Specifications

17
Table Saws & Accessories
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
Shop Fox 10” Contractor-Style Table Saw
• 28” Shop Fox Aluma-Classic T-Fence
• 2 HP, 1 phase, 110/220V motor (prewired to
220V)
• RIGHT-TILT blade
• Two cast iron wings
• Built-in dust hood with
4” outlet
• Includes standard and
dado table inserts
• Weight: 310 lbs.
$ 699.00
#W1714
$ 650.00
#W1703
Shop Fox 10” Contractor-Style Table Saw
• 28” Shop Fox Aluma-Classic T-Fence
• 1-1/2 HP, 1 phase, 110/220V motor
• RIGHT-TILT blade
• Two stamped steel
wings
• Built-in dust hood with
4” outlet
• Includes standard and
dado table inserts
• Weight: 285 lbs.
Link Belt
Designed to reduce vibration between the
motor and arbor, these belts are sectional-
ized so you can quickly make any size belt.
This belt has the same cross section
dimension as standard V-belts and is equiv-
alent to a model A/4L (1/2”) belt.
Resistant to oil, chemicals and high tem-
peratures.
#0418030
#0418130
$ 39.95
$ 31.95
1/2” x 5’ Link Belt . . . . . . . . . . . . . .
1/2” x 4’ Link Belt . . . . . . . . . . . . . .
Glide Tape
Self-lubricating tape easily applies
to fences, jigs, any machine sur-
face. This special UHMW adhe-
sive backed flexible plastic film
has low friction qualities and a
high abrasion resistance.
#19420
#19425
#19430
$ 4.95
$ 9.95
$ 12.95
3/4” width x 6’ length . . . . . . . . . . .
2” width x 6’ length . . . . . . . . . . . . .
3” width x 6’ length . . . . . . . . . . . . .
Bostik Lubricant Sprays
Use TopCote to seal table tops and to protect
tools against corrosion. Also minimizes friction,
is anticorrosive and dries rapidly. DriCote
reduces friction thereby lowering cutting temper-
atures and prolonging tool life. Heat resistant to
550 degrees. Bearing Lube is especially effec-
tive on router bit bearings or to lubricate slides
and other height-load parts.
#205801
#205805
#204801
#204805
#209405
$ 13.95
$ 9.95
$ 16.40
$ 9.95
$ 11.95
10.75 oz TopCote . . . . . . . . . . . . . . . . . . . . . .
5.5 oz TopCote . . . . . . . . . . . . . . . . . . . . . . . .
10.75 oz DriCote . . . . . . . . . . . . . . . . . . . . . . .
5.5 oz DriCote . . . . . . . . . . . . . . . . . . . . . . . . .
5.5 oz Bearing Lube . . . . . . . . . . . . . . . . . . . .
Freud Thin Kerf Carbide Tipped Blades
Freud's “Thin Kerf” carbide tipped blades combine all
the top features of their Industrial blades to give you a
superior finished cut at an extremely affordable price. All
these blades feature Freud's exclusive anti-kickback
shoulder design for greater safety. The thin kerf requires less
cutting power both from you and the saw. Order number,
blade diameter, bore and number of teeth are listed.
Part No. Dia Bore Teeth Price
Ripping Blade
TK206 10” 5/8” 24 Flat $ 28.95
Finishing Blade
TK306 10” 5/8” 40 Flat $ 34.25
Fine Cutoff Blades
TK406 10” 5/8” 60 Flat $ 41.60
TK806 10” 5/8” 80 Flat $ 55.70
General Purpose Combination Blade
TK906 10” 5/8” 50 Flat $ 38.95
Visit the Belsaw website at:
www.belsaw.com
Finally, a rust removal kit that Really Works! It is a
Rust Remover/Lubricant/Surface Sealant/
Conditioner for metal surfaces. It completely
removes rust and corrosion from the pores of the
metal surface. It reduces sliding friction, eliminates
binding and surface hang-ups on tabletops, repels
moisture and seals the surface pores against
rust and corrosion. Includes 8 ounce
bottle of TopSaver, gloves, abrasive
pads and wiping cloths.
TopSaver Rust Removal and Top Protectant Kit
#TOPSAVER KIT
$ 19.99
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .