Specifications

15
Table Saws & Accessories
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
• 52” Shop Fox Classic
T-Fence
• LEFT-TILT blade
• One cast iron wing
• Includes extension
table with legs, standard
and dado table inserts
• Weight: 600 lbs.
These jigs give you more adjust-
ments to simplify cutting tenons and
other wood joints on your table saw.
Handles stock up to 3-1/4” thick.
Miter slot bar is adjustable to
ensure a secure table slot fit;
keyed design prevents jig
from tipping over or falling
from table.
Tenoning Attachments
The NEW Incra Miter V27 is engi-
neered to provide a high perform-
ance, yet low cost upgrade for your
Table Saw, Band Saw, Router
Table, Disk Sander, Belt Sander or
any other tool in need of a better
miter gauge. Like all Incra Miter
Gauges, the V27 delivers extreme miter cutting accuracy through the
advanced combination of Incra’s exclusive AngleLOCK™ indexing system
and its patented Adjustable GlideLOCK™ Miter Bar. Now, the Incra Miter
V27 makes it possible to put an Incra Miter Gauge in EVERY miter chan-
nel in your shop!
Incra Miter Gauge
#MITERV27
$ 54.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#34-183
#JTG-10
#6284600
#50-050
$ 109.95
$ 123.95
$ 124.00
$ 99.00
Delta tenoning attachment . . . . . . . .
Jet tenoning attachment . . . . . . . . . .
Powermatic tenoning attachment . . .
General tenoning attachment . . . . . .
$ 1,149.00
3 HP, 1 phase, 220V motor • #W1677
$ 1,250.00
5 HP, 1 phase, 220V motor • #W1711
Shop Fox 10”Table Saw
• 26” Shop Fox Classic
T-Fence
• LEFT-TILT blade
• Two cast iron wings
• Includes standard and
dado table inserts
• Weight: 552 lbs.
Shown with D2057
Adjustable Mobile Base.
(Not Included)
Push Stick
This essential safety item
keeps hands a safe distance
from blades and cutters while still maintaining control of the workpiece
against machine fences. Measures 13-1/2” overall.
9-in-1 Saw Aid
Of course it works like (1) a safety push
stick, with a long, narrow hold-down sur-
face. But this tool also works as: (2) a
table saw depth gauge, (3) router depth
gauge, (4) 6” hook rule, (5) 30º/ 60º
angle gauge, (6) 45° angle gauge, (7) 9”
rule, (8) 90º engineers square, (9) cen-
ter finder. The depth gauges and center
finder are accurate to .005”; engineers
square is accurate to .01”. Heavy-duty,
glass-filled-nylon tool is guaranteed for 5
years against breakage!
#D3122
$ 8.95
Push Stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#19107
$ 15.95
9 in 1 Saw Aid . . . . . . . . . . . . . . . . . . . . . . .
Safe “V” Shoe
Unique because of a bottom groove
that applies pressure down and in
towards the fence. Made from high
density plastic. Sold per pair.
#825-1100
$ 3.45
. . . . . . . . . . . .
This wood feather board will keep your stock
tight against the rip fence and down on the
table during ripping operations giving you more
control. Will fit in standard 3/4" wide miter
slots.
Plastic Feather Board
Our plastic featherboard keeps stock up against the
fence on table saws, shapers, router tables, etc.
Fits in standard miter slots.
#D3096
$ 11.95
. . . . . . . . . . . . . . . . . . . . . .
#825-1450
$ 8.65
. . . . . . . . . . . . . . . . . . . . . . . .
Right Angle Jig
This amazingly affordable jig is con-
structed using top quality aluminum
castings and plates which are machined
to exacting tolerances. Cut tenons,
dados, rail ends, and finger joints safely
and with complete accuracy.
#W1500
$ 169.95
. . . . . . . . . . . . . .
#W1301
$ 12.95
Optional (shown) 6” vise clamps . . . . . . . .
Shop Fox 10”Table Saw
$ 1,350.00
3 HP, 1 phase, 220V motor • #W1677EXT1
$ 1,499.00
5 HP, 1 phase, 220V motor • #W1711EXT
Wood Feather Board