THE BELSAW COMPANY Woodworking Machinery & Accessories 2156 Zanker Road , San Jose, CA 95131 1-800-468-4449 Fax 1-408-453-5515 www.belsaw.com 2004 Serving the Woodworking Industry since 1926! s e c i r P e Som hanged g C icin e r p v t Ha all for curren ec s a e l P Introducing to the Belsaw family: Now also stocking Planer/Molders from: Woodworking Machinery © The Belsaw Company 2004. We reserve the right to correct any typographical and pictorial errors when ordering.
Belsaw Planer / Molder Accessories Feedworks Chain Replacement Kit We stock all the current accessories for your 12” Belsaw, Foley-Belsaw, and Powermatic Planer/Molders! This kit contains the three drive chains in the model 985 feedworks system. Also included is the 20” V-Belt that transfers power from the cutterhead to the feedworks. Replacing all three chains at the same time will ensure longer sprocket life and deliver consistent transfer of drive power to the feed rollers.
Belsaw Planer / Molder Accessories Dial Indicator Knife Setting Gauge Belsaw Planer Knife Sets Position knives to within thousands of an inch. Once you set your knives using this gauge, you will never use anything else again. Large dial indicator face is easy to read. Indicator has 1” travel with secondary dial. Measures in increments of .001” Large indicator anvil and instructions are included. Belsaw Replacement Planer Knives Made from only the highest quality materials.
Belsaw Molding Knives Call for Prices All of our wood molding pattern knives are expertly ground from 1/4” thick high speed steel knife stock hardened to 65c on the Rockwell Scale. The profiles and sizes shown are those that reflect the most current popular wood moldings. Our molding knives come complete with all gibs and balance weights to match your selected knife pattern. Please note that certain patterns (such as the crown) require more than one knife to complete the pattern.
Call for Prices Belsaw Molding Knives Standard Cove Moldings 81 83 Profile # WP81 WP81 WP82 WP82 WP83 WP83 WP84 WP84 WP85 WP85 WP86 WP86 WP90 WP92 WP93 WP96 WP101 Size 11/16” x 3-1/4” 11/16” x 3-1/4” 11/16” x 2-3/4” 11/16” x 2-3/4” 11/16” x 2-5/8” 11/16” x 2-5/8” 11/16” x 2-1/4” 11/16” x 2-1/4” 11/16” x 1-3/4” 11/16” x 1-3/4” 11/16” x 1-5/8” 11/16” x 1-5/8” 3/4” x 1-1/8” 3/4” x 7/8” 3/4” x 3/4” 5/8” x 3/4” 1/2” x 1/2” 84 85 92 Top Bottom Top Bottom Top Bottom Top Bottom Top Bottom Top Bottom Single
Belsaw Molding Knives Call for Prices Standard Panel Moldings Wainscot Cap Moldings Commonly used to top off baseboard and panel wainscot. Mitered and snugged into the corners formed when a flat panel is recessed within a frame, this molding gives the appearance of richly carved paneling. Order # 4579503 4579523 Originally used on the rake of a building or around exterior window frames. Also commonly used to top off baseboard and panel wainscot.
Call for Prices Belsaw Molding Knives Size 11/16” x 3-1/2” 11/16” x 3-1/2” 11/16” x 3-1/2” 11/16” x 3-1/2” 11/16” x 3-1/2” 11/16” x 3-1/2” 5/8” x 3-1/2” Price $ 72.95 $ 88.95 $ 77.95 $ 77.95 $ 77.95 $ 77.95 $ 77.95 Standard & Antique Chair Rail Moldings 4579501 4579524 4579528 304 303 298 390 297 Chair rail moldings have become extremely popular over the years for use in new construction or renovation.
Call for Prices Belsaw Molding Knives Antique Base Moldings 4579405 4579416 #4579416 11/16” x 4-1/2”, Base molding . . . . . . . . . . . . . $ 97.95 #4579405 3/4” x 3”, Casing molding . . . . . . . . . . . . . . . . $ 84.95 Antique Base Moldings - Variable Width 4579411 These patterns will cut a decorative channel in your material. Therefore, you can make your molding as wide as you want. 3-3/8” #4579411 11/16” x 4”, Casing molding . . . . . . . . . . . . . . $ 94.
Call for Prices Belsaw Molding Knives Modified Casing & Base Moldings Antique Moldings - Variable Width Casing Patterns Many of our customers have requested that we expand our casing and base molding selection with larger and/or smaller versions of existing standard profiles. Generally used as trim for doors, windows and baseboards. Many older homes used these moldings around double hung windows, and to trim wood framed doorways between homes.
Call for Prices Belsaw Molding Knives Antique Batten & Panel Moldings Many of our customers have requested that we offer a line of antique profiles often found in homes constructed in the latter half of the nineteenth century. All of the profiles shown here were commonly used. We will continue to expand our selection of antique patterns in the coming years as their popularity dictates. Batten and panel moldings are very versatile since they can be used in a number of different applications.
Call for PricesBelsaw Molding Knives Modified Casing & Base Moldings 4570MUL-2 #4570MUL-2 4570MUL-1 #4570MUL-1 11/16” x 2-3/4”, Mullion molding . . . . . . $ 102.95 11/16” x 1-1/2” 4579510 #4579510 5/8” x 2-1/2”, Batten molding . . . . . . . . . . . . . $ 99.95 3/4” x 2-1/2”, Panel molding . . . . . . . . . . $ 99.95 1/2” x 1-1/2” #4579430 $ 72.95 #4579518 $ 72.95 #4579415 3/4” x 2-1/2” . . . . . . . . $ 73.95 #4579407 3/4” x 2-1/4” . . . . $ 63.95 #4579428 3/4” x 2-1/8” . . . . . . . .
Call for Prices Belsaw Molding Knives Standard Picture Moldings Decorative Hand Rail Moldings This profile is used to support hooks for picture frames. Installed around the perimeter of a room approximately 1-1/2” below the ceiling line. 273 276 4570HR-4 4570HR-1 4570HR-3 Order # 4570273 4570276 Profile # WP273 WP276 Size 11/16” x 1-3/4” 11/16” x 1-3/4” Price $ 92.95 $ 92.
Call for Prices Belsaw Molding Knives Rabbet Knife Sets Wedge Tongue & Groove Molding Rabbet Knives are 1” wide. You specify depth of cut. Ask for additional depth of cut rabbet knives. 1” 1” 1” 1” 1” 1” #4575502 #4575505 #4575506 #4575507 #4575508 #4575510 x x x x x x 1/4” . 3/8” . 7/16” 1/2” . 5/8” . 3/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Planer / Molders Williams & Hussey Planer / Molder Package • Produces Restoration Moldings, Straight Moldings, Round Top Moldings, Elliptical Moldings (with optional jig), Casings, Crowns, Base Caps, Chair Rails, Astragals, Raised Panels , and more! • 2 knife cutterhead • 2 HP, 1 phase, 110/220V motor • Feed rate: 15 FPM • Planes 7” wide • 8” max stock thickness • 9” min stock length • Weight: 220 lbs. Williams & Hussey Molding Profiles W&H supplies just about any molding knives you need.
Shop Fox® Molding Knives Shop Fox Molding Knives #D3338 $ 89.95 #D3337 $ 89.95 #D3336 $ 79.95 #D3334 $ 59.95 21/ 4” Cr ow n 23/ 4” Cr ow n 31/ 4” Cr ow n #D3335 $ 59.95 #D3333 $ 49.95 3-1/4” Base 3-1/4” Base 4-1/4” Base 2” Casing 3” Chair Rail #D3325 $ 39.95 2-1/2” Chair Rail 2-5/8” Chair Rail d ea B 4” 3/ 1- e ov C 4” 3/ 1- #D3324 $ 39.95 35/ 8” Cr ow n 41/ 4” Cr ow n 45/ 8” Cr ow n These High Speed Steel molding knives fit the W1693 Shop Fox Mini Molder/Planer.
Table Saws & Accessories Tenoning Attachments Shop Fox 10”Table Saw These jigs give you more adjustments to simplify cutting tenons and other wood joints on your table saw. Handles stock up to 3-1/4” thick. Miter slot bar is adjustable to ensure a secure table slot fit; keyed design prevents jig from tipping over or falling from table. • 52” Shop Fox Classic T-Fence • LEFT-TILT blade • One cast iron wing • Includes extension table with legs, standard and dado table inserts • Weight: 600 lbs.
Table Saws & Accessories Clamping Miter Gauge Shop Fox 10”Table Saw This Clamping Miter Gauge is safer than standard miter gauges. It has a comfortable D-handle grip, builtin sliding stop, and positive trigger clamping action. It fits standard miter gauge slots, 3/8” x 3/4”, with positive angle stops at 90° and 45° both left and right side.
Table Saws & Accessories Link Belt Shop Fox 10” Contractor-Style Table Saw Designed to reduce vibration between the motor and arbor, these belts are sectionalized so you can quickly make any size belt. This belt has the same cross section dimension as standard V-belts and is equivalent to a model A/4L (1/2”) belt. Resistant to oil, chemicals and high temperatures. #0418030 #0418130 1/2” x 5’ Link Belt . . . . . . . . . . . . . . $ 39.95 1/2” x 4’ Link Belt . . . . . . . . . . . . . . $ 31.
Mobile Bases Shop Fox Mobile Bases The SHOP FOX Adjustable Mobile bases are the first mobile bases designed strong enough to move heavy machines on a continual basis, be adjustable to fit a variety of machines and be leveled without the use the of shims or tools. To move the machine, you reach down and simply turn the knobs on the two plungers counter-clock wise to allow the weight of the machine to rest on the wheels, and then move the machine to the new location.
Magic Molder™ The Magic Molder Magic Molder Fence The Magic Molder Fence allows the user to expose a small portion of a plug without cutting into their tables fence. Equipped with two brackets which will fit all fences except the Delta Unifence. The Magic Molder Fence also has four tapped screws which are designed to accommodate templates for arch-moldings.
Magic Molder™ Magic Molder Plugs - continued (sold per pair) 3/4” wide material .375” #P20 $ 95.00 .643” 3/16”R .313” 3/32”R 1/8”R .406” #P21 #P20-3/16 $ 95.00 $ 95.00 1/2”R .713” .062” 1/8”R #P43 .062” 3/16”R $ 95.00 #P45 $ 95.00 #P46 $ 95.00 1/2” wide material 1/4”R .5” 5/16”R 5/16”R .187” .188” .25” 5/16”R #P22 $ 95.00 #P23 $ 95.00 #P28 $ 95.00 5/32”R 3/8”R 3/8”R #P29 #P31 .843” 9/64”R .094” .281” $ 95.00 $ 95.00 .312” 5/32”R #P32 5/32”R .125” .
Band Saws & Accessories Band Saw Blades Shop Fox 14” Band Saw Flex back premium band saw blades. 93-1/2” length fits all 14” Delta and Rockwell models, 14” Jet, and most other 14” models WITHOUT height attachment. 105” length fits all 14” Delta and Rockwell models, 14” Jet, and most other 14” models WITH height attachment.
Shapers • Scroll Saw Shop Fox 3 HP Shaper Shop Fox 16”VS Scroll Saw • 1/8 HP, 1 phase, 110V motor • Variable speed: 550 to 1,700 strokes per minute • 16” throat capacity • 2” maximum working thickness • 3/4” stroke length • Tilting table • Includes gooseneck work light, dust blower and dust port • Weight: 31 lbs.
Planers & Accessories Mini Planer Pal Knife Setting Jig Shop Fox 20” Planer • • • • • • • • • • • 5HP, 1 phase, 220V motor Magnetic Safety Switch Cutterhead Speed: 5,500 R.P.M. Feed Rates: 18 & 23 F.P.M. Cutting Width: 20" Cutting Height: 8" Max. Depth of Cut: 1/8" Cutterhead Diameter: 3-3/16" 4 H.S.S. Knives Anti-Kickback design Approx. Shipping weight: 778 lbs. This gauge is designed to quickly set up planer knives to a tolerance on ±.001" on standard 1-7/8" diameter cutterheads.
Planers & Accessories Flexible / Extending Roller Stand Shop Fox 15” Planer • Adjustable height from 26-1/4” to 37” • 9 Nickel plated rollers (1-1/2” x 20”) • Maximum extending length: 51” • Compacted length: 16-1/2” • 4” wheels with brakes • Loading capacity of 300 lbs. #50-167 Flexible roller stand . . . . . . . . . . . . . . . . . $ 219.
Jointers & Accessories Magnetic Jointer Knife Setting Jigs Shop Fox 8” Jointer This knife setting system allows you to get jointer knives in perfect alignment every time. It also allows you to shift nicked knives to get a perfect cut to an accuracy of ± .001" . For 4" to 8" jointers with HSS knives. #W1211 #W1210 Steel body jig . . . . . . . . . . . . . . . . . . . . . $ 49.95 Polycarbonate body jig . . . . . . . . . . . . . . . $ 29.
Lathe & Accessories Outside & Inside Calipers Shop Fox 8” x 12” Mini Lathe Stainless steel with hardened fulcrum spring and points for long life. Precision ground with threaded spool mechanism for infinite adjustment. • 1/3 HP, 1 phase, 120V motor • Variable speed: 700 to 3,200 RPM • 12” distance between centers • 8” swing over bed • 3/4” x 16 TPI RH spindle • Includes: MT #1 spur center, MT #1 live center, 4-1/4” and 7” tool rests, 53/4” face plate. • Weight: 45 lbs.
Sanders Abrasive Cleaning Pad for Wide Belt Sanders Shop Fox 24”Wide Belt Sander with Digital Readout • Numeric control pad and digital readout provide the ultimate in precision and ease of use.
Sanders 6” x 80” Sanding Belts Shop Fox 6” x 80” Edge Sander Part No. #6X80X60X #6X80X80X • 1-1/2HP, 1 phase, 110/220V (Prewired 220V) • Table size: 22" x 10-1/2" • Table travel: 5" • End sanding table allows for curved sanding • Belt speed: 1,800 FPM • Sanding head can be operated in any position between 0° to 90° for bevel sanding • 4" Dust port • Approx. shipping weight: 297 lbs. 2ea) 2ea) 2ea) 2ea) 2ea) #D1265 #D1266 #D1267 #D1268 #D1269 Price Each $ 11.52 $ 11.
Sanders 4” x 36” Sanding Belts Shop Fox 6” x 48” Belt & 10” Disc Sander Part No. 4X36X40X 4X36X50X 4X36X60X 4X36X80X 4X36X100X 4X36X120X 4X36X180X • 1HP, 1 phase, 110/220V motor • Precision Ground Cast Iron Table • Belt Speed: 2,300 FPM • Disc speed: 2,420 FPM • Vertical to horizontal belt head position • One tilting table will move from belt to disc unit • Heavy-Duty Miter Gauge • One 2” and one 2-1/2” dust port • Approx. Shipping Weight: 170 lbs. Price Each $ 8.25 $ 8.10 $ 7.50 $ 7.05 $ 6.85 $ 6.
Sanding Accessories Sanding Belts Portable Sanding Belts & Discs Aluminum Oxide, Resin bond, Open Coat “X”-weight for long life. If you wish, you may combine various belts in order to receive multiple quantity discounts. 1” x 30” Sanding Belts Part No. 1X30X50X 1X30X80X 1X30X100X 1X30X120X 1X30X180X 1X30X220X 1X30X320X Grit 50 80 100 120 180 220 320 Price Each $ 2.30 $ 2.30 $ 2.30 $ 2.30 $ 2.30 $ 2.30 $ 2.30 Price 5-9 $ 1.89 $ 1.89 $ 1.89 $ 1.89 $ 1.89 $ 1.89 $ 1.89 Price 10 + $ 1.59 $ 1.59 $ 1.
Drill Presses & Accessories Shop Fox 34” 5-Speed Floor Model Radial Drill Press Drill Press Utility Tray Keeps tools within easy reach; swings out of the way. Durable, textured plastic 11” diameter tray with metal swivel and mounting strap. Fits drill presses with column diameter ranging in size from 1-1/2” to 3-5/8”. • The radial arm drill press is one of the most versatile and handy drill presses you can add to your shop.
Drill Presses & Accessories Drum Sander Set Shop Fox 13-1/4" 12-Speed Oscillating Bench Drill Press This drum sander set includes three rubber sanding drums 4-1/4” in length to accommodate 1”, 1-1/2” and 2” diameter sanding sleeves.
Rosette Cutters Rosette Cutterhead & Knives Carbide Rosette Cutters This very popular Rosette cutterhead makes rosettes up to 3” in diameter. And, with the optional chuck arbor, you can adapt the cutterhead directly to a tailstock or spindle taper. Cutterhead comes complete with shank and mounts directly to a heavy-duty drill press or wood lathe with 1/2” chuck. Smooth cutting, one-piece rosette cutters feature shear cutting carbide-tipped edges fro both slicing and scraping action.
Drilling Accessories Steelex Forstner Bits 16-Piece HSS Hex Shank Forstner Bit Set With a center point for positioning, the scoring motion of the Forstner Bit's outer rim produces a clean, crisp entry and guides the bit accurately to the bottom of the hole. The shearing action of the Forstner Bit's inner cutting edges plane thin slices of wood directly upward and out of the hole reducing burning and chatter. 3/8” shank. 3-1/2” long.
Drilling Accessories Steelex HSS Brad Point Bits 13-Piece Spade Bit Set The woodworkers choice in boring bits. With precision cutting spurs and center point for accurate drilling, these High Speed Steel bits will last long in the toughest woods. One of the most complete spade bit sets available. Features bit sizes 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, and 1”. Includes wall rack.
Drilling Accessories Steelex 5-Piece Rotary Rasp Set 29-Piece Cobalt Drill Bit Set Quarter inch shank Rotary Rasp Set features five different shaping profiles to remove wood quickly with aggressive cutting teeth. Each Rotary Rasp mounts in 1/4" or larger variable speed drill for unsurpassed wood shaping ability. These premium bits are engineered to handle high tensile steels and hard-to-machine alloys and are typically used in aerospace applications.
Drilling Accessories & Mortiser BeadLOCK® Loose Tenon Joinery System A patented mortise and tenon joint that's made with a hand drill! Shop Fox Mortising Machine Now you can use your hand drill to make a joint that is stronger and more versatile than dowel, biscuit, or standard mortise and tenon joints. Loose tenon joinery provides an excellent means of joining two members particularly for deep joints and those joints where profiled parts come together like from matched cabinet cutters.
Dust Collectors Woodshop Dust Control Shop Fox 3 HP Dust Collector • • • • • • • • • A practical guide to respirators, shop vacuums, central collection systems, air-filtration devices, and more. Wood chips and sawdust in the woodshop are not just a nuisance -- they can also present a significant health hazard. But the good news is that Woodshop Dust Control, the first definitive and comprehensive book on the subject, shows you how to successfully control woodshop dust.
Dust Collection Accessories Blast Gates A blast gate enables you to maximize your dust collection system efficiency by allowing you to control air flow from one machine to another. Available both in plastic and aluminum. 4” inside diameter on one side and 4” outside diameter on the other to quickly provide an airtight fit. Seven-step adapter provides a multitude of dust collection reducing options. Simply cut away unneeded steps with a hacksaw.
Dust Collection Accessories • Air Cleaner Dust Collector Separator Just fit the dust collection separator onto any standard 32 gallon metal trash can between your machinery and dust collector system. Automatically removes heavy wood chips. Ideal when connected to planers and other machinery that create high volumes of wood waste. # W1049 $ 34.95 Mini Dust Collection Separator fits any 5 gallon bucket. Use with 2-1/2” diameter hose for shop vacs. #W2049 Mini Collector . . . . . . . . . . . . . . . . . $ 22.
Shop Accessories Brass Hammers Stanley Chisels Beautifully polished brass hammers provide mass for friendly persuasion, yet won’t mark harder metals. Perfect for metalworkers and machinists making delicate adjustments and for woodworkers using wood handled chisels.
Shop Accessories 6-Piece Diamond Cutting Disc Set These 180 grit diamond cutting discs can cut through steel, stone, glass or practically anything. Very useful for anyone with a rotary grinder. Comes complete with two arbors. 1/8” shank. 3-Piece Wood Rasp Set #D2472 . . . . . . . . . . . . . . . $ 10.95 #D3113 . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95 This 3-piece wood rasp set with rubber handles includes round rasp, flat rasp and half-round rasp. Ideal for wood carvers.
Shop Accessories Virutex Double Edge Trimmer The Very Efficient Carpenter Basic framing for residential construction. Here's your chance to become a more efficient carpenter. Larry Haun has been a production framer for more than 35 years and a teacher of apprentices for more than 20. In this book, Haun shows you, step by step, all the techniques he uses to frame a basic house, from laying down the sills to cutting the rafters. 213 pages. Softcover.
Shop Accessories 4-Piece Spatula Set Barber Scissors This 4-piece spatula set features eight different tip profiles for scraping and shaping a variety of materials. Knurled handles provide excellent grip control. Polished brass finger loops and precision ground matte steel finish cutting edges make these scissors highly decorative and functional. Blade length is 2-3/4” and overall length is 7-5/8”. #D3235 . . . . . . . . . . . . . . . . . . . . . . $ 9.95 #D3223 . . . . . . . . . . . . . . . . . . . .
Shop Accessories SharkSaw® Super FineCut Saw SharkSaw® Dowel Cutting Saw This saw features the thinnest blade (kerf 0.004”) of the entire SharkSaw line, and is supported by a spine for stability. With its extremely small tooth set (19 tpi), this saw can make exceptionally smooth, fine cuts in a variety of woods. Specifically, it’s great for cutting through extremely hard woods such as oak, ebony, and exotic imported species such as ironwood.
Shop Accessories HVLP Spray Gun with Regulator Deluxe Tool Belt with Padded Suspenders This tool belt features deep pockets, generous padding, ballistic nylon construction, sturdy metal buckle and ergonomic shoulder straps. Also features quick-release metal clips for tool pouches and shoulder straps. 16 pockets, 10 pencil/tool sleeves and 4 holsters (3 ballistic nylon and 1 hammer holster. Nothing compares to an HVLP spray gun when it comes to applying professional looking results.
Shop Accessories Depth Gauge Adhesive-Backed Measuring Tapes This 6” depth gauge makes precise depth measurements and features a knurled lock down screw, 1/32” measuring increments with easy-to-read vernier scale and a wide 3-1/2” base. Steel body makes this a pleasure to use. Precision steel, ready to mount on cut-off fences, table saws, or work benches. Tapes can be easily cut to shorter lengths. In 6’ or 12’ lengths, 1/2” or 3/4” wide, reading leftto-right or right-to-left.
Shop Accessories Aluminum Squares Plastic Protractor These high-precision aluminum squares are perfect for square layouts and machine set-ups. Each square features a heavyduty beam and beveled scale with inside and outside graduations. Measure any angle, bevel or slope. Long arm is 53/4” and the short is 3-1/4” long. Easy to read scale with brass knob to lock in any position. #D3068 #D3069 #D3070 #D3071 10” 12” 18” 24” Aluminum Aluminum Aluminum Aluminum #19070 . . . . . . . . . . . . . . . . . . . .
Shop Accessories Contour Gauges Professional contour gauge with plastic pins is ideal for joinery work, fitting tiles, carpets, linoleum, etc. Two gauges can be combined for a longer length if necessary. #800-2510 Plastic contour gauge . . . . . . $ 9.90 #837 Contour gauge w/ steel pins . . $ 8.15 Miter Squares Finely made tools which are extremely useful for layout and machine setup. The miter square (shown) checks 45° or 135° angles.
Shop Accessories Diamond Honing Cone Knife Hone & Guide This diamond honing cone is the perfect sharpening tool for radius carbide tipped router bits and shaper cutter and steel carving gouges. Great for keeping fish hooks sharp too with its special fish hook groove. Lanyard hole makes it easy to keep this item handy around the shop or favorite fishing hole. 400 grit. #D2473 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.
Shop Accessories Foam Brush Sets Disposable and ideal for all water and oil based stains and finishes. Brushes feature either wood or plastic handle for unsurpassed control. Use 3/4” brushes for detailing and small touchup work. #D2031 #D2490 #D2024 #D3247 24-Piece Foam Brush Set with wooden handles includes 10 - 1" brushes, 8 - 2" brushes and 6 - 3" brushes. Poly bagged. $ 7.95 24-Piece Foam Brush Set with plastic handles includes 10 - 1” brushes, 8 - 2” brushes and 6 3” brushes.
Shop Accessories “Hot Shot” Instant Glues Very fast acting, these adhesives will bond just about everything. Carefully read the descriptions below and select the adhesive that will best suit your needs. We also offer a sampler package below. The Original “Hot Stuff” - Bonds to clean and smooth surfaces. Use in any place a thin viscosity fast setting glue is required, such as chair joints that are loose. Setting time is incredibly fast at only 3 to 10 seconds. (Red label) #WHS1 1 oz . . . . . . . . . . . .
Shop Accessories Drawer Slide Brackets Euro-Style Hinges These brackets are used to mount drawer slides to the inside of metal frame computer cabinets. 2” width supports our three quarter and full extension drawer slides. Sold in pairs. Euro-Style Hinges are the industry standard because they provide superior cabinet door strength and they’re very easy to install and adjust.
Shop Accessories Plastic Knobs for Making Jigs & Fixtures Wood Joiner’s Handbook Make fixtures easier, quicker and in some cases, safer to use. The knobs are hard, black plastic like those on industrial machines. Ratchet levers are spring loaded to remain engaged until you lift and disengage them. Ideal for work in tight spaces.
Shop Accessories Steelex® Plus Router Bit Sets The Rebel Router Table Steelex Plus® router bit sets are made of high carbon steel bodies and are tipped with high-quality industrial grade tungsten carbide. Steelex Plus ® carbide is carefully selected and precision ground to give consistently clean cuts while maintaining a sharp, durable cutting edge. All Steelex Plus ® router bit sets come in attractive wooden boxes for added protection.
Shop Accessories Shop Pads Rousseau Basic Router Fence These premium quality neoprene rubber work pads are indispensable for routing, sanding, protecting tools, lining drawers, dampening vibration, and more. Pads are 24” wide x 36” long x 1/8” thick. • 24” long solid aluminum fence • Will accommodate router bits up to 3-7/8” dia. • Rear hardboard cover can be cut to match dust collection system • Includes mounting hardware and instructions #W1320 #W1322 Router pad . . . . . . . . . . . . . . . . . . .
Shop Accessories Bessey K-Body Clamps Pony 4-Corner Framing Clamp This clamp is designed so clamping pressure is distributed over the entire jaw surface. Non marring glue resistant jaw surfaces always remain parallel. Hardened rollers maintain sliding arm at right angle to rail. Applies equal pressure to the four corners of your picture frames, and casework to ensure that the frame is square and that the miters match. Each corner's pressure can be individually set.
Shop Accessories Jorgensen Bench Hold-Down Ulmia Spring Miter Clamps Excellent tool for gluing, repairing, or holddown projects. This glass-filled nylon holddown clamp is designed for workbenches and work tables. A versatile addition to any tool box. Quick and easy adjustments to and from the work using the release locking nut that slides freely on the threaded shaft. Serrated hold-down jaws prevent slipping and can adjust to work being clamped and locks into position with the locking lever.
Shop Accessories Kreg Pro Pack Adjustable Pocket Jig • Utilizes a unique three-hole spacing concept • Ability to horizontally space holes at 9/16”, 7/8” and 1-7/16” on center • Vertical settings to center holes in 1/2”, 3/4” and 1-1/2” thick material • Includes K2000 jig, R2 Rocket Jig, two wing supports, MKJ mini jig, Two extension blocks, FC6 6” face clamp, 3/8” step drill bit, depth collar, 3” and 6” driver, starter pack of 150 screws.
Shop Accessories Steelex® Red Polyurethane Casters Stanley Panel Carrier These casters feature a polyurethane wheel molded to a polypropylene hub with an oil-less bearing. They are excellent for a wide variety of applications where quiet operation, high wear factor and high corrosion resistance are a concern. We offer them in a number of configurations for a variety of applications.
Shop Accessories #9135-6 Table Saw Bench Guide Beds For any operation, special situation, or unusual problem that arises as you work, the answers are right in this guide. Find information on all the important cuts (including cross-cutting, mitering, beveling, and joinery) and facts on every dado head and what it does. Tips and shortcuts cover procedures from ripping to making mortises, and there's a safety survey and professional secrets for fine-tuning your table saw. 160 pages. Softcover.
Mail orders to: The Belsaw Company 90 Karina Court San Jose, CA 95131 ORDER FORM If you need more room, please use a separate piece of paper Sold To: (Please include the number above your name on the mailing label) Ship To: Please check here if your address has changed Customer # Name Name Address Address City City State Motor Freight Policy: Items weighing over 70 lbs. are required to ship via motor freight. Freight charges will be calculated at the time the order is placed.
PRSRT STD U.S. Postage Paid Sacramento, CA Permit #2214 THE BELSAW COMPANY 90 Karina Court San Jose, CA 95131 Visit us on the Web at: www.belsaw.com Order Toll Free! 1-800-468-4449 Mond ay - F rid ay 7:00am to 3 :00pm Pacific T ime 150-Piece Mega Brush Set TopSaver Rust Removal and Top Protectant Kit This Mega Brush Set includes 50 foam brushes with wooden handles, 50 bristle brushes with wooden handles and 50 glue brushes in assorted sizes.