • DCIM folder Folder that stores all of the digital camera files • BEST SHOT folder (Built-in memory only) Folder that contains BEST SHOT user setup files • Storage folder Folder for storing files created by the digital camera • BEST SHOT user setup files (Built-in memory only) Files that contain BEST SHOT user setups • Image file File that contains an image recorded with the digital camera (Fil
VIEWING IMAGES ON A COMPUTER ■ Built-in Memory and Memory Card Precautions Image Files Supported by the Camera • Image files recorded with this camera • DCF protocol image files • Note that the folder named “DCIM” is the parent (top) folder of all the files in memory. When transferring memory contents to a hard disk, CD-R, MO disk, or other external storage, treat all the contents inside a DCIM folder as a set and always keep them together. You can change the name of the DCIM folder on your computer.
USING THE CAMERA WITH A COMPUTER USING THE CAMERA WITH A COMPUTER This section explains the software and applications on the CD-ROM that comes bundled with the camera, and provides an overview of what you can do with them. Note that the procedure you need to perform depends on whether you are using computer running under Windows (see below) or a Macintosh (see page 215).
USING THE CAMERA WITH A COMPUTER CD-ROM Software Purpose Movie playback Movie editing Viewing of user documentation (PDF) files Software Name Supported Windows Versions Required Operation Windows Media Player 9 * DirectX 9.0c XP/2000/Me/98SE • If you can connect to the Internet Connect to the Internet for automatic installation for the applicable codec (page 209). • If you cannot connect to the Internet Install Windows Media Player 9 (page 210).
USING THE CAMERA WITH A COMPUTER USB driver Type C OS: XP/2000/Me/98SE/98 Computer System Requirements Computer system requirements are different for each of the applications. Be sure to check the requirements for the particular application you are trying to use. Note that the values provided here are minimum requirements for running each application. Actual requirements are greater, depending on the number of images and the sizes of the images being handled.
USING THE CAMERA WITH A COMPUTER Windows Media Player 9 OS: XP/2000/Me/98SE CPU: 233 MHz Intel Pentium II, AMD, etc. Memory: 64MB HD: 100MB Other: Sound card; 800 × 600 or greater display resolution; Internet Explorer 5.01 or higher Photohands 1.0 OS: XP/2000/Me/98SE/98 Memory: At least 64MB HD: At least 10MB DirectX 9.0c OS: XP/2000/Me/98SE/98 HD: At least 65MB free space during installation, 18MB after installation is complete. • If you are running Windows 98, install the Windows 98 WMP6.
USING THE CAMERA WITH A COMPUTER Managing Images on a PC ■ Getting Started To manage images on a PC, you need to install the Photo Loader application from the CD-ROM that comes with the camera. • Use the CD-ROM whose contents label shows “Photo Loader”. Start up your computer and insert the CD-ROM into its CDROM drive. This will automatically launch the menu application, which displays a menu screen on your computer. • The menu application may not start up automatically on some computers.
USING THE CAMERA WITH A COMPUTER ■ Viewing the Contents of the “Read me” File ■ Installing Photo Loader You should always read the “Read me” file for “Photo Loader” before installing it. The “Read me” file contains information you need to know when installing the application. 1. Click the “Install” button for “Photo Loader”. 2. Follow the instructions that appear on your computer screen. 1. Click the “Read me” button for “Photo IMPORTANT! Loader”.
USING THE CAMERA WITH A COMPUTER ■ Checking for the Proper Version of DirectX 4. Click [Exit] to exit DirectX Diagnostic Tool. • If your PC already has DirectX 9.0 or higher installed, you do not need to install DirectX 9.0c from the bundled CD-ROM. In order to manage images using Photo Loader, your computer also needs to have DirectX 9.0 or higher installed. You can check the installed version of DirectX using your PC’s DirectX Diagnostic Tool. • If your PC does not have DirectX 9.
