Instructions / Assembly

WALLBOARD
STUD
CENTERLINE
STUD
SECURE
INVISIBOLT
™
90º TO WALL
90º
90º
Slim Floating
Shelf
WARNING
x1 — Floating Shelf
x2 — Invisibolt
Parts
A
B
A
Way of locating studs within the wall (see hardware store for advice)
Tools Required
1/4" Wrench (6.35mm)
Hand Drill 1/8"(3mm)
Spirit Level
B
Do not allow children to play or hang from shelf
Maximum weight on properly installed shelf is 33lbs, 15 KGS evenly distributed.
Locate Stud behind wall at desired location for shelf.
Use actual shelf back to determine and mark where mounting holes need to be drilled.
Note: Holes in shelf should align with normal 16” stud distances.
Use spirit level to ensure shelf will be horizontal.
Drill 1/4” (6mm) pilot holes at 90º to wall.
Insert InvisiBolt™ into drill (See Fig: 1) and secure into holes from Step 3.
Note: If needed, adjust installed InvisiBolt™ with wrench to ensure 90° angle.
Attach shelves onto brackets, pressing completely against the wall.
1
2
3
4
5
IMPORTANT SAFETY NOTE
Beware of drilling into electrical wire or pipes within wall!
Clamp InvisiBolt
Bracket into drill for
easy installation
16" (406.5mm)
SHELF 2FT/3FT
23
5
/8" (600mm) / 35
1
/2" (900mm)
Alternative hole positions allow for sideways shelf
placement options. Select holes in shelf to match
stud distances (usually 16”).
16" (406.5mm)
Assembly instructions (24"/36")