Specifications

1
Belsaw Planer / Molder Accessories
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
Feedworks Chain
Replacement Kit
This kit contains the three drive
chains in the model 985 feedworks
system. Also included is the 20” V-Belt
that transfers power from the cutterhead to
the feedworks. Replacing all three chains at the
same time will ensure longer sprocket life and deliv-
er consistent transfer of drive power to the feed rollers.
Complete Feedworks Rebuild Kit
Completely rebuild your planers
feedworks system with this kit.
Includes all sprockets, chains,
bushings, link adjustment
assemblies, 20” V_Belt, and sprock-
et weldments to replace worn out feed-
works systems. This kit will breathe new life
into your planer/molder, giving you many more
years of service. Will not fit on Belsaw planer/mold-
er models 910/912. Please contact Customer Service
for other models.
Replacement Feed Rollers
Replace your
worn feed
rollers with this genuine replacement. Manufactured to original specifica-
tions. Sold individually.
Feed Roller Rebuild Kits
Replace your planer/molder’s worn and grooved feed rollers to restore feed per-
formance. This kit includes the front and rear feed rollers, feed roller bush-
ings, and a complete set of feed roller tension springs. With this kit, any feed-
ing problems you may have should be eliminated.
Drive Bushing Replacement Kits
This kit contains all the bronze oilite bushings found in your planers feed-
works system. We suggest you replace all bushings at the same time.
Bed Elevation Repair Kit
Renew the elevation system with this kit that contains the four corner
sprockets, bushings and roller chain. Works on models 985, 910 and 912.
#BRK-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.95
#4509062
#4549008
12” Feed Roller . . . . . . . . . . . . . . . . . . . . . .$ 44.96
8” Feed Roller . . . . . . . . . . . . . . . . . . . . . . .$ 24/95
#BRK-4
#BRK-5
For model 985 . . . . . . . . . . . . . . . . . . . . . . . . $119.95
For models 910 & 912 . . . . . . . . . . . . . . . . . $119.95.
#BRK-1
#BRK-2
$ 34.95
$ 47.95
For model 985 . . . . . . . . . . . . . . . . . . . . . . . .
For models 910 & 912 . . . . . . . . . . . . . . . . . .
#BRK-6
#BRK-10
$ 22.95
$ 21.95
For model 985 . . . . . . . . . . . . . . . . . . . . . . . .
For models 910 & 912 . . . . . . . . . . . . . . . . . .
#BRK-7
$ 124.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aluminum Gib Replacement Kit
This set includes six 5-3/4” gibs, three 1” gibs, three 1” gib spacers and
all of the necessary socket set screws. Works on models 985, 910 and 912.
Drive Sprocket Replacement Kit
This kit contains all the sprockets found in your planer/molders feedworks
system. Kit fits only the current model 985 planer/molders.
“Tri-Sand”Abrasive Surfacing System
Install this optional accessory on your
12” planer-molder to convert it into a
surface sanding machine! Very easy to
install on the cutterhead of your 12”
planer/molder. With this accessory, you
will be able to sand away any remaining
mill marks on your planed lumber and
save yourself time from tedious hand
sanding. This system comes complete with all required aluminum gibs,
pulley, a set of three (3) 100-grit abrasive pads, and a V-Belt.
#BRK-8
$ 349.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#BRK-9
$ 79.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feed-Rate Increase Sprocket
Increase your 12” planer/molder’s feed rate by 60%!
With just the change of a sprocket, you can speed up
the feed rate of your Belsaw 12” planer up to 20 feet
per minute - a 60% increase over the standard 12 feet
per minute rate. Your owners manual leads you step
by step through installation. Ideal for owners who production-plane lumber.
Locking Caster Kit
Fits any Belsaw 12” Planer-Molder as well as the
Sears 12” Planer-Molders. Set includes 4 thread-
ed stem casters with a positive locking foot brake
for stability after being moved to the desired loca-
tion and all mounting hardware.
Planer Bed Wax
Extends the life of feed rollers, chains, bearings
and sprockets by reducing feed drag. Long last-
ing and very easy to apply. Does not contain sili-
cone. Use on virtually any machine surface.
Protects against corrosion. 14 ounce can.
#4500540
#3703040
#3703041
#3703042
$ 96.50
$ 8.25
$ 8.25
$ 8.25
Tri-Sand Attachment . . . . . . . . . . . . . . . . . . . .
80 Grit replacement sheets (3 per pack) . . . . . .
100 Grit replacement sheets (3 per pack) . . . . .
150 Grit replacement sheets (3 per pack) . . . . .
#4500551
#4509583
$ 49.95
$ 41.50
For model 910/912 planers . . . . . . . . . . . . . .
For models manufactured after 1983 . . . . . . .
#PTCW
$ 17.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#51610
#51612
$ 2.99
$ 3.49
For adjusting jack screws . . . . . . . . . . . .
For adjusting gib screws . . . . . . . . . . . . .
#4500526
$ 62.50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T-Handle Hex Keys
We stock all the
current accessories
for your 12”Belsaw,
Foley-Belsaw, and
Powermatic
Planer/Molders!