USING THE CAMERA WITH A COMPUTER ■ Getting Started Retouching, Reorienting, and Printing a Snapshot Start up your computer and insert the CD-ROM into its CDROM drive. This will automatically launch the menu application, which displays a menu screen on your computer. In order to retouch, reorient, or print snapshots on your PC, you need to install Photohands from the CD-ROM that comes bundled with the camera. • Use the CD-ROM whose contents label shows “Photohands”.
USING THE CAMERA WITH A COMPUTER ■ Viewing the Contents of the “Read me” File ■ Installing Photohands You should always read the “Read me” file for “Photohands” before installing it. The “Read me” file contains information you need to know when installing the application. 1. Click the “Install” button for “Photohands”. 2. Follow the instructions that appear on your computer screen. 1. Click the “Read me” button for “Photohands”.
USING THE CAMERA WITH A COMPUTER 5. This will cause the movie file recorded with Playing a Movie the camera to start playing. In order to play a movie recorded with this camera on your PC using Windows Media Player, you need to install MPEG-4 codec. NOTE • If your PC already has MPEG-4 codec installed, it will start playing the movie as soon as you click it. • If you are using Windows Media Player 8 or 9, perform the following steps in order to ensure stable movie display. 1.
USING THE CAMERA WITH A COMPUTER ■ To install the codec on a PC that cannot connect to the Internet ● Getting Started Start up your computer and insert the CD-ROM into its CDROM drive. This will automatically launch the menu application, which displays a menu screen on your computer. If your PC cannot connect to the Internet, install Windows Media Player 9 from the CD-ROM that comes bundled with the camera. • Use the CD-ROM whose contents label shows “Windows Media Player 9”.
USING THE CAMERA WITH A COMPUTER ● Viewing the Contents of the “Read me” File You should always read the “Read me” file for “Windows Media Player 9” before installing it. The “Read me” file contains information you need to know when installing the application. IMPORTANT! • If your PC is running Windows 98, install the Windows 98 WMP6.4 codec instead of Windows Media Player 9. • In the case of Windows 2000 or 98SE, you need to install DirectX 9.0c.
USING THE CAMERA WITH A COMPUTER Editing a Movie ■ Getting Started In order to edit movies on your PC, you need to install Ulead Movie Wizard SE VCD from the bundled CD-ROM. • Use the CD-ROM whose contents label shows “Ulead Movie Wizard SE VCD”. Start up your computer and insert the CD-ROM into its CDROM drive. This will automatically launch the menu application, which displays a menu screen on your computer. • The menu application may not start up automatically on some computers.
USING THE CAMERA WITH A COMPUTER ■ Viewing the Contents of the “Read me” File Viewing User Documentation (PDF Files) You should always read the “Read me” file for “Ulead Movie Wizard SE VCD” before installing it. The “Read me” file contains information you need to know when installing the application. 1. In the “Manual” area, click the name of the manual you want to read. IMPORTANT! 1.
USING THE CAMERA WITH A COMPUTER User Registration You can perform user registration over the Internet. To do so, of course, you need to be able to connect to the Internet with your computer. 1. Click the “Registration” button. • This starts up your Web browser and accesses the user registration website. Follow the instructions that appear on your computer screen to register. Exiting the Menu Application 1. On the menu screen, click “Exit” to exit the menu.
USING THE CAMERA WITH A COMPUTER Using the Camera with a Macintosh Computer Your digital camera comes bundled with useful applications for using it in combination with a computer. Install the applications you need on your computer. About the bundled CD-ROM The CD-ROM that comes bundled with the camera contains the applications described below. Installation of these applications is optional, and you should install only the ones you want to use.
USING THE CAMERA WITH A COMPUTER Photo Loader 1.1 OS: 9 Memory: 32MB HD: At least 3MB Computer System Requirements Computer system requirements are different for each of the applications. Be sure to check the requirements for the particular application you are trying to use. Note that the values provided here are minimum requirements for running each application. Actual requirements are greater, depending on the number of images and the sizes of the images being handled.
USING THE CAMERA WITH A COMPUTER IMPORTANT! Managing Images on a Macintosh • If you are upgrading to the new version of Photo Loader from a previous version and you want to use library management data and HTML files created using the old version of Photo Loader, be sure to read the “Important” file in the “Photo Loader” folder. Follow the instructions in the file to use your existing library management files.
USING THE CAMERA WITH A COMPUTER ■ To view the Photo Loader user’s guide Viewing User Documentation (PDF Files) You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems Incorporated website and install Acrobat Reader. 1. On the CD-ROM, open the “Manual” folder. 2. Open the “Photo Loader” folder and then open the “English” folder. 3. Open “PhotoLoader_english”. ■ To view the camera user’s guide 1.
APPENDIX APPENDIX Menu Reference The following shows lists of menus that appear in REC modes and the PLAY mode, and their settings. • The settings that are underlined in the following table are initial defaults.
APPENDIX ● Memory Tab Menu ● Set Up Tab Menu Flash Focus On / Off On / Off Sounds Startup / Half Shutter / Shutter / Operation / White Balance ISO On / Off On / Off File No. Continue / Reset World Time Home / World AF Area Metering On / Off On / Off Self-timer Flash Intensity On / Off On / Off Date Style YY/MM/DD / DD/MM/YY / MM/DD/YY Digital Zoom MF Position On / Off On / Off Adjust Time setting Language Zoom Position On / Off Operation / Play Home Time setup (city, DST, etc.
APPENDIX ■ PLAY Mode Indicator Lamp Reference ● PLAY Tab Menu Slideshow Start / Images / Time / Interval / Cancel MOTION PRINT 9 frames / 1 frame / Cancel Cut (Before) / Movie Editing (Between) / Cut Operation lamp Self-timer lamp Cut (After) / Cancel DPOF Select images / All images / Cancel Protect On / All Files : On / Cancel Rotation Rotate / Cancel 1600 × 1200 / 1280 × 960 / 640 × 480 / Resize The camera has two indicator lamps: an operation lamp and a self-timer lamp.
APPENDIX ■ REC Modes Operation Lamp Green Red Operation Lamp Self-timer Lamp Green Self-timer Lamp Red Meaning Red Pattern 2 Operational (Power on, recording enabled) Pattern 3 Flash is charging. Lit Flash charging is complete. Auto Focus operation was Lit successful. Pattern 3 Cannot Auto Focus. Lit Sleep state.
APPENDIX ■ PLAY Mode Operation Lamp Green Red ■ Rapid Charger Self-timer Lamp The rapid charger has a [CHARGE] lamp that lights or flashes in accordance with the rapid charger operation that is being performed.
APPENDIX Troubleshooting Guide Symptom Possible Cause Power does not turn on. 1) The battery is not oriented correctly. 2) The battery is dead. 1) Orient the battery correctly (page 42). 2) Charge the battery (page 37). If the battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available NP-40 rechargeable lithium ion battery. Camera suddenly powers down. 1) Auto Power Off activated (page 52).
APPENDIX Image Recording Symptom Possible Cause Action The subject is out of focus in the recorded image. The image is not focused properly. When composing the image, make sure the subject on which you want to focus is located inside the focus frame. The flash does not fire. ” (flash off) is selected as the flash mode. 1) “ 2) The battery is dead. 3) The camera is in a movie mode (Movie Mode, Past Movie Mode, Short Movie Mode, MOVIE BEST SHOT Mode).
APPENDIX Movies Symptom Possible Cause Action Vertical lines on the monitor screen. Recording a very brightly lit subject can cause a vertical band to appear in the monitor screen image. This is a CCD phenomenon known as “vertical smear”, and does not indicate malfunction of the camera. Note that vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a movie. Noise in audio. Auto Focus, zoom, and aperture operation noise.
APPENDIX Other Playback Symptom Possible Cause Action Color of the playback image is different from the image on the monitor screen during recording. Sunlight or light from another source is shining directly into the lens during recording. Position the camera so sunlight does not shine directly into the lens. Images are not displayed. A memory card with non-DCF images recorded with another camera is loaded in the camera.
APPENDIX If you have problems installing the USB driver... You may not be able to install the USB driver properly if you use the USB cable to connect the camera to a computer running Windows before installing the USB driver from the bundled CD-ROM, or if you have another type of driver installed. This will make it impossible for the computer to recognize the digital camera when it is connected. If this happens, you will need to reinstall the camera’s USB driver.
APPENDIX Display Messages Battery is low. The battery is dead. Can not find the file. The camera cannot find a image specified by the slideshow “Images” setting. Specify another image (page 144). Cannot register any more files. Card ERROR • You are attempting to save a BEST SHOT scene when there are already 999 scenes in the “SCENE” folder, or a MOVIE BEST SHOT when there are already 999 scenes in the “MSCENE” folder. Some problem occurred with the memory card.
APPENDIX Record Error Image compression could not be performed during image data storage for some reason. Record the image again. This card is not formatted. The memory card loaded in the camera is not formatted. Format the memory card (page 169). Replenish ink! The camera is in the Printer mode, and the printer is running low on ink or is out of ink. This file cannot be played. The image file or audio file is corrupted, or is a type that cannot be displayed by this camera.
APPENDIX Data Size Specifications • Snapshots Product ............................... Digital Camera File Size (pixels) 2560 × 1920 Model .................................. EX-P505 ■ Camera Functions 2560 × 1712 (3:2) Image Files Format Snapshots ....................... JPEG (Exif Ver.2.2); DCF (Design rule for Camera File system) 1.0 standard; DPOF compliant Movies ............................. AVI (MPEG-4) Audio ............................... WAV 2048 × 1536 1600 × 1200 (UXGA) Recording Media ..
APPENDIX Delete .................................. Single-file, all files (with protection) • Movies Image Size (Pixels) Maximum Recording Time Per File Approximate Data Rate (Frame Rate) Approximate Recording Time for Built-in Flash Memory 7.5 MB Approximate Recording Time for SD Memory Card 256MB HQ 640 × 480 Until memory full 4.2 megabits per second (30 frames / second) 14 seconds 8 minutes and 10 seconds Normal 640 × 480 Until memory full 2.
APPENDIX Approximate Focus Range (from lens surface) Auto Focus ...................... Snapshots: 40 cm to ∞ (1.3´ to ∞) Movies: 10cm to ∞ (0.3´ to ∞) Macro .............................. 1 cm to 50 cm (0.4˝ to 19.7˝) Infinity Mode .................... ∞ Manual ............................. 1 cm to ∞ (0.4˝ to ∞) • Using optical zoom causes the above ranges to change. Aperture .............................. F3.3, 3.7, 4.4, 5.2, 6.2, 7.4 • Using optical zoom causes the aperture to change. White Balance .....
APPENDIX Audio Recording Time Audio Snapshot ............... Approximately 30 seconds maximum per image After Recording ............... Approximately 30 seconds maximum per image ■ Power Requirements Monitor Screen .................. 2.0-inch TFT color LCD 84,960 pixels (354 × 240) The values below indicate the amount of time under the conditions defined below, until power automatically turns off due to battery failure. They do not guarantee that you will be able to achieve this level of operation.
APPENDIX ■ Rechargeable Lithium Ion Battery (NP-40) *2 Continuous Recording Conditions • Temperature: 23°C (73°F) • Monitor screen: On • Flash: Off • Image recorded every 12 seconds, alternating full wide-angle and full telephoto zoom Rated Voltage .................... 3.7 V Rated Capacitance ............ 1230 mAh Operating Temperature Range ..................................
APPENDIX ■ Rapid Carger (BC-30L) : Plug-in Type Power Requirement .......... 100 to 240V AC, 0.13A, 50/60Hz Output ................................. 4.2V DC, 900 mA Charging Temperature ..... 5°C to 35°C (41°F to 95°F) Chargeable Battery type ... Rechargeable lithium ion battery (NP-40) Full Charge Times ............. Approximately 2 hours Dimensions ........................ 80 (W) × 55 (H) × 25 (D) mm (3.1˝(W) × 2.2˝(H) × 0.98˝(D)) (excluding projections) Weight .................................