Specifications

48
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
Shop Accessories
Aluminum Squares
These high-precision aluminum
squares are perfect for square
layouts and machine set-ups.
Each square features a heavy-
duty beam and beveled scale
with inside and outside gradua-
tions.
#D3068
#D3069
#D3070
#D3071
$ 9.95
$ 12.95
$ 14.95
$ 18.95
10” Aluminum square . . . . . . . . . . . . . . . . . . .
12” Aluminum square . . . . . . . . . . . . . . . . . . .
18” Aluminum square . . . . . . . . . . . . . . . . . . .
24” Aluminum square . . . . . . . . . . . . . . . . . . .
This simple, yet effective marking gauge
has a single bevel edge wheel that scribes
a fine line without tearing the wood fibers
and does not wander with the woods
grain. Precision ground brass shoe glides
against the edge of the workpiece and the knurled brass knob makes adjust-
ments quick and easy. 8” long.
Wheel Marking Gauge
#D2822
$ 9.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For laying out large circles, this trammel/circle
marker set offers unsurpassed control and accu-
racy. Each trammel point with steel point or
replaceable lead is fully adjustable. Includes a
12” stainless steel ruler and extra lead.
$ 15.95
#D2331
. . . . . . . . . . . . . . . . . . .
Trammel / Circle Marking Set
Highest quality rosewood has brass wear strips on
the rubber face. One side is for marking mortises
and has a sliding adjustment mechanism. The
other side has a single pin which allows the tool
to be used as a traditional marking gauge. Also
features a knurled brass thumbscrew for locking the gauge in place.
Marking Gauge
#20150
$ 26.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Take the guesswork out of angles. Fully rota-
tional through 360° , the Mite-R-Gage uses
two legs that allows you to measure both
inside and outside angles, transfer exact
angles direct to stock, check corners for
squareness or set alignment of radial arm or table saw. It can layout simple
or compound miters. Overall length of each leg is 11-1/2”.
Mite-R-Gage
#605-1250
$ 24.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plastic Protractor
Measure any angle, bevel or slope. Long arm is 5-
3/4” and the short is 3-1/4” long. Easy to read
scale with brass knob to lock in any position.
$ 7.95
#19070
. . . . . . . . . . . . . . . . . . . . . . . . .
Precision made and ground, these are
square inside and out. Both blade and
stock are ground for straightness and
accuracy.
$ 11.25
$ 11.50
$ 14.50
#885-1002
#885-1004
#885-1006
2” Engineers square . . . . . . . . . . . . . . . . . . . .
4” Engineers square . . . . . . . . . . . . . . . . . . . .
6” Engineers square . . . . . . . . . . . . . . . . . . . .
Precision Machine Squares
Incra’s new line of precision squares and 45°s
are so accurate, they guarantee them! The
innovative one-piece design uses the most
advanced manufacturing methods available to
carve out a single, monolithic blade / handle
body from a solid slab of hardened aluminum.
The hefty construction of the 1/4” solid alloy
body and the 3/4” thick integrated alloy handle
just feels right in the palm of your hand. The
45° unit can double as a square.
$ 36.95
$ 45.95
$ 36.95
$ 45.95
#GSQR5
#GSQR7
#G455
#G457
5-1/2” square . . . . . . . . .
7-5/16” square . . . . . . . .
5-1/2” 45° . . . . . . . . . . .
7-5/16” 45° . . . . . . . . . .
Incra Guaranteed Squares & 45°s
#20130
#20135
#20140
Rosewood Try Squares
Made from the best quality rosewood
and tempered steel blades, these squares have a brass face for
protection against damage and wear. The blade is securely held
by steel rivets with surrounding inlayed brass plugs.
$ 14.95
$ 19.95
$ 22.95
4” Rosewood square . . . . . . . . . . . . . .
6” Rosewood square . . . . . . . . . . . . . .
9” Rosewood square . . . . . . . . . . . . . .
This set is great for the woodworker and
includes square, center, and protractor
heads on a 12” blade.
Combination Square Set
$ 40.60
#630-4200
. . . . . . . . . . . . . .
Empire Heavy-Duty Professional
Combination Square
• Use for making accurate 90° & 45°
markings, measuring and checking depth
• 12” stainless steel blade with 1/8”,
1/16”, 1/32” graduations
• Machined square head • Full view vial
• Self-aligning drawbolt • Hardened scriber
#0250
$ 11.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .