Specifications

47
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
Shop Accessories
Adhesive-Backed Measuring Tapes
Precision steel, ready to mount on cut-off
fences, table saws, or work benches. Tapes
can be easily cut to shorter lengths. In 6’ or
12’ lengths, 1/2” or 3/4” wide, reading left-
to-right or right-to-left.
#79-056
#79-057
#79-061
#79-062
#79-065
#79-066
#79-068
#79-070
$ 14.19
$ 14.19
$ 14.19
$ 14.19
$ 19.00
$ 19.00
$ 13.00
$ 10.50
12’R 1/2” Metric/English . . . . . . . . . . . . . . . . . . .
12’L 1/2” Metric/English . . . . . . . . . . . . . . . . . . .
12’R 1/2” English . . . . . . . . . . . . . . . . . . . . . . . .
12’L 1/2” English . . . . . . . . . . . . . . . . . . . . . . . .
12’R 3/4” English . . . . . . . . . . . . . . . . . . . . . . . .
12’L 3/4” English . . . . . . . . . . . . . . . . . . . . . . . .
6’R 3/4” English . . . . . . . . . . . . . . . . . . . . . . . . .
6’L 1/2” English . . . . . . . . . . . . . . . . . . . . . . . . .
Precision Stop Block
Ideal for cutting multiple pieces to the
same size, this stop block also eliminates
marking and adjusting the workpiece to
the saw blade when cutting single pieces.
Features left and right side magnified
hairline cursors. Works with fences from
1-1/2” to 2” wide. Does not include
adhesive-backed measuring tape.
#W1109
$ 49.95
Dual pointer precision stop block . . . . . . . . . . .
This stainless steel fractional dial
caliper combines the same precision
that metalworkers are accustomed to with
a fractional scale for woodworkers. Perfect
for measuring board thickness, depth and
inside measurements. Dial reads 64ths
and .01”. Six inch capacity.
Precision caliper can measure
small part sizes and thickness
of everything from lumber to a sheet of paper. One-hand-
ed operation provides inside, outside and depth measurements in
precise .001" increments. Comes in a protective case.
$ 34.95
#D1052
6” Capacity dial caliper . . . . . . . . . . . . . . . . . .
6”Dial Caliper
#D3208
$ 39.95
. . . . . . . . . . . . . . . . . . .
Fractional Dial Caliper
Use this high quality 6”
caliper to measure thick-
ness, inside and outside
diameters and depths in
1/32” increments with easy-to-read vernier scale. Thumb stud
and lock down screw ensures accurate readings every time. Steel
construction makes for a long lasting tool.
Vernier Caliper
#D2801
$ 13.00
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#D2732
$ 5.00
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This 6” depth gauge
makes precise depth
measurements and
features a knurled lock
down screw, 1/32”
measuring increments with easy-to-read vernier scale and a
wide 3-1/2” base. Steel body makes this a pleasure to use.
Depth Gauge
#D2800
$ 13.00
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solid brass 4” caliper with
sliding dovetail way and rigid construction make this measur-
ing instrument indispensable for any craftsman. Small size is
perfect for the tool box or a pocket. Measuring range is 0 to 4”/100mm in
1/16” or 1mm graduations. Includes vernier scale.
Brass Caliper
$ 14.95
$ 20.50
#D1057
#D1058
1” travel x .001” indicator . . .
Magnetic base . . . . . . . . . . . .
Dial Indicator and Magnetic Base
Dial indicators are a necessity in any shop - woodwork-
ing and metalworking alike. Use them with magnetic
bases for measuring runout, setting up tool and check-
ing alignment. Magnetic base has a very strong mag-
net that is easily activated with a convenient switch.
Mounts at any angle and has a fine adjustment arm.
Stainless Steel
Ruler
Measure with absolute precision using this 12” stainless steel ruler with
increments as fine as 0.5mm and 1/64”.
Steel Hook
Rulers
Available in 12”, 18” and 24” lengths, these hook rulers make easy work
of edge alignment. Measuring in increments of 1/16”.
$ 3.75
$ 4.95
$ 6.95
#D2825
#D2826
#D2827
12” hook ruler . . . . . . . . . . . . . . . . . . . . . . . . . . .
18” hook ruler . . . . . . . . . . . . . . . . . . . . . . . . . . .
24” hook ruler . . . . . . . . . . . . . . . . . . . . . . . . . . .
#D2828
$ 1.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24”Aluminum Ruler with Handle
This multi-purpose ruler measures, levels, plumbs and provides a safe cut-
ting edge, so hands and fingers are away from the cutting blade.
Graduations are in inches and millimeters / centimeters.
#D3197
$ 9.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24”Aluminum Ruler
Use this aluminum ruler for all basic measurement needs. Machined to
exacting standards, this ruler will provide years of precise measurements.
Increments of 1/16” make this a truly versatile and precise tool for any
workshop.
#D2836
$ 8.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .