Specifications

43
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
Shop Accessories
Features two 1-3/16” perpendicular mounted
rollers. Perfect for gluing tight edges on lami-
nate and veneer projects. Hard plastic rollers
will not scratch most surfaces. Ergonomic han-
dle is designed for a sturdy grip.
Edge Roller
#D3215
$ 9.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#AU-93
#AU-93B
$ 12.95
$ 6.95
Double Edge Trimmer . . . . . . . . . . . . . . . . . . . .
Set of replacement knives . . . . . . . . . . . . . . . .
Great for installing lami-
nate, carpet, counter
tops, sheer vinyl, wall
panels and veneer.
Three 2-1/4” rubber
rollers for dependable
traction and 7-1/2” of non-marring coverage. Sturdy cast handle for
increased leverage. Extends from 20” to 35” with twist locking action.
Extension Roller
#D3211
$ 24.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trims both sides of the board simultane-
ously so you can cut your trimming time
in half. For edges up to 1.5" or 40 mm
wide. For wider edges, it can be used
as an independent one side trimmer.
Virutex Double Edge Trimmer
Manual end trimmer. It allows a per-
fect, clean and high quality cut on all
the corners of the board. No other fin-
ishing operations are needed.
Equipped with double sided blades.
Virutex Edge Trimmer
#RC21E
$ 37.50
. . . . . . . . . . . . . . . .
#JR3
$ 11.95
. . . . . . . . . . . . . . . . . . . .
#HI165
Hand Edge Banding Iron
For edge banding pre-glued tapes. Features quick
heat up time, thermostat, wood handle and heat
resistant base.
$ 52.95
. . . . . . . . . . . . . . . . . . . . . . . . . .
Pressure Roller
For veneer or plastic laminate. 3” x
1-1/2” black rubber roller. Two vinyl
ribbed grips. 1/2” zinc plated steel
handle.
“J”Rollers
Designed for applying pressure on veneer and
plastic laminates. Reaches into corners as roller
has no axle projection on one end. Stainless
steel or polyethylene roller.
#19595
#19596
#19597
#19598
$ 14.95
$ 24.95
$ 15.95
$ 33.95
1-1/2” wide poly roller . . . . . . . . . . . . . . . . .
1-1/2” wide steel roller . . . . . . . . . . . . . . . . .
3-1/2” wide poly roller . . . . . . . . . . . . . . . . .
3-1/2” wide steel roller . . . . . . . . . . . . . . . . .
Inside this gigantic manual, with more than 900 diagrams, illustra-
tions and photos, and over 600 pages of information, are all the
major methods of construction, following professional classifications.
Hundreds of topics extend from general requirements so important for
architects, engineers, and contractors; through analysis of building
sites; to the mechanics of fire protection, plumbing, valves, insula-
tion, and refrigeration. In-depth studies cover construction materials
and special construction. 608 pages. Softcover.
Encyclopedia of Construction Methods & Materials
In this heavily illustrated guide, master plumber, electrician and
inspector Rex Cauldwell offers insights from his years of experience,
presenting a rational sequence of inspection so that nothing gets
missed. Whether it’s an overloaded electrical panel, a driveway that
sends water into the basement when it rains, or a gas furnace that’s
improperly vented, Cauldwell shows you how to spot and evaluate
areas of concern. 272 pages. Softcover.
Inspecting a House
You are a contractor. You know your trade, and you're good at it. But
what about the unique financial and legal concerns of running a con-
struction business? Do you have the right tools for dealing with
money and the law? Attorney Jim Kramon provides all the informa-
tion you need to turn your hard work into greater financial security.
208 pages. Softcover.
Smart Business for Contractors
Essential information from builders, masons, and engineers.
Whether you are planning to build a new foundation, shore up an
old foundation, or pour a new driveway, this book will provide you
with the professional guidance you need to do the job right. In
these collected articles from Fine Homebuilding magazine, profes-
sional builders, masons, and engineers show you how. 144 pages.
Softcover.
Foundations & Concrete Work
Installing, building, and renovating. If you plan to cut a hole in a
perfectly good wall or roof, you'd better have sound advice on
how to go about it. This collection of 25 Fine Homebuilding arti-
cles won't disappoint you. You'll learn how to choose the best
new windows, restring double-hung windows and install and build
skylights. You'll also learn how to build shutters and window
frames and install casement, bay and arch-top windows. 112
pages. Softcover.
Windows & Skylights
$ 14.95
#70265
. . . . . . . . . . . . . . . . . . . . .
A solidly constructed frame is the key to a well-built house.
These 27 articles from Fine Homebuilding will explain how to
frame major building components, put up walls straighter and
faster, build solid squeak-free floors, and how efficient planning
and layout techniques can save time and money. Tradesmen and
homeowners alike will build better using these framing tricks,
methods and solutions. 144 pages. Hardcover.
Framing Floors,Walls,& Ceilings
Basic framing for residential construction. Here's your chance to
become a more efficient carpenter. Larry Haun has been a pro-
duction framer for more than 35 years and a teacher of appren-
tices for more than 20. In this book, Haun shows you, step by
step, all the techniques he uses to frame a basic house, from lay-
ing down the sills to cutting the rafters. 213 pages. Softcover.
The Very Efficient Carpenter
$ 22.95
#70455
. . . . . . . . . . . . . . . . . . . . . . . . . . .
#70656
$ 14.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#70538
$ 19.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#70459
$ 14.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#6851-6
$ 24.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#70569
$ 24.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